Version v1.52.3

Previous to this change rclone cached the looked up root_folder_id in
the root_folder_id config variable.

This has caused a lot of confusion and a few attempts at workarounds
and ultimately was a mistake.

This reverts rclone attempting to cache anything in root_folder_id and
returns that variable to be entirely user modified.

It gives a little hint in the debug that rclone could be sped up
slightly by setting it, but it is up to the user to think about
whether that would be OK or not.

    Google drive root '': root_folder_id = "XXX" - save this in the config to speed up startup

It does not change root_folder_id itself, leaving this to the user.

See: https://forum.rclone.org/t/rclone-gdrive-no-longer-returning-anything/17215

.github/workflows/build.yml

@@ -227,7 +227,7 @@ jobs:
       - name: Cross-compile rclone
         run: |
           docker pull billziss/xgo-cgofuse
-          go get -v github.com/karalabe/xgo
+          GO111MODULE=off go get -v github.com/karalabe/xgo # don't add to go.mod
           xgo \
               -image=billziss/xgo-cgofuse \
               -targets=darwin/386,darwin/amd64,linux/386,linux/amd64,windows/386,windows/amd64 \

.github/workflows/build_publish_docker_image.yml

@@ -0,0 +1,25 @@
+name: Docker beta build
+
+on:
+    push:
+      branches:
+        - master
+
+jobs:
+    build:
+        runs-on: ubuntu-latest
+        name: Build image job
+        steps:
+            - name: Checkout master
+              uses: actions/checkout@v2
+              with:
+                fetch-depth: 0
+            - name: Build and publish image
+              uses: ilteoood/docker_buildx@439099796bfc03dd9cedeb72a0c7cb92be5cc92c
+              with:
+                tag: beta
+                imageName: rclone/rclone
+                platform: linux/amd64,linux/386,linux/arm64,linux/arm/v7
+                publish: true
+                dockerHubUser: ${{ secrets.DOCKER_HUB_USER }}
+                dockerHubPassword: ${{ secrets.DOCKER_HUB_PASSWORD }}

.github/workflows/build_publish_release_docker_image.yml

@@ -0,0 +1,33 @@
+name: Docker release build
+
+on:
+  release:
+    types: [published]
+
+jobs:
+    build:
+        runs-on: ubuntu-latest
+        name: Build image job
+        steps:
+            - name: Checkout master
+              uses: actions/checkout@v2
+              with:
+                fetch-depth: 0
+            - name: Get actual patch version
+              id: actual_patch_version
+              run: echo ::set-output name=ACTUAL_PATCH_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g')
+            - name: Get actual minor version
+              id: actual_minor_version
+              run: echo ::set-output name=ACTUAL_MINOR_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g' | cut -d "." -f 1,2)
+            - name: Get actual major version
+              id: actual_major_version
+              run: echo ::set-output name=ACTUAL_MAJOR_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g' | cut -d "." -f 1)
+            - name: Build and publish image
+              uses: ilteoood/docker_buildx@439099796bfc03dd9cedeb72a0c7cb92be5cc92c
+              with:
+                tag: latest,${{ steps.actual_patch_version.outputs.ACTUAL_PATCH_VERSION }},${{ steps.actual_minor_version.outputs.ACTUAL_MINOR_VERSION }},${{ steps.actual_major_version.outputs.ACTUAL_MAJOR_VERSION }}
+                imageName: rclone/rclone
+                platform: linux/amd64,linux/386,linux/arm64,linux/arm/v7
+                publish: true
+                dockerHubUser: ${{ secrets.DOCKER_HUB_USER }}
+                dockerHubPassword: ${{ secrets.DOCKER_HUB_PASSWORD }}

Dockerfile

@@ -3,7 +3,6 @@ FROM golang AS builder
 COPY . /go/src/github.com/rclone/rclone/
 WORKDIR /go/src/github.com/rclone/rclone/
 
-RUN make quicktest
 RUN \
   CGO_ENABLED=0 \
   make
@@ -12,7 +11,8 @@ RUN ./rclone version
 # Begin final image
 FROM alpine:latest
 
-RUN apk --no-cache add ca-certificates fuse
+RUN apk --no-cache add ca-certificates fuse tzdata && \
+  echo "user_allow_other" >> /etc/fuse.conf
 
 COPY --from=builder /go/src/github.com/rclone/rclone/rclone /usr/local/bin/
 

MANUAL.md

@@ -1,15 +1,15 @@
 % rclone(1) User Manual
 % Nick Craig-Wood
-% May 27, 2020
+% Aug 07, 2020
 
 # Rclone syncs your files to cloud storage
 
 <img width="50%" src="https://rclone.org/img/logo_on_light__horizontal_color.svg" alt="rclone logo" style="float:right; padding: 5px;" >
 
 - [About rclone](#about)
-- [What can rclone do for you](#what)
+- [What can rclone do for you?](#what)
-- [What features does rclone have](#features)
+- [What features does rclone have?](#features)
-- [What providers does rclone support](#providers)
+- [What providers does rclone support?](#providers)
 - [Download](https://rclone.org/downloads/)
 - [Install](https://rclone.org/install/)
 - [Donate.](https://rclone.org/donate/)
@@ -24,20 +24,20 @@ services, as well as standard transfer protocols.
 
 Rclone has powerful cloud equivalents to the unix commands rsync, cp,
 mv, mount, ls, ncdu, tree, rm, and cat. Rclone's familiar syntax
-includes shell pipeline support, and `--dry-run` protection. It can be
+includes shell pipeline support, and `--dry-run` protection. It is
 used at the command line, in scripts or via its [API](/rc).
 
-Users have called rclone *"The Swiss army knife of cloud storage"* and
+Users call rclone *"The Swiss army knife of cloud storage"*, and
 *"Technology indistinguishable from magic"*.
 
 Rclone really looks after your data. It preserves timestamps and
-verifies your data at all times. Transfers over limited bandwidth;
+verifies checksums at all times. Transfers over limited bandwidth;
 intermittent connections, or subject to quota can be restarted, from
 the last good file transferred. You can
 [check](https://rclone.org/commands/rclone_check/) the integrity of your files. Where
 possible, rclone employs server side transfers to minimise local
 bandwidth use and transfers from one provider to another without
-using your local disk.
+using local disk.
 
 Virtual backends wrap local and cloud file systems to apply
 [encryption](https://rclone.org/crypt/), 
@@ -45,9 +45,9 @@ Virtual backends wrap local and cloud file systems to apply
 [chunking](https://rclone.org/chunker/) and
 [joining](https://rclone.org/union/).
 
-Rclone can [mount](https://rclone.org/commands/rclone_mount/) any local, cloud or
+Rclone [mounts](https://rclone.org/commands/rclone_mount/) any local, cloud or
 virtual filesystem as a disk on Windows,
-macOS, linux and FreeBSD, and also serve these over
+macOS, linux and FreeBSD, and also serves these over
 [SFTP](https://rclone.org/commands/rclone_serve_sftp/),
 [HTTP](https://rclone.org/commands/rclone_serve_http/),
 [WebDAV](https://rclone.org/commands/rclone_serve_webdav/),
@@ -61,14 +61,14 @@ Fedora, Brew and Chocolatey repos. include rclone. For the latest
 version [downloading from rclone.org](https://rclone.org/downloads/) is recommended.
 
 Rclone is widely used on Linux, Windows and Mac. Third party
-developers have built innovative backup, restore, GUI and business
+developers create innovative backup, restore, GUI and business
 process solutions using the rclone command line or API.
 
-Let rclone do the heavy lifting of communicating with cloud storage.
+Rclone does the heavy lifting of communicating with cloud storage.
 
-## What can rclone do for you {#what}
+## What can rclone do for you? {#what}
 
-Rclone can help you:
+Rclone helps you:
 
 - Backup (and encrypt) files to cloud storage
 - Restore (and decrypt) files from cloud storage
@@ -96,7 +96,7 @@ Rclone can help you:
 
 ## Supported providers {#providers}
 
-(There are many other providers, built on standard protocols such as
+(There are many others, built on standard protocols such as
 WebDAV or S3, that work out of the box.)
 
 
@@ -330,7 +330,7 @@ kill %1
 
 ## Install from source ##
 
-Make sure you have at least [Go](https://golang.org/) 1.7
+Make sure you have at least [Go](https://golang.org/) 1.10
 installed.  [Download go](https://golang.org/dl/) if necessary.  The
 latest release is recommended. Then
 
@@ -339,16 +339,23 @@ latest release is recommended. Then
     go build
     ./rclone version
 
-You can also build and install rclone in the
+This will leave you a checked out version of rclone you can modify and
-[GOPATH](https://github.com/golang/go/wiki/GOPATH) (which defaults to
+send pull requests with. If you use `make` instead of `go build` then
-`~/go`) with:
+the rclone build will have the correct version information in it.
 
-    go get -u -v github.com/rclone/rclone
+You can also build the latest stable rclone with:
 
-and this will build the binary in `$GOPATH/bin` (`~/go/bin/rclone` by
+    go get github.com/rclone/rclone
-default) after downloading the source to
+
-`$GOPATH/src/github.com/rclone/rclone` (`~/go/src/github.com/rclone/rclone`
+or the latest version (equivalent to the beta) with
-by default).
+
+    go get github.com/rclone/rclone@master
+
+These will build the binary in `$(go env GOPATH)/bin`
+(`~/go/bin/rclone` by default) after downloading the source to the go
+module cache. Note - do **not** use the `-u` flag here. This causes go
+to try to update the depencencies that rclone uses and sometimes these
+don't work with the current version of rclone.
 
