diff --git a/fancontrol.py b/fancontrol.py
index 992942f..eb9530e 100755
--- a/fancontrol.py
+++ b/fancontrol.py
@@ -35,7 +35,47 @@ for chk_device in devices_to_check:
             out = check_output(["sg_ses", dev_node], stderr=STDOUT)
             if 'ThinkServerSA120' in out:
                 device = dev_node
-                break
+                print("Enclosure found on " + device)
+
+                print_speeds(device)
+                print("Reading current configuration...")
+                out = check_output(["sg_ses", "-p", "0x2", device, "--raw"]).decode('utf-8')
+                s = out.split()
+
+                for i in range(0, 6):
+                    print("Setting fan {} to {}".format(i, fan))
+                    idx = 88 + 4 * i
+                    s[idx + 0] = "80"
+                    s[idx + 1] = "00"
+                    s[idx + 2] = "00"
+                    s[idx + 3] = format(1 << 5 | fan & 7, "x")
+
+                output = StringIO()
+                off = 0
+                count = 0
+                line = ''
+
+                while True:
+                    output.write(s[off])
+                    off = off + 1
+                    count = count + 1
+                    if count == 8:
+                        output.write("  ")
+                    elif count == 16:
+                        output.write("\n")
+                        count = 0
+                    else:
+                        output.write(" ")
+                    if off >= len(s):
+                        break
+
+                output.write("\n")
+                p = Popen(['sg_ses', '-p', '0x2', device, '--control', '--data', '-'], stdout=PIPE, stdin=PIPE,
+                          stderr=PIPE)
+                print("Set fan speeds... Waiting to get fan speeds (ctrl+c to skip)")
+                print(p.communicate(input=bytearray(output.getvalue(), 'utf-8'))[0].decode('utf-8'))
+                time.sleep(10)
+                print_speeds(device)
         except:
             print("Enclosure not found on " + dev_node)
 
@@ -43,43 +83,3 @@ if device == "":
     print("Could not find enclosure")
     sys.exit(1)
 
-print("Enclosure found on " + device);
-
-print_speeds(device)
-print("Reading current configuration...")
-out = check_output(["sg_ses", "-p", "0x2", device, "--raw"]).decode('utf-8')
-s = out.split()
-
-for i in range(0, 6):
-    print("Setting fan {} to {}".format(i, fan))
-    idx = 88 + 4 * i
-    s[idx + 0] = "80"
-    s[idx + 1] = "00"
-    s[idx + 2] = "00"
-    s[idx + 3] = format(1 << 5 | fan & 7, "x")
-
-output = StringIO()
-off = 0
-count = 0
-line = ''
-
-while True:
-    output.write(s[off])
-    off = off + 1
-    count = count + 1
-    if count == 8:
-        output.write("  ")
-    elif count == 16:
-        output.write("\n")
-        count = 0
-    else:
-        output.write(" ")
-    if off >= len(s):
-        break
-
-output.write("\n")
-p = Popen(['sg_ses', '-p', '0x2', device, '--control', '--data', '-'], stdout=PIPE, stdin=PIPE, stderr=PIPE)
-print("Set fan speeds... Waiting to get fan speeds (ctrl+c to skip)")
-print(p.communicate(input=bytearray(output.getvalue(), 'utf-8'))[0].decode('utf-8'))
-time.sleep(10)
-print_speeds(device)