 ## Installation with Ansible ##
 
@@ -3126,11 +3133,24 @@ See the [global flags page](https://rclone.org/flags/) for global options not li
 
 # rclone obscure
 
-Obscure password for use in the rclone.conf
+Obscure password for use in the rclone config file
 
 ## Synopsis
 
-Obscure password for use in the rclone.conf
+In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](https://rclone.org/commands/rclone_config/) for more
+info.
 
 ```
 rclone obscure password [flags]
@@ -9670,7 +9690,7 @@ These flags are available for every command.
       --use-json-log                         Use json log format.
       --use-mmap                             Use mmap allocator (see docs).
       --use-server-modtime                   Use server modified time instead of object metadata
-      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.0")
+      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.3")
   -v, --verbose count                        Print lots more stuff (repeat for more)
 ```
 
@@ -9731,7 +9751,7 @@ and may be set in the config file.
       --cache-db-wait-time Duration                              How long to wait for the DB to be available - 0 is unlimited (default 1s)
       --cache-info-age Duration                                  How long to cache file structure information (directory listings, file size, times etc). (default 6h0m0s)
       --cache-plex-insecure string                               Skip all certificate verification when connecting to the Plex server
-      --cache-plex-password string                               The password of the Plex user
+      --cache-plex-password string                               The password of the Plex user (obscured)
       --cache-plex-url string                                    The URL of the Plex server
       --cache-plex-username string                               The username of the Plex user
       --cache-read-retries int                                   How many times to retry a read from a cache storage. (default 10)
@@ -9751,8 +9771,8 @@ and may be set in the config file.
   -L, --copy-links                                               Follow symlinks and copy the pointed to item.
       --crypt-directory-name-encryption                          Option to either encrypt directory names or leave them intact. (default true)
       --crypt-filename-encryption string                         How to encrypt the filenames. (default "standard")
-      --crypt-password string                                    Password or pass phrase for encryption.
+      --crypt-password string                                    Password or pass phrase for encryption. (obscured)
-      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended.
+      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended. (obscured)
       --crypt-remote string                                      Remote to encrypt/decrypt.
       --crypt-show-mapping                                       For all files listed show how the names encrypt.
       --drive-acknowledge-abuse                                  Set to allow files which return cannotDownloadAbusiveFile to be downloaded.
@@ -9803,7 +9823,7 @@ and may be set in the config file.
       --ftp-encoding MultiEncoder                                This sets the encoding for the backend. (default Slash,Del,Ctl,RightSpace,Dot)
       --ftp-host string                                          FTP host to connect to
       --ftp-no-check-certificate                                 Do not verify the TLS certificate of the server
-      --ftp-pass string                                          FTP password
+      --ftp-pass string                                          FTP password (obscured)
       --ftp-port string                                          FTP port, leave blank to use default (21)
       --ftp-tls                                                  Use FTP over TLS (Implicit)
       --ftp-user string                                          FTP username, leave blank for current username, $USER
@@ -9840,7 +9860,7 @@ and may be set in the config file.
       --koofr-encoding MultiEncoder                              This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
       --koofr-endpoint string                                    The Koofr API endpoint to use (default "https://app.koofr.net")
       --koofr-mountid string                                     Mount ID of the mount to use. If omitted, the primary mount is used.
-      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)
+      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password) (obscured)
       --koofr-setmtime                                           Does the backend support setting modification time. Set this to false if you use a mount ID that points to a Dropbox or Amazon Drive backend. (default true)
       --koofr-user string                                        Your Koofr user name
   -l, --links                                                    Translate symlinks to/from regular files with a '.rclonelink' extension
@@ -9853,7 +9873,7 @@ and may be set in the config file.
       --local-nounc string                                       Disable UNC (long path names) conversion on Windows
       --mailru-check-hash                                        What should copy do if file checksum is mismatched or invalid (default true)
       --mailru-encoding MultiEncoder                             This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
-      --mailru-pass string                                       Password
+      --mailru-pass string                                       Password (obscured)
       --mailru-speedup-enable                                    Skip full upload if there is another file with same data hash. (default true)
       --mailru-speedup-file-patterns string                      Comma separated list of file name patterns eligible for speedup (put by hash). (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf")
       --mailru-speedup-max-disk SizeSuffix                       This option allows you to disable speedup (put by hash) for large files (default 3G)
@@ -9862,7 +9882,7 @@ and may be set in the config file.
       --mega-debug                                               Output more debug from Mega.
       --mega-encoding MultiEncoder                               This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
       --mega-hard-delete                                         Delete files permanently rather than putting them into the trash.
-      --mega-pass string                                         Password.
+      --mega-pass string                                         Password. (obscured)
       --mega-user string                                         User name
   -x, --one-file-system                                          Don't cross filesystem boundaries (unix/macOS only).
       --onedrive-chunk-size SizeSuffix                           Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10M)
@@ -9875,11 +9895,12 @@ and may be set in the config file.
       --onedrive-server-side-across-configs                      Allow server side operations (eg copy) to work across different onedrive configs.
       --opendrive-chunk-size SizeSuffix                          Files will be uploaded in chunks this size. (default 10M)
       --opendrive-encoding MultiEncoder                          This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
-      --opendrive-password string                                Password.
+      --opendrive-password string                                Password. (obscured)
       --opendrive-username string                                Username
       --pcloud-client-id string                                  Pcloud App Client Id
       --pcloud-client-secret string                              Pcloud App Client Secret
       --pcloud-encoding MultiEncoder                             This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
+      --pcloud-hostname string                                   Hostname to connect to. (default "api.pcloud.com")
       --pcloud-root-folder-id string                             Fill in for rclone to use a non root folder as its starting point. (default "d0")
       --premiumizeme-encoding MultiEncoder                       This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Del,Ctl,InvalidUtf8,Dot)
       --putio-encoding MultiEncoder                              This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
@@ -9926,19 +9947,19 @@ and may be set in the config file.
       --seafile-create-library                                   Should rclone create a library if it doesn't exist
       --seafile-encoding MultiEncoder                            This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8)
       --seafile-library string                                   Name of the library. Leave blank to access all non-encrypted libraries.
-      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
+      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line. (obscured)
-      --seafile-pass string                                      Password
+      --seafile-pass string                                      Password (obscured)
       --seafile-url string                                       URL of seafile host to connect to
       --seafile-user string                                      User name (usually email address)
       --sftp-ask-password                                        Allow asking for SFTP password when needed.
       --sftp-disable-hashcheck                                   Disable the execution of SSH commands to determine if remote file hashing is available.
       --sftp-host string                                         SSH host to connect to
       --sftp-key-file string                                     Path to PEM-encoded private key file, leave blank or set key-use-agent to use ssh-agent.
-      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file.
+      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file. (obscured)
       --sftp-key-pem string                                      Raw PEM-encoded private key, If specified, will override key_file parameter.
       --sftp-key-use-agent                                       When set forces the usage of the ssh-agent.
       --sftp-md5sum-command string                               The command used to read md5 hashes. Leave blank for autodetect.
-      --sftp-pass string                                         SSH password, leave blank to use ssh-agent.
+      --sftp-pass string                                         SSH password, leave blank to use ssh-agent. (obscured)
       --sftp-path-override string                                Override path used by SSH connection.
       --sftp-port string                                         SSH port, leave blank to use default (22)
       --sftp-set-modtime                                         Set the modified time on the remote if set. (default true)
@@ -9996,7 +10017,7 @@ and may be set in the config file.
       --union-upstreams string                                   List of space separated upstreams.
       --webdav-bearer-token string                               Bearer token instead of user/pass (eg a Macaroon)
       --webdav-bearer-token-command string                       Command to run to get a bearer token
-      --webdav-pass string                                       Password.
+      --webdav-pass string                                       Password. (obscured)
       --webdav-url string                                        URL of http host to connect to
       --webdav-user string                                       User name
       --webdav-vendor string                                     Name of the Webdav site/service/software you are using
@@ -13622,6 +13643,8 @@ The username of the Plex user
 
 The password of the Plex user
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      plex_password
 - Env Var:     RCLONE_CACHE_PLEX_PASSWORD
 - Type:        string
@@ -14880,6 +14903,8 @@ NB If filename_encryption is "off" then this option will do nothing.
 
 Password or pass phrase for encryption.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_CRYPT_PASSWORD
 - Type:        string
@@ -14890,6 +14915,8 @@ Password or pass phrase for encryption.
 Password or pass phrase for salt. Optional but recommended.
 Should be different to the previous password.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password2
 - Env Var:     RCLONE_CRYPT_PASSWORD2
 - Type:        string
@@ -15318,6 +15345,10 @@ FTP is the File Transfer Protocol. FTP support is provided using the
 [github.com/jlaffaye/ftp](https://godoc.org/github.com/jlaffaye/ftp)
 package.
 
+Paths are specified as `remote:path`. If the path does not begin with
+a `/` it is relative to the home directory of the user.  An empty path
+`remote:` refers to the user's home directory.
+
 Here is an example of making an FTP configuration.  First run
 
     rclone config
@@ -15480,6 +15511,8 @@ FTP port, leave blank to use default (21)
 
 FTP password
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_FTP_PASS
 - Type:        string
@@ -16426,7 +16459,7 @@ For shortcuts pointing to folders:
 - When deleting with `rclone rmdir` or `rclone purge` the shortcut is deleted not the linked folder.
 - **NB** When deleting with `rclone remove` or `rclone mount` the contents of the linked folder will be deleted.
 
-It isn't currently possible to create shortcuts with rclone.
+The [rclone backend](https://rclone.org/commands/rclone_backend/) command can be used to create shortcuts.  
 
 Shortcuts can be completely ignored with the `--drive-skip-shortcuts` flag
 or the corresponding `skip_shortcuts` configuration setting.
@@ -16603,9 +16636,6 @@ Leave blank normally.
 Fill in to access "Computers" folders (see docs), or for rclone to use
 a non root folder as its starting point.
 
-Note that if this is blank, the first time rclone runs it will fill it
-in with the ID of the root folder.
-
 
 - Config:      root_folder_id
 - Env Var:     RCLONE_DRIVE_ROOT_FOLDER_ID
@@ -17208,6 +17238,13 @@ the remote configuration, it's not such a big deal).
 
 (Thanks to @balazer on github for these instructions.)
 
+Sometimes, creation of an OAuth consent in Google API Console fails due to an error message
+“The request failed because changes to one of the field of the resource is not supported”.
+As a convenient workaround, the necessary Google Drive API key can be created on the
+[Python Quickstart](https://developers.google.com/drive/api/v3/quickstart/python) page.
+Just push the Enable the Drive API button to receive the Client ID and Secret.
+Note that it will automatically create a new project in the API Console.
+
  Google Photos
 -------------------------------------------------
 
@@ -18312,6 +18349,8 @@ Your Koofr user name
 
 Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_KOOFR_PASSWORD
 - Type:        string
@@ -18544,6 +18583,8 @@ User name (usually email)
 
 Password
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_MAILRU_PASS
 - Type:        string
@@ -18842,6 +18883,8 @@ User name
 
 Password.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_MEGA_PASS
 - Type:        string
@@ -19419,7 +19462,7 @@ requests.
 If you are having problems with them (E.g., seeing a lot of throttling), you can get your own
 Client ID and Key by following the steps below:
 
-1. Open https://portal.azure.com/#blade/Microsoft_AAD_RegisteredApps/ApplicationsListBlade, then click `New registration`.
+1. Open https://portal.azure.com/#blade/Microsoft_AAD_RegisteredApps/ApplicationsListBlade and then click `New registration`.
 2. Enter a name for your app, choose account type `Accounts in any organizational directory (Any Azure AD directory - Multitenant) and personal Microsoft accounts (e.g. Skype, Xbox)`, select `Web` in `Redirect URI` Enter `http://localhost:53682/` and click Register. Copy and keep the `Application (client) ID` under the app name for later use.
 3. Under `manage` select `Certificates & secrets`, click `New client secret`. Copy and keep that secret for later use.
 4. Under `manage` select `API permissions`, click `Add a permission` and select `Microsoft Graph` then select `delegated permissions`.
@@ -19818,6 +19861,8 @@ Username
 
 Password.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_OPENDRIVE_PASSWORD
 - Type:        string
@@ -20837,6 +20882,17 @@ Fill in for rclone to use a non root folder as its starting point.
 - Type:        string
 - Default:     "d0"
 
+#### --pcloud-hostname
+
+Hostname to connect to.
+
+This is normally set when rclone initially does the oauth connection.
+
+- Config:      hostname
+- Env Var:     RCLONE_PCLOUD_HOSTNAME
+- Type:        string
+- Default:     "api.pcloud.com"
+
 
 
  premiumize.me
@@ -21394,6 +21450,8 @@ User name (usually email address)
 
 Password
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_SEAFILE_PASS
 - Type:        string
@@ -21421,6 +21479,8 @@ Name of the library. Leave blank to access all non-encrypted libraries.
 
 Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      library_key
 - Env Var:     RCLONE_SEAFILE_LIBRARY_KEY
 - Type:        string
@@ -21650,6 +21710,8 @@ SSH port, leave blank to use default (22)
 
 SSH password, leave blank to use ssh-agent.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_SFTP_PASS
 - Type:        string
@@ -21680,6 +21742,8 @@ The passphrase to decrypt the PEM-encoded private key file.
 Only PEM encrypted key files (old OpenSSH format) are supported. Encrypted keys
 in the new OpenSSH format can't be used.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      key_file_pass
 - Env Var:     RCLONE_SFTP_KEY_FILE_PASS
 - Type:        string
@@ -22778,6 +22842,8 @@ User name
 
 Password.
 
+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_WEBDAV_PASS
 - Type:        string
@@ -23596,6 +23662,96 @@ Options:
 
 # Changelog
 
+## v1.52.3 - 2020-08-07
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.2...v1.52.3)
+
+* Bug Fixes
+    * docs
+        * Disable smart typography (eg en-dash) in MANUAL.* and man page (Nick Craig-Wood)
+        * Update install.md to reflect minimum Go version (Evan Harris)
+        * Update install from source instructions (Nick Craig-Wood)
+        * make_manual: Support SOURCE_DATE_EPOCH (Morten Linderud)
+    * log: Fix --use-json-log going to stderr not --log-file on Windows (Nick Craig-Wood)
+    * serve dlna: Fix file list on Samsung Series 6+ TVs (Matteo Pietro Dazzi)
+    * sync: Fix deadlock with --track-renames-strategy modtime (Nick Craig-Wood)
+* Cache
+    * Fix moveto/copyto remote:file remote:file2 (Nick Craig-Wood)
+* Drive
+    * Stop using root_folder_id as a cache (Nick Craig-Wood)
+    * Make dangling shortcuts appear in listings (Nick Craig-Wood)
+    * Drop "Disabling ListR" messages down to debug (Nick Craig-Wood)
+    * Workaround and policy for Google Drive API (Dmitry Ustalov)
+* FTP
+    * Add note to docs about home vs root directory selection (Nick Craig-Wood)
+* Onedrive
+    * Fix reverting to Copy when Move would have worked (Nick Craig-Wood)
+    * Avoid comma rendered in URL in onedrive.md (Kevin)
+* Pcloud
+    * Fix oauth on European region "eapi.pcloud.com" (Nick Craig-Wood)
+* S3
+    * Fix bucket Region auto detection when Region unset in config (Nick Craig-Wood)
+
+## v1.52.2 - 2020-06-24
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.1...v1.52.2)
+
+* Bug Fixes
+    * build
+        * Fix docker release build action (Nick Craig-Wood)
+        * Fix custom timezone in Docker image (NoLooseEnds)
+    * check: Fix misleading message which printed errors instead of differences (Nick Craig-Wood)
+    * errors: Add WSAECONNREFUSED and more to the list of retriable Windows errors (Nick Craig-Wood)
+    * rcd: Fix incorrect prometheus metrics (Gary Kim)
+    * serve restic: Fix flags so they use environment variables (Nick Craig-Wood)
+    * serve webdav: Fix flags so they use environment variables (Nick Craig-Wood)
+    * sync: Fix --track-renames-strategy modtime (Nick Craig-Wood)
+* Drive
+    * Fix not being able to delete a directory with a trashed shortcut (Nick Craig-Wood)
+    * Fix creating a directory inside a shortcut (Nick Craig-Wood)
+    * Fix --drive-impersonate with cached root_folder_id (Nick Craig-Wood)
+* SFTP
+    * Fix SSH key PEM loading (Zac Rubin)
+* Swift
+    * Speed up deletes by not retrying segment container deletes (Nick Craig-Wood)
+* Tardigrade
+    * Upgrade to uplink v1.1.1 (Caleb Case)
+* WebDAV
+    * Fix free/used display for rclone about/df for certain backends (Nick Craig-Wood)
+
+## v1.52.1 - 2020-06-10
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1)
+
+* Bug Fixes
+    * lib/file: Fix SetSparse on Windows 7 which fixes downloads of files > 250MB (Nick Craig-Wood)
+    * build
+        * Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)
+        * Remove quicktest from Dockerfile (Nick Craig-Wood)
+        * Build Docker images with GitHub actions (Matteo Pietro Dazzi)
+        * Update Docker build workflows (Nick Craig-Wood)
+        * Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)
+        * Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
+    * docs
+        * Add link to source and modified time to footer of every page (Nick Craig-Wood)
+        * Remove manually set dates and use git dates instead (Nick Craig-Wood)
+        * Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)
+        * Remove leading slash in page reference in footer when present (Nick Craig-Wood)
+        * Note commands which need obscured input in the docs (Nick Craig-Wood)
+        * obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)
+* VFS
+    * Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)
+* Drive
+    * Fix missing items when listing using --fast-list / ListR (Nick Craig-Wood)
+* Putio
+    * Fix panic on Object.Open (Cenk Alti)
+* S3
+    * Fix upload of single files into buckets without create permission (Nick Craig-Wood)
+    * Fix --header-upload (Nick Craig-Wood)
+* Tardigrade
+    * Fix listing bug by upgrading to v1.0.7
+    * Set UserAgent to rclone (Caleb Case)
+
 ## v1.52.0 - 2020-05-27
 
 Special thanks to Martin Michlmayr for proof reading and correcting

Makefile

@@ -105,16 +105,16 @@ tidy:
 doc:	rclone.1 MANUAL.html MANUAL.txt rcdocs commanddocs
 
 rclone.1:	MANUAL.md
-	pandoc -s --from markdown --to man MANUAL.md -o rclone.1
+	pandoc -s --from markdown-smart --to man MANUAL.md -o rclone.1
 
 MANUAL.md:	bin/make_manual.py docs/content/*.md commanddocs backenddocs
 	./bin/make_manual.py
 
 MANUAL.html:	MANUAL.md
-	pandoc -s --from markdown --to html MANUAL.md -o MANUAL.html
+	pandoc -s --from markdown-smart --to html MANUAL.md -o MANUAL.html
 
 MANUAL.txt:	MANUAL.md
-	pandoc -s --from markdown --to plain MANUAL.md -o MANUAL.txt
+	pandoc -s --from markdown-smart --to plain MANUAL.md -o MANUAL.txt
 
 commanddocs: rclone
 	XDG_CACHE_HOME="" XDG_CONFIG_HOME="" HOME="\$$HOME" USER="\$$USER" rclone gendocs docs/content/

VERSION

@@ -1 +1 @@
-v1.52.0
+v1.52.3

backend/cache/cache_internal_test.go

@@ -33,6 +33,7 @@ import (
 	"github.com/rclone/rclone/fs/object"
 	"github.com/rclone/rclone/fs/rc"
 	"github.com/rclone/rclone/fstest"
+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/lib/random"
 	"github.com/rclone/rclone/vfs"
 	"github.com/rclone/rclone/vfs/vfsflags"
@@ -299,6 +300,7 @@ func TestInternalRemoteWrittenFileFoundInMount(t *testing.T) {
 }
 
 func TestInternalCachedWrittenContentMatches(t *testing.T) {
+	testy.SkipUnreliable(t)
 	id := fmt.Sprintf("ticwcm%v", time.Now().Unix())
 	rootFs, boltDb := runInstance.newCacheFs(t, remoteName, id, false, true, nil, nil)
 	defer runInstance.cleanupFs(t, rootFs, boltDb)
@@ -342,6 +344,7 @@ func TestInternalDoubleWrittenContentMatches(t *testing.T) {
 }
 
 func TestInternalCachedUpdatedContentMatches(t *testing.T) {
+	testy.SkipUnreliable(t)
 	id := fmt.Sprintf("ticucm%v", time.Now().Unix())
 	rootFs, boltDb := runInstance.newCacheFs(t, remoteName, id, false, true, nil, nil)
 	defer runInstance.cleanupFs(t, rootFs, boltDb)

backend/drive/drive.go

@@ -24,6 +24,7 @@ import (
 	"strconv"
 	"strings"
 	"sync"
+	"sync/atomic"
 	"text/template"
 	"time"
 
@@ -56,6 +57,7 @@ const (
 	rcloneEncryptedClientSecret = "eX8GpZTVx3vxMWVkuuBdDWmAUE6rGhTwVrvG9GhllYccSdj2-mvHVg"
 	driveFolderType             = "application/vnd.google-apps.folder"
 	shortcutMimeType            = "application/vnd.google-apps.shortcut"
+	shortcutMimeTypeDangling    = "application/vnd.google-apps.shortcut.dangling" // synthetic mime type for internal use
 	timeFormatIn                = time.RFC3339
 	timeFormatOut               = "2006-01-02T15:04:05.000000000Z07:00"
 	defaultMinSleep             = fs.Duration(100 * time.Millisecond)
@@ -68,6 +70,8 @@ const (
 	minChunkSize     = 256 * fs.KibiByte
 	defaultChunkSize = 8 * fs.MebiByte
 	partialFields    = "id,name,size,md5Checksum,trashed,modifiedTime,createdTime,mimeType,parents,webViewLink,shortcutDetails"
+	listRGrouping    = 50   // number of IDs to search at once when using ListR
+	listRInputBuffer = 1000 // size of input buffer when using ListR
 )
 
 // Globals
@@ -220,9 +224,6 @@ Leave blank normally.
 
 Fill in to access "Computers" folders (see docs), or for rclone to use
 a non root folder as its starting point.
-
-Note that if this is blank, the first time rclone runs it will fill it
-in with the ID of the root folder.
 `,
 		}, {
 			Name: "service_account_file",
@@ -348,7 +349,7 @@ date is used.`,
 		}, {
 			Name:     "impersonate",
 			Default:  "",
-			Help:     "Impersonate this user when using a service account.",
+			Help:     `Impersonate this user when using a service account.`,
 			Advanced: true,
 		}, {
 			Name:    "alternate_export",
@@ -558,6 +559,9 @@ type Fs struct {
 	isTeamDrive      bool               // true if this is a team drive
 	fileFields       googleapi.Field    // fields to fetch file info with
 	m                configmap.Mapper
+	grouping         int32               // number of IDs to search at once in ListR - read with atomic
+	listRmu          *sync.Mutex         // protects listRempties
+	listRempties     map[string]struct{} // IDs of supposedly empty directories which triggered grouping disable
 }
 
 type baseObject struct {
@@ -1079,11 +1083,14 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 	}
 
 	f := &Fs{
-		name:  name,
+		name:         name,
-		root:  root,
+		root:         root,
-		opt:   *opt,
+		opt:          *opt,
-		pacer: newPacer(opt),
+		pacer:        newPacer(opt),
-		m:     m,
+		m:            m,
+		grouping:     listRGrouping,
+		listRmu:      new(sync.Mutex),
+		listRempties: make(map[string]struct{}),
 	}
 	f.isTeamDrive = opt.TeamDriveID != ""
 	f.fileFields = f.getFileFields()
@@ -1109,14 +1116,15 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 		}
 	}
 
-	// set root folder for a team drive or query the user root folder
+	// Set the root folder ID
 	if opt.RootFolderID != "" {
-		// override root folder if set or cached in the config
+		// use root_folder ID if set
 		f.rootFolderID = opt.RootFolderID
 	} else if f.isTeamDrive {
+		// otherwise use team_drive if set
 		f.rootFolderID = f.opt.TeamDriveID
 	} else {
-		// Look up the root ID and cache it in the config
+		// otherwise look up the actual root ID
 		rootID, err := f.getRootID()
 		if err != nil {
 			if gerr, ok := errors.Cause(err).(*googleapi.Error); ok && gerr.Code == 404 {
@@ -1128,7 +1136,7 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 			}
 		}
 		f.rootFolderID = rootID
-		m.Set("root_folder_id", rootID)
+		fs.Debugf(f, "root_folder_id = %q - save this in the config to speed up startup", rootID)
 	}
 
 	f.dirCache = dircache.New(root, f.rootFolderID, f)
@@ -1330,6 +1338,10 @@ func (f *Fs) newObjectWithExportInfo(
 		// and not from a listing. This is unlikely.
 		fs.Debugf(remote, "Ignoring shortcut as skip shortcuts is set")
 		return nil, fs.ErrorObjectNotFound
+	case info.MimeType == shortcutMimeTypeDangling:
+		// Pretend a dangling shortcut is a regular object
+		// It will error if used, but appear in listings so it can be deleted
+		return f.newRegularObject(remote, info), nil
 	case info.Md5Checksum != "" || info.Size > 0:
 		// If item has MD5 sum or a length it is a file stored on drive
 		return f.newRegularObject(remote, info), nil
@@ -1402,6 +1414,7 @@ func (f *Fs) CreateDir(ctx context.Context, pathID, leaf string) (newID string,
 	leaf = f.opt.Enc.FromStandardName(leaf)
 	// fmt.Println("Making", path)
 	// Define the metadata for the directory we are going to create.
+	pathID = actualID(pathID)
 	createInfo := &drive.File{
 		Name:        leaf,
 		Description: leaf,
@@ -1634,15 +1647,17 @@ func (s listRSlices) Less(i, j int) bool {
 // In each cycle it will read up to grouping entries from the in channel without blocking.
 // If an error occurs it will be send to the out channel and then return. Once the in channel is closed,
 // nil is send to the out channel and the function returns.
-func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan listREntry, out chan<- error, cb func(fs.DirEntry) error, grouping int) {
+func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in chan listREntry, out chan<- error, cb func(fs.DirEntry) error) {
 	var dirs []string
 	var paths []string
+	var grouping int32
 
 	for dir := range in {
 		dirs = append(dirs[:0], dir.id)
 		paths = append(paths[:0], dir.path)
+		grouping = atomic.LoadInt32(&f.grouping)
 	waitloop:
-		for i := 1; i < grouping; i++ {
+		for i := int32(1); i < grouping; i++ {
 			select {
 			case d, ok := <-in:
 				if !ok {
@@ -1655,6 +1670,7 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 		}
 		listRSlices{dirs, paths}.Sort()
 		var iErr error
+		foundItems := false
 		_, err := f.list(ctx, dirs, "", false, false, false, func(item *drive.File) bool {
 			// shared with me items have no parents when at the root
 			if f.opt.SharedWithMe && len(item.Parents) == 0 && len(paths) == 1 && paths[0] == "" {
@@ -1662,6 +1678,7 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 			}
 			for _, parent := range item.Parents {
 				var i int
+				foundItems = true
 				earlyExit := false
 				// If only one item in paths then no need to search for the ID
 				// assuming google drive is doing its job properly.
@@ -1702,6 +1719,53 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 			}
 			return false
 		})
+		// Found no items in more than one directory. Retry these as
+		// individual directories This is to work around a bug in google
+		// drive where (A in parents) or (B in parents) returns nothing
+		// sometimes. See #3114, #4289 and
+		// https://issuetracker.google.com/issues/149522397
+		if len(dirs) > 1 && !foundItems {
+			if atomic.SwapInt32(&f.grouping, 1) != 1 {
+				fs.Debugf(f, "Disabling ListR to work around bug in drive as multi listing (%d) returned no entries", len(dirs))
+			}
+			var recycled = make([]listREntry, len(dirs))
+			f.listRmu.Lock()
+			for i := range dirs {
+				recycled[i] = listREntry{id: dirs[i], path: paths[i]}
+				// Make a note of these dirs - if they all turn
+				// out to be empty then we can re-enable grouping
+				f.listRempties[dirs[i]] = struct{}{}
+			}
+			f.listRmu.Unlock()
+			// recycle these in the background so we don't deadlock
+			// the listR runners if they all get here
+			wg.Add(len(recycled))
+			go func() {
+				for _, entry := range recycled {
+					in <- entry
+				}
+				fs.Debugf(f, "Recycled %d entries", len(recycled))
+			}()
+		}
+		// If using a grouping of 1 and dir was empty then check to see if it
+		// is part of the group that caused grouping to be disabled.
+		if grouping == 1 && len(dirs) == 1 && !foundItems {
+			f.listRmu.Lock()
+			if _, found := f.listRempties[dirs[0]]; found {
+				// Remove the ID
+				delete(f.listRempties, dirs[0])
+				// If no empties left => all the directories that
+				// triggered the grouping being set to 1 were actually
+				// empty so must have made a mistake
+				if len(f.listRempties) == 0 {
+					if atomic.SwapInt32(&f.grouping, listRGrouping) != listRGrouping {
+						fs.Debugf(f, "Re-enabling ListR as previous detection was in error")
+					}
+				}
+			}
+			f.listRmu.Unlock()
+		}
+
 		for range dirs {
 			wg.Done()
 		}
@@ -1736,11 +1800,6 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 // Don't implement this unless you have a more efficient way
 // of listing recursively that doing a directory traversal.
 func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (err error) {
-	const (
-		grouping    = 50
-		inputBuffer = 1000
-	)
-
 	err = f.dirCache.FindRoot(ctx, false)
 	if err != nil {
 		return err
@@ -1753,7 +1812,7 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 
 	mu := sync.Mutex{} // protects in and overflow
 	wg := sync.WaitGroup{}
-	in := make(chan listREntry, inputBuffer)
+	in := make(chan listREntry, listRInputBuffer)
 	out := make(chan error, fs.Config.Checkers)
 	list := walk.NewListRHelper(callback)
 	overflow := []listREntry{}
@@ -1766,6 +1825,9 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 			job := listREntry{actualID(d.ID()), d.Remote()}
 			select {
 			case in <- job:
+				// Adding the wg after we've entered the item is
+				// safe here because we know when the callback
+				// is called we are holding a waitgroup.
 				wg.Add(1)
 			default:
 				overflow = append(overflow, job)
@@ -1779,7 +1841,7 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 	in <- listREntry{directoryID, dir}
 
 	for i := 0; i < fs.Config.Checkers; i++ {
-		go f.listRRunner(ctx, &wg, in, out, cb, grouping)
+		go f.listRRunner(ctx, &wg, in, out, cb)
 	}
 	go func() {
 		// wait until the all directories are processed
@@ -1789,8 +1851,8 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 			mu.Lock()
 			l := len(overflow)
 			// only fill half of the channel to prevent entries being put into overflow again
-			if l > inputBuffer/2 {
+			if l > listRInputBuffer/2 {
-				l = inputBuffer / 2
+				l = listRInputBuffer / 2
 			}
 			wg.Add(l)
 			for _, d := range overflow[:l] {
@@ -1912,11 +1974,18 @@ func (f *Fs) resolveShortcut(item *drive.File) (newItem *drive.File, err error)
 	}
 	newItem, err = f.getFile(item.ShortcutDetails.TargetId, f.fileFields)
 	if err != nil {
+		if gerr, ok := errors.Cause(err).(*googleapi.Error); ok && gerr.Code == 404 {
+			// 404 means dangling shortcut, so just return the shortcut with the mime type mangled
+			fs.Logf(nil, "Dangling shortcut %q detected", item.Name)
+			item.MimeType = shortcutMimeTypeDangling
+			return item, nil
+		}
 		return nil, errors.Wrap(err, "failed to resolve shortcut")
 	}
-	// make sure we use the Name and Parents from the original item
+	// make sure we use the Name, Parents and Trashed from the original item
 	newItem.Name = item.Name
 	newItem.Parents = item.Parents
+	newItem.Trashed = item.Trashed
 	// the new ID is a composite ID
 	newItem.Id = joinID(newItem.Id, item.Id)
 	return newItem, nil
@@ -3219,6 +3288,9 @@ func (o *baseObject) open(ctx context.Context, url string, options ...fs.OpenOpt
 
 // Open an object for read
 func (o *Object) Open(ctx context.Context, options ...fs.OpenOption) (in io.ReadCloser, err error) {
+	if o.mimeType == shortcutMimeTypeDangling {
+		return nil, errors.New("can't read dangling shortcut")
+	}
 	if o.v2Download {
 		var v2File *drive_v2.File
 		err = o.fs.pacer.Call(func() (bool, error) {

backend/onedrive/onedrive.go

@@ -1121,9 +1121,10 @@ func (f *Fs) Move(ctx context.Context, src fs.Object, remote string) (fs.Object,
 	id, dstDriveID, _ := parseNormalizedID(directoryID)
 	_, srcObjDriveID, _ := parseNormalizedID(srcObj.id)
 
-	if dstDriveID != srcObjDriveID {
+	if f.canonicalDriveID(dstDriveID) != srcObj.fs.canonicalDriveID(srcObjDriveID) {
 		// https://docs.microsoft.com/en-us/graph/api/driveitem-move?view=graph-rest-1.0
 		// "Items cannot be moved between Drives using this request."
+		fs.Debugf(f, "Can't move files between drives (%q != %q)", dstDriveID, srcObjDriveID)
 		return nil, fs.ErrorCantMove
 	}
 
@@ -1219,9 +1220,10 @@ func (f *Fs) DirMove(ctx context.Context, src fs.Fs, srcRemote, dstRemote string
 	}
 	_, srcDriveID, _ := parseNormalizedID(srcID)
 
-	if dstDriveID != srcDriveID {
+	if f.canonicalDriveID(dstDriveID) != srcFs.canonicalDriveID(srcDriveID) {
 		// https://docs.microsoft.com/en-us/graph/api/driveitem-move?view=graph-rest-1.0
 		// "Items cannot be moved between Drives using this request."
+		fs.Debugf(f, "Can't move directories between drives (%q != %q)", dstDriveID, srcDriveID)
 		return fs.ErrorCantDirMove
 	}
 
@@ -1869,6 +1871,17 @@ func parseNormalizedID(ID string) (string, string, string) {
 	return ID, "", ""
 }
 
+// Returns the canonical form of the driveID
+func (f *Fs) canonicalDriveID(driveID string) (canonicalDriveID string) {
+	if driveID == "" {
+		canonicalDriveID = f.opt.DriveID
+	} else {
+		canonicalDriveID = driveID
+	}
+	canonicalDriveID = strings.ToLower(canonicalDriveID)
+	return canonicalDriveID
+}
+
 // getRelativePathInsideBase checks if `target` is inside `base`. If so, it
 // returns a relative path for `target` based on `base` and a boolean `true`.
 // Otherwise returns "", false.

backend/pcloud/pcloud.go

@@ -42,7 +42,7 @@ const (
 	minSleep                    = 10 * time.Millisecond
 	maxSleep                    = 2 * time.Second
 	decayConstant               = 2 // bigger for slower decay, exponential
-	rootURL                     = "https://api.pcloud.com"
+	defaultHostname             = "api.pcloud.com"
 )
 
 // Globals
@@ -51,8 +51,8 @@ var (
 	oauthConfig = &oauth2.Config{
 		Scopes: nil,
 		Endpoint: oauth2.Endpoint{
-			AuthURL:  "https://my.pcloud.com/oauth2/authorize",
+			AuthURL: "https://my.pcloud.com/oauth2/authorize",
-			TokenURL: "https://api.pcloud.com/oauth2_token",
+			// TokenURL: "https://api.pcloud.com/oauth2_token", set by updateTokenURL
 		},
 		ClientID:     rcloneClientID,
 		ClientSecret: obscure.MustReveal(rcloneEncryptedClientSecret),
@@ -60,17 +60,45 @@ var (
 	}
 )
 
+// Update the TokenURL with the actual hostname
+func updateTokenURL(oauthConfig *oauth2.Config, hostname string) {
+	oauthConfig.Endpoint.TokenURL = "https://" + hostname + "/oauth2_token"
+}
+
 // Register with Fs
 func init() {
+	updateTokenURL(oauthConfig, defaultHostname)
 	fs.Register(&fs.RegInfo{
 		Name:        "pcloud",
 		Description: "Pcloud",
 		NewFs:       NewFs,
 		Config: func(name string, m configmap.Mapper) {
+			optc := new(Options)
+			err := configstruct.Set(m, optc)
+			if err != nil {
+				fs.Errorf(nil, "Failed to read config: %v", err)
+			}
+			updateTokenURL(oauthConfig, optc.Hostname)
+			checkAuth := func(oauthConfig *oauth2.Config, auth *oauthutil.AuthResult) error {
+				if auth == nil || auth.Form == nil {
+					return errors.New("form not found in response")
+				}
+				hostname := auth.Form.Get("hostname")
+				if hostname == "" {
+					hostname = defaultHostname
+				}
+				// Save the hostname in the config
+				m.Set("hostname", hostname)
+				// Update the token URL
+				updateTokenURL(oauthConfig, hostname)
+				fs.Debugf(nil, "pcloud: got hostname %q", hostname)
+				return nil
+			}
 			opt := oauthutil.Options{
+				CheckAuth:    checkAuth,
 				StateBlankOK: true, // pCloud seems to drop the state parameter now - see #4210
 			}
-			err := oauthutil.Config("pcloud", name, m, oauthConfig, &opt)
+			err = oauthutil.Config("pcloud", name, m, oauthConfig, &opt)
 			if err != nil {
 				log.Fatalf("Failed to configure token: %v", err)
 			}
@@ -96,6 +124,13 @@ func init() {
 			Help:     "Fill in for rclone to use a non root folder as its starting point.",
 			Default:  "d0",
 			Advanced: true,
+		}, {
+			Name: "hostname",
+			Help: `Hostname to connect to.
+
+This is normally set when rclone initially does the oauth connection.`,
+			Default:  defaultHostname,
+			Advanced: true,
 		}},
 	})
 }
@@ -104,6 +139,7 @@ func init() {
 type Options struct {
 	Enc          encoder.MultiEncoder `config:"encoding"`
 	RootFolderID string               `config:"root_folder_id"`
+	Hostname     string               `config:"hostname"`
 }
 
 // Fs represents a remote pcloud
@@ -253,12 +289,13 @@ func NewFs(name, root string, m configmap.Mapper) (fs.Fs, error) {
 	if err != nil {
 		return nil, errors.Wrap(err, "failed to configure Pcloud")
 	}
+	updateTokenURL(oauthConfig, opt.Hostname)
 
 	f := &Fs{
 		name:  name,
 		root:  root,
 		opt:   *opt,
-		srv:   rest.NewClient(oAuthClient).SetRoot(rootURL),
+		srv:   rest.NewClient(oAuthClient).SetRoot("https://" + opt.Hostname),
 		pacer: fs.NewPacer(pacer.NewDefault(pacer.MinSleep(minSleep), pacer.MaxSleep(maxSleep), pacer.DecayConstant(decayConstant))),
 	}
 	f.features = (&fs.Features{

backend/putio/object.go

@@ -248,7 +248,10 @@ func (o *Object) Open(ctx context.Context, options ...fs.OpenOption) (in io.Read
 		_ = resp.Body.Close()
 		return nil, fserrors.NoRetryError(err)
 	}
-	return resp.Body, err
+	if err != nil {
+		return nil, err
+	}
+	return resp.Body, nil
 }
 
 // Update the already existing object

backend/s3/s3.go

@@ -59,6 +59,7 @@ import (
 	"github.com/rclone/rclone/lib/pool"
 	"github.com/rclone/rclone/lib/readers"
 	"github.com/rclone/rclone/lib/rest"
+	"github.com/rclone/rclone/lib/structs"
 	"golang.org/x/sync/errgroup"
 )
 
@@ -1126,9 +1127,6 @@ func s3Connection(opt *Options) (*s3.S3, *session.Session, error) {
 		return nil, nil, errors.New("secret_access_key not found")
 	}
 
-	if opt.Region == "" && opt.Endpoint == "" {
-		opt.Endpoint = "https://s3.amazonaws.com/"
-	}
 	if opt.Region == "" {
 		opt.Region = "us-east-1"
 	}
@@ -2033,11 +2031,17 @@ func (o *Object) readMetaData(ctx context.Context) (err error) {
 	if err != nil {
 		if awsErr, ok := err.(awserr.RequestFailure); ok {
 			if awsErr.StatusCode() == http.StatusNotFound {
+				// NotFound indicates bucket was OK
+				// NoSuchBucket would be returned if bucket was bad
+				if awsErr.Code() == "NotFound" {
+					o.fs.cache.MarkOK(bucket)
+				}
 				return fs.ErrorObjectNotFound
 			}
 		}
 		return err
 	}
+	o.fs.cache.MarkOK(bucket)
 	var size int64
 	// Ignore missing Content-Length assuming it is 0
 	// Some versions of ceph do this due their apache proxies
@@ -2198,19 +2202,12 @@ func (o *Object) uploadMultipart(ctx context.Context, req *s3.PutObjectInput, si
 
 	memPool := f.getMemoryPool(int64(partSize))
 
+	var mReq s3.CreateMultipartUploadInput
+	structs.SetFrom(&mReq, req)
 	var cout *s3.CreateMultipartUploadOutput
 	err = f.pacer.Call(func() (bool, error) {
 		var err error
-		cout, err = f.c.CreateMultipartUploadWithContext(ctx, &s3.CreateMultipartUploadInput{
+		cout, err = f.c.CreateMultipartUploadWithContext(ctx, &mReq)
-			Bucket:               req.Bucket,
-			ACL:                  req.ACL,
-			Key:                  req.Key,
-			ContentType:          req.ContentType,
-			Metadata:             req.Metadata,
-			ServerSideEncryption: req.ServerSideEncryption,
-			SSEKMSKeyId:          req.SSEKMSKeyId,
-			StorageClass:         req.StorageClass,
-		})
 		return f.shouldRetry(err)
 	})
 	if err != nil {
@@ -2423,6 +2420,35 @@ func (o *Object) Update(ctx context.Context, in io.Reader, src fs.ObjectInfo, op
 	if o.fs.opt.StorageClass != "" {
 		req.StorageClass = &o.fs.opt.StorageClass
 	}
+	// Apply upload options
+	for _, option := range options {
+		key, value := option.Header()
+		lowerKey := strings.ToLower(key)
+		switch lowerKey {
+		case "":
+			// ignore
+		case "cache-control":
+			req.CacheControl = aws.String(value)
+		case "content-disposition":
+			req.ContentDisposition = aws.String(value)
+		case "content-encoding":
+			req.ContentEncoding = aws.String(value)
+		case "content-language":
+			req.ContentLanguage = aws.String(value)
+		case "content-type":
+			req.ContentType = aws.String(value)
+		case "x-amz-tagging":
+			req.Tagging = aws.String(value)
+		default:
+			const amzMetaPrefix = "x-amz-meta-"
+			if strings.HasPrefix(lowerKey, amzMetaPrefix) {
+				metaKey := lowerKey[len(amzMetaPrefix):]
+				req.Metadata[metaKey] = aws.String(value)
+			} else {
+				fs.Errorf(o, "Don't know how to set key %q on upload", key)
+			}
+		}
+	}
 
 	if multipart {
 		err = o.uploadMultipart(ctx, &req, size, in)
@@ -2463,18 +2489,6 @@ func (o *Object) Update(ctx context.Context, in io.Reader, src fs.ObjectInfo, op
 		httpReq.Header = headers
 		httpReq.ContentLength = size
 
-		for _, option := range options {
-			switch option.(type) {
-			case *fs.HTTPOption:
-				key, value := option.Header()
-				httpReq.Header.Add(key, value)
-			default:
-				if option.Mandatory() {
-					fs.Logf(o, "Unsupported mandatory option: %v", option)
-				}
-			}
-		}
-
 		err = o.fs.pacer.CallNoRetry(func() (bool, error) {
 			resp, err := o.fs.srv.Do(httpReq)
 			if err != nil {

backend/sftp/sftp.go

@@ -395,8 +395,8 @@ func NewFs(name, root string, m configmap.Mapper) (fs.Fs, error) {
 
 	keyFile := env.ShellExpand(opt.KeyFile)
 	//keyPem := env.ShellExpand(opt.KeyPem)
-	// Add ssh agent-auth if no password or file specified
+	// Add ssh agent-auth if no password or file or key PEM specified
-	if (opt.Pass == "" && keyFile == "" && !opt.AskPassword) || opt.KeyUseAgent {
+	if (opt.Pass == "" && keyFile == "" && !opt.AskPassword && opt.KeyPem == "") || opt.KeyUseAgent {
 		sshAgentClient, _, err := sshagent.New()
 		if err != nil {
 			return nil, errors.Wrap(err, "couldn't connect to ssh-agent")

backend/swift/swift.go

@@ -1124,6 +1124,9 @@ func (o *Object) removeSegments(except string) error {
 	// remove the segments container if empty, ignore errors
 	err = o.fs.pacer.Call(func() (bool, error) {
 		err = o.fs.c.ContainerDelete(segmentsContainer)
+		if err == swift.ContainerNotFound || err == swift.ContainerNotEmpty {
+			return false, err
+		}
 		return shouldRetry(err)
 	})
 	if err == nil {

backend/tardigrade/fs.go

@@ -269,7 +269,9 @@ func (f *Fs) connect(ctx context.Context) (project *uplink.Project, err error) {
 	fs.Debugf(f, "connecting...")
 	defer fs.Debugf(f, "connected: %+v", err)
 
-	cfg := uplink.Config{}
+	cfg := uplink.Config{
+		UserAgent: "rclone",
+	}
 
 	project, err = cfg.OpenProject(ctx, f.access)
 	if err != nil {

backend/webdav/api/types.go

@@ -226,6 +226,6 @@ func (t *Time) UnmarshalXML(d *xml.Decoder, start xml.StartElement) error {
 //  </d:response>
 // </d:multistatus>
 type Quota struct {
-	Available int64 `xml:"DAV: response>propstat>prop>quota-available-bytes"`
+	Available string `xml:"DAV: response>propstat>prop>quota-available-bytes"`
-	Used      int64 `xml:"DAV: response>propstat>prop>quota-used-bytes"`
+	Used      string `xml:"DAV: response>propstat>prop>quota-used-bytes"`
 }

backend/webdav/webdav.go

@@ -17,6 +17,7 @@ import (
 	"net/url"
 	"os/exec"
 	"path"
+	"strconv"
 	"strings"
 	"time"
 
@@ -975,10 +976,7 @@ func (f *Fs) About(ctx context.Context) (*fs.Usage, error) {
  </D:prop>
 </D:propfind>
 `))
-	var q = api.Quota{
+	var q api.Quota
-		Available: -1,
-		Used:      -1,
-	}
 	var resp *http.Response
 	var err error
 	err = f.pacer.Call(func() (bool, error) {
@@ -989,14 +987,14 @@ func (f *Fs) About(ctx context.Context) (*fs.Usage, error) {
 		return nil, errors.Wrap(err, "about call failed")
 	}
 	usage := &fs.Usage{}
-	if q.Used >= 0 {
+	if i, err := strconv.ParseInt(q.Used, 10, 64); err == nil && i >= 0 {
-		usage.Used = fs.NewUsageValue(q.Used)
+		usage.Used = fs.NewUsageValue(i)
 	}
-	if q.Available >= 0 {
+	if i, err := strconv.ParseInt(q.Available, 10, 64); err == nil && i >= 0 {
-		usage.Free = fs.NewUsageValue(q.Available)
+		usage.Free = fs.NewUsageValue(i)
 	}
-	if q.Available >= 0 && q.Used >= 0 {
+	if usage.Used != nil && usage.Free != nil {
-		usage.Total = fs.NewUsageValue(q.Available + q.Used)
+		usage.Total = fs.NewUsageValue(*usage.Used + *usage.Free)
 	}
 	return usage, nil
 }

bin/make_manual.py

@@ -6,6 +6,7 @@ conversion into man pages etc.
 
 import os
 import re
+import time
 from datetime import datetime
 
 docpath = "docs/content"
@@ -156,17 +157,19 @@ def read_commands(docpath):
         if command != "rclone.md":
             docs.append(read_command(command))
     return "\n".join(docs)
-    
+
 def main():
     check_docs(docpath)
     command_docs = read_commands(docpath).replace("\\", "\\\\") # escape \ so we can use command_docs in re.sub
+    build_date = datetime.utcfromtimestamp(
+            int(os.environ.get('SOURCE_DATE_EPOCH', time.time())))
     with open(outfile, "w") as out:
         out.write("""\
 %% rclone(1) User Manual
 %% Nick Craig-Wood
 %% %s
 
-""" % datetime.now().strftime("%b %d, %Y"))
+""" % build_date.strftime("%b %d, %Y"))
         for doc in docs:
             contents = read_doc(doc)
             # Substitute the commands into doc.md

cmd/cmd.go

@@ -486,6 +486,9 @@ func AddBackendFlags() {
 					help = help[:nl]
 				}
 				help = strings.TrimSpace(help)
+				if opt.IsPassword {
+					help += " (obscured)"
+				}
 				flag := pflag.CommandLine.VarPF(opt, name, opt.ShortOpt, help)
 				if _, isBool := opt.Default.(bool); isBool {
 					flag.NoOptDefVal = "true"

cmd/cmount/mount_test.go

@@ -11,9 +11,11 @@ package cmount
 import (
 	"testing"
 
+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/vfs/vfstest"
 )
 
 func TestMount(t *testing.T) {
+	testy.SkipUnreliable(t)
 	vfstest.RunTests(t, false, mount)
 }

cmd/gendocs/gendocs.go

@@ -33,7 +33,6 @@ type frontmatter struct {
 }
 
 var frontmatterTemplate = template.Must(template.New("frontmatter").Parse(`---
-date: {{ .Date }}
 title: "{{ .Title }}"
 description: "{{ .Description }}"
 slug: {{ .Slug }}
@@ -70,8 +69,7 @@ rclone.org website.`,
 		if err != nil {
 			return err
 		}
-		flagsHelp := strings.Replace(buf.String(), "YYYY-MM-DD", now, -1)
+		err = ioutil.WriteFile(filepath.Join(root, "flags.md"), buf.Bytes(), 0777)
-		err = ioutil.WriteFile(filepath.Join(root, "flags.md"), []byte(flagsHelp), 0777)
 		if err != nil {
 			return err
 		}

cmd/help.go

@@ -245,7 +245,6 @@ Use "rclone help backends" for a list of supported services.
 var docFlagsTemplate = `---
 title: "Global Flags"
 description: "Rclone Global Flags"
-date: "YYYY-MM-DD"
 ---
 
 # Global Flags
@@ -325,6 +324,9 @@ func showBackend(name string) {
 			}
 			fmt.Printf("#### --%s%s\n\n", opt.FlagName(backend.Prefix), shortOpt)
 			fmt.Printf("%s\n\n", opt.Help)
+			if opt.IsPassword {
+				fmt.Printf("**NB** Input to this must be obscured - see [rclone obscure](/commands/rclone_obscure/).\n\n")
+			}
 			fmt.Printf("- Config:      %s\n", opt.Name)
 			fmt.Printf("- Env Var:     %s\n", opt.EnvVarName(backend.Prefix))
 			fmt.Printf("- Type:        %s\n", opt.Type())

cmd/mount2/mount_test.go

@@ -5,9 +5,11 @@ package mount2
 import (
 	"testing"
 
+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/vfs/vfstest"
 )
 
 func TestMount(t *testing.T) {
+	testy.SkipUnreliable(t)
 	vfstest.RunTests(t, false, mount)
 }

cmd/mountlib/rc_test.go

@@ -78,7 +78,9 @@ func TestRc(t *testing.T) {
 
 		// mount
 		_, err = mount.Fn(ctx, in)
-		require.NoError(t, err)
+		if err != nil {
+			t.Skipf("Mount failed - skipping test: %v", err)
+		}
 
 		// check file.txt is there now
 		fi, err := os.Stat(filePath)

cmd/obscure/obscure.go

@@ -14,7 +14,21 @@ func init() {
 
 var commandDefinition = &cobra.Command{
 	Use:   "obscure password",
-	Short: `Obscure password for use in the rclone.conf`,
+	Short: `Obscure password for use in the rclone config file`,
+	Long: `In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](/commands/rclone_config/) for more
+info.`,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(1, 1, command, args)
 		cmd.Run(false, false, command, func() error {

cmd/serve/dlna/cds.go

@@ -77,10 +77,12 @@ func (cds *contentDirectoryService) cdsObjectToUpnpavObject(cdsObject object, fi
 	}
 
 	if fileInfo.IsDir() {
+		defaultChildCount := 1
 		obj.Class = "object.container.storageFolder"
 		obj.Title = fileInfo.Name()
 		return upnpav.Container{
-			Object: obj,
+			Object:     obj,
+			ChildCount: &defaultChildCount,
 		}, nil
 	}
 

cmd/serve/restic/restic.go

@@ -17,6 +17,7 @@ import (
 	"github.com/rclone/rclone/cmd/serve/httplib/serve"
 	"github.com/rclone/rclone/fs"
 	"github.com/rclone/rclone/fs/accounting"
+	"github.com/rclone/rclone/fs/config/flags"
 	"github.com/rclone/rclone/fs/fserrors"
 	"github.com/rclone/rclone/fs/operations"
 	"github.com/rclone/rclone/fs/walk"
@@ -33,9 +34,10 @@ var (
 
 func init() {
 	httpflags.AddFlags(Command.Flags())
-	Command.Flags().BoolVar(&stdio, "stdio", false, "run an HTTP2 server on stdin/stdout")
+	flagSet := Command.Flags()
-	Command.Flags().BoolVar(&appendOnly, "append-only", false, "disallow deletion of repository data")
+	flags.BoolVarP(flagSet, &stdio, "stdio", "", false, "run an HTTP2 server on stdin/stdout")
-	Command.Flags().BoolVar(&privateRepos, "private-repos", false, "users can only access their private repo")
+	flags.BoolVarP(flagSet, &appendOnly, "append-only", "", false, "disallow deletion of repository data")
+	flags.BoolVarP(flagSet, &privateRepos, "private-repos", "", false, "users can only access their private repo")
 }
 
 // Command definition for cobra

cmd/serve/webdav/webdav.go

@@ -15,6 +15,7 @@ import (
 	"github.com/rclone/rclone/cmd/serve/proxy"
 	"github.com/rclone/rclone/cmd/serve/proxy/proxyflags"
 	"github.com/rclone/rclone/fs"
+	"github.com/rclone/rclone/fs/config/flags"
 	"github.com/rclone/rclone/fs/hash"
 	"github.com/rclone/rclone/lib/errors"
 	"github.com/rclone/rclone/vfs"
@@ -30,11 +31,12 @@ var (
 )
 
 func init() {
-	httpflags.AddFlags(Command.Flags())
+	flagSet := Command.Flags()
-	vfsflags.AddFlags(Command.Flags())
+	httpflags.AddFlags(flagSet)
-	proxyflags.AddFlags(Command.Flags())
+	vfsflags.AddFlags(flagSet)
-	Command.Flags().StringVar(&hashName, "etag-hash", "", "Which hash to use for the ETag, or auto or blank for off")
+	proxyflags.AddFlags(flagSet)
-	Command.Flags().BoolVar(&disableGETDir, "disable-dir-list", false, "Disable HTML directory list on GET request for a directory")
+	flags.StringVarP(flagSet, &hashName, "etag-hash", "", "", "Which hash to use for the ETag, or auto or blank for off")
+	flags.BoolVarP(flagSet, &disableGETDir, "disable-dir-list", "", false, "Disable HTML directory list on GET request for a directory")
 }
 
 // Command definition for cobra

docs/config.json

@@ -16,6 +16,7 @@
     "~$",
     "^\\."
   ],
+  "enableGitInfo": true,
   "markup": {
     "goldmark": {
       "extensions": {

docs/content/_index.md

@@ -2,7 +2,6 @@
 title: "Rclone"
 description: "Rclone syncs your files to cloud storage: Google Drive, S3, Swift, Dropbox, Google Cloud Storage, Azure, Box and many more."
 type: page
-date: "2020-05-16"
 ---
 
 # Rclone syncs your files to cloud storage
@@ -10,9 +9,9 @@ date: "2020-05-16"
 {{< img width="50%" src="/img/logo_on_light__horizontal_color.svg" alt="rclone logo" style="float:right; padding: 5px;" >}}
 
 - [About rclone](#about)
-- [What can rclone do for you](#what)
+- [What can rclone do for you?](#what)
-- [What features does rclone have](#features)
+- [What features does rclone have?](#features)
-- [What providers does rclone support](#providers)
+- [What providers does rclone support?](#providers)
 - [Download](/downloads/)
 - [Install](/install/)
 {{< rem MAINPAGELINK >}}
@@ -27,20 +26,20 @@ services, as well as standard transfer protocols.
 
 Rclone has powerful cloud equivalents to the unix commands rsync, cp,
 mv, mount, ls, ncdu, tree, rm, and cat. Rclone's familiar syntax
-includes shell pipeline support, and `--dry-run` protection. It can be
+includes shell pipeline support, and `--dry-run` protection. It is
 used at the command line, in scripts or via its [API](/rc).
 
-Users have called rclone *"The Swiss army knife of cloud storage"* and
+Users call rclone *"The Swiss army knife of cloud storage"*, and
 *"Technology indistinguishable from magic"*.
 
 Rclone really looks after your data. It preserves timestamps and
-verifies your data at all times. Transfers over limited bandwidth;
+verifies checksums at all times. Transfers over limited bandwidth;
 intermittent connections, or subject to quota can be restarted, from
 the last good file transferred. You can
 [check](/commands/rclone_check/) the integrity of your files. Where
 possible, rclone employs server side transfers to minimise local
 bandwidth use and transfers from one provider to another without
-using your local disk.
+using local disk.
 
 Virtual backends wrap local and cloud file systems to apply
 [encryption](/crypt/), 
@@ -48,9 +47,9 @@ Virtual backends wrap local and cloud file systems to apply
 [chunking](/chunker/) and
 [joining](/union/).
 
-Rclone can [mount](/commands/rclone_mount/) any local, cloud or
+Rclone [mounts](/commands/rclone_mount/) any local, cloud or
 virtual filesystem as a disk on Windows,
-macOS, linux and FreeBSD, and also serve these over
+macOS, linux and FreeBSD, and also serves these over
 [SFTP](/commands/rclone_serve_sftp/),
 [HTTP](/commands/rclone_serve_http/),
 [WebDAV](/commands/rclone_serve_webdav/),
@@ -64,14 +63,14 @@ Fedora, Brew and Chocolatey repos. include rclone. For the latest
 version [downloading from rclone.org](/downloads/) is recommended.
 
 Rclone is widely used on Linux, Windows and Mac. Third party
-developers have built innovative backup, restore, GUI and business
+developers create innovative backup, restore, GUI and business
 process solutions using the rclone command line or API.
 
-Let rclone do the heavy lifting of communicating with cloud storage.
+Rclone does the heavy lifting of communicating with cloud storage.
 
-## What can rclone do for you {#what}
+## What can rclone do for you? {#what}
 
-Rclone can help you:
+Rclone helps you:
 
 - Backup (and encrypt) files to cloud storage
 - Restore (and decrypt) files from cloud storage
@@ -99,7 +98,7 @@ Rclone can help you:
 
 ## Supported providers {#providers}
 
-(There are many other providers, built on standard protocols such as
+(There are many others, built on standard protocols such as
 WebDAV or S3, that work out of the box.)
 
 {{< provider_list >}}

docs/content/alias.md

@@ -1,7 +1,6 @@
 ---
 title: "Alias"
 description: "Remote Aliases"
-date: "2018-01-30"
 ---
 
 {{< icon "fa fa-link" >}} Alias

docs/content/amazonclouddrive.md

@@ -1,7 +1,6 @@
 ---
 title: "Amazon Drive"
 description: "Rclone docs for Amazon Drive"
-date: "2017-06-10"
 ---
 
 {{< icon "fab fa-amazon" >}} Amazon Drive

docs/content/authors.md

@@ -1,7 +1,6 @@
 ---
 title: "Authors"
 description: "Rclone Authors and Contributors"
-date: "2016-11-02"
 ---
 
 Authors

docs/content/azureblob.md

@@ -1,7 +1,6 @@
 ---
 title: "Microsoft Azure Blob Storage"
 description: "Rclone docs for Microsoft Azure Blob Storage"
-date: "2017-07-30"
 ---
 
 {{< icon "fab fa-windows" >}} Microsoft Azure Blob Storage

docs/content/b2.md

@@ -1,7 +1,6 @@
 ---
 title: "B2"
 description: "Backblaze B2"
-date: "2016-10-25"
 ---
 
 {{< icon "fa fa-fire" >}} Backblaze B2

docs/content/box.md

@@ -1,7 +1,6 @@
 ---
 title: "Box"
 description: "Rclone docs for Box"
-date: "2015-10-14"
 ---
 
 {{< icon "fa fa-archive" >}} Box

docs/content/bugs.md

@@ -1,7 +1,6 @@
 ---
 title: "Bugs"
 description: "Rclone Bugs and Limitations"
-date: "2019-08-04"
 ---
 
 # Bugs and Limitations

docs/content/cache.md

@@ -1,7 +1,6 @@
 ---
 title: "Cache"
 description: "Rclone docs for cache remote"
-date: "2017-09-03"
 ---
 
 {{< icon "fa fa-archive" >}} Cache (BETA)
@@ -344,6 +343,8 @@ The username of the Plex user
 
 The password of the Plex user
 
+**NB** Input to this must be obscured - see [rclone obscure](/commands/rclone_obscure/).
+
 - Config:      plex_password
 - Env Var:     RCLONE_CACHE_PLEX_PASSWORD
 - Type:        string

docs/content/changelog.md

@@ -1,11 +1,100 @@
 ---
 title: "Documentation"
 description: "Rclone Changelog"
-date: "2020-05-27"
 ---
 
 # Changelog
 
+## v1.52.3 - 2020-08-07
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.2...v1.52.3)
+
+* Bug Fixes
+    * docs
+        * Disable smart typography (eg en-dash) in MANUAL.* and man page (Nick Craig-Wood)
+        * Update install.md to reflect minimum Go version (Evan Harris)
+        * Update install from source instructions (Nick Craig-Wood)
+        * make_manual: Support SOURCE_DATE_EPOCH (Morten Linderud)
+    * log: Fix --use-json-log going to stderr not --log-file on Windows (Nick Craig-Wood)
+    * serve dlna: Fix file list on Samsung Series 6+ TVs (Matteo Pietro Dazzi)
+    * sync: Fix deadlock with --track-renames-strategy modtime (Nick Craig-Wood)
+* Cache
+    * Fix moveto/copyto remote:file remote:file2 (Nick Craig-Wood)
+* Drive
+    * Stop using root_folder_id as a cache (Nick Craig-Wood)
+    * Make dangling shortcuts appear in listings (Nick Craig-Wood)
+    * Drop "Disabling ListR" messages down to debug (Nick Craig-Wood)
+    * Workaround and policy for Google Drive API (Dmitry Ustalov)
+* FTP
+    * Add note to docs about home vs root directory selection (Nick Craig-Wood)
+* Onedrive
+    * Fix reverting to Copy when Move would have worked (Nick Craig-Wood)
+    * Avoid comma rendered in URL in onedrive.md (Kevin)
+* Pcloud
+    * Fix oauth on European region "eapi.pcloud.com" (Nick Craig-Wood)
+* S3
+    * Fix bucket Region auto detection when Region unset in config (Nick Craig-Wood)
+
+## v1.52.2 - 2020-06-24
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.1...v1.52.2)
+
+* Bug Fixes
+    * build
+        * Fix docker release build action (Nick Craig-Wood)
+        * Fix custom timezone in Docker image (NoLooseEnds)
+    * check: Fix misleading message which printed errors instead of differences (Nick Craig-Wood)
+    * errors: Add WSAECONNREFUSED and more to the list of retriable Windows errors (Nick Craig-Wood)
+    * rcd: Fix incorrect prometheus metrics (Gary Kim)
+    * serve restic: Fix flags so they use environment variables (Nick Craig-Wood)
+    * serve webdav: Fix flags so they use environment variables (Nick Craig-Wood)
+    * sync: Fix --track-renames-strategy modtime (Nick Craig-Wood)
+* Drive
+    * Fix not being able to delete a directory with a trashed shortcut (Nick Craig-Wood)
+    * Fix creating a directory inside a shortcut (Nick Craig-Wood)
+    * Fix --drive-impersonate with cached root_folder_id (Nick Craig-Wood)
+* SFTP
+    * Fix SSH key PEM loading (Zac Rubin)
+* Swift
+    * Speed up deletes by not retrying segment container deletes (Nick Craig-Wood)
+* Tardigrade
+    * Upgrade to uplink v1.1.1 (Caleb Case)
+* WebDAV
+    * Fix free/used display for rclone about/df for certain backends (Nick Craig-Wood)
+
+## v1.52.1 - 2020-06-10
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1)
+
+* Bug Fixes
+    * lib/file: Fix SetSparse on Windows 7 which fixes downloads of files > 250MB (Nick Craig-Wood)
+    * build
+        * Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)
+        * Remove quicktest from Dockerfile (Nick Craig-Wood)
+        * Build Docker images with GitHub actions (Matteo Pietro Dazzi)
+        * Update Docker build workflows (Nick Craig-Wood)
+        * Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)
+        * Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
+    * docs
+        * Add link to source and modified time to footer of every page (Nick Craig-Wood)
+        * Remove manually set dates and use git dates instead (Nick Craig-Wood)
+        * Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)
+        * Remove leading slash in page reference in footer when present (Nick Craig-Wood)
+        * Note commands which need obscured input in the docs (Nick Craig-Wood)
+        * obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)
+* VFS
+    * Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)
+* Drive
+    * Fix missing items when listing using --fast-list / ListR (Nick Craig-Wood)
+* Putio
+    * Fix panic on Object.Open (Cenk Alti)
+* S3
+    * Fix upload of single files into buckets without create permission (Nick Craig-Wood)
+    * Fix --header-upload (Nick Craig-Wood)
+* Tardigrade
+    * Fix listing bug by upgrading to v1.0.7
+    * Set UserAgent to rclone (Caleb Case)
+
 ## v1.52.0 - 2020-05-27
 
 Special thanks to Martin Michlmayr for proof reading and correcting

docs/content/chunker.md

@@ -1,7 +1,6 @@
 ---
 title: "Chunker"
 description: "Split-chunking overlay remote"
-date: "2019-08-30"
 ---
 
 {{< icon "fa fa-cut" >}}Chunker (BETA)

docs/content/commands/rclone.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone"
 description: "Show help for rclone commands, flags and backends."
 slug: rclone
@@ -66,7 +65,7 @@ See the [global flags page](/flags/) for global options not listed here.
 * [rclone move](/commands/rclone_move/)	 - Move files from source to dest.
 * [rclone moveto](/commands/rclone_moveto/)	 - Move file or directory from source to dest.
 * [rclone ncdu](/commands/rclone_ncdu/)	 - Explore a remote with a text based user interface.
-* [rclone obscure](/commands/rclone_obscure/)	 - Obscure password for use in the rclone.conf
+* [rclone obscure](/commands/rclone_obscure/)	 - Obscure password for use in the rclone config file
 * [rclone purge](/commands/rclone_purge/)	 - Remove the path and all of its contents.
 * [rclone rc](/commands/rclone_rc/)	 - Run a command against a running rclone.
 * [rclone rcat](/commands/rclone_rcat/)	 - Copies standard input to file on remote.

docs/content/commands/rclone_about.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone about"
 description: "Get quota information from the remote."
 slug: rclone_about

docs/content/commands/rclone_authorize.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone authorize"
 description: "Remote authorization."
 slug: rclone_authorize

docs/content/commands/rclone_backend.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone backend"
 description: "Run a backend specific command."
 slug: rclone_backend

docs/content/commands/rclone_cat.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cat"
 description: "Concatenates any files and sends them to stdout."
 slug: rclone_cat

docs/content/commands/rclone_check.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone check"
 description: "Checks the files in the source and destination match."
 slug: rclone_check

docs/content/commands/rclone_cleanup.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cleanup"
 description: "Clean up the remote if possible"
 slug: rclone_cleanup

docs/content/commands/rclone_config.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config"
 description: "Enter an interactive configuration session."
 slug: rclone_config

docs/content/commands/rclone_config_create.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config create"
 description: "Create a new remote with name, type and options."
 slug: rclone_config_create

docs/content/commands/rclone_config_delete.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config delete"
 description: "Delete an existing remote `name`."
 slug: rclone_config_delete

docs/content/commands/rclone_config_disconnect.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config disconnect"
 description: "Disconnects user from remote"
 slug: rclone_config_disconnect

docs/content/commands/rclone_config_dump.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config dump"
 description: "Dump the config file as JSON."
 slug: rclone_config_dump

docs/content/commands/rclone_config_edit.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config edit"
 description: "Enter an interactive configuration session."
 slug: rclone_config_edit

docs/content/commands/rclone_config_file.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config file"
 description: "Show path of configuration file in use."
 slug: rclone_config_file

docs/content/commands/rclone_config_password.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config password"
 description: "Update password in an existing remote."
 slug: rclone_config_password

docs/content/commands/rclone_config_providers.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config providers"
 description: "List in JSON format all the providers and options."
 slug: rclone_config_providers

docs/content/commands/rclone_config_reconnect.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config reconnect"
 description: "Re-authenticates user with remote."
 slug: rclone_config_reconnect

docs/content/commands/rclone_config_show.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config show"
 description: "Print (decrypted) config file, or the config for a single remote."
 slug: rclone_config_show

docs/content/commands/rclone_config_update.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config update"
 description: "Update options in an existing remote."
 slug: rclone_config_update

docs/content/commands/rclone_config_userinfo.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config userinfo"
 description: "Prints info about logged in user of remote."
 slug: rclone_config_userinfo

docs/content/commands/rclone_copy.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copy"
 description: "Copy files from source to dest, skipping already copied"
 slug: rclone_copy

docs/content/commands/rclone_copyto.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copyto"
 description: "Copy files from source to dest, skipping already copied"
 slug: rclone_copyto

docs/content/commands/rclone_copyurl.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copyurl"
 description: "Copy url content to dest."
 slug: rclone_copyurl

docs/content/commands/rclone_cryptcheck.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cryptcheck"
 description: "Cryptcheck checks the integrity of a crypted remote."
 slug: rclone_cryptcheck

docs/content/commands/rclone_cryptdecode.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cryptdecode"
 description: "Cryptdecode returns unencrypted file names."
 slug: rclone_cryptdecode

docs/content/commands/rclone_dedupe.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone dedupe"
 description: "Interactively find duplicate files and delete/rename them."
 slug: rclone_dedupe

docs/content/commands/rclone_delete.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone delete"
 description: "Remove the contents of path."
 slug: rclone_delete

docs/content/commands/rclone_deletefile.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone deletefile"
 description: "Remove a single file from remote."
 slug: rclone_deletefile

docs/content/commands/rclone_genautocomplete.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete"
 description: "Output completion script for a given shell."
 slug: rclone_genautocomplete

docs/content/commands/rclone_genautocomplete_bash.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete bash"
 description: "Output bash completion script for rclone."
 slug: rclone_genautocomplete_bash

docs/content/commands/rclone_genautocomplete_fish.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete fish"
 description: "Output fish completion script for rclone."
 slug: rclone_genautocomplete_fish

docs/content/commands/rclone_genautocomplete_zsh.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete zsh"
 description: "Output zsh completion script for rclone."
 slug: rclone_genautocomplete_zsh

docs/content/commands/rclone_gendocs.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone gendocs"
 description: "Output markdown docs for rclone to the directory supplied."
 slug: rclone_gendocs

docs/content/commands/rclone_hashsum.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone hashsum"
 description: "Produces a hashsum file for all the objects in the path."
 slug: rclone_hashsum

docs/content/commands/rclone_link.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone link"
 description: "Generate public link to file/folder."
 slug: rclone_link

docs/content/commands/rclone_listremotes.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone listremotes"
 description: "List all the remotes in the config file."
 slug: rclone_listremotes

docs/content/commands/rclone_ls.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone ls"
 description: "List the objects in the path with size and path."
 slug: rclone_ls

docs/content/commands/rclone_lsd.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsd"
 description: "List all directories/containers/buckets in the path."
 slug: rclone_lsd

docs/content/commands/rclone_lsf.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsf"
 description: "List directories and objects in remote:path formatted for parsing"
 slug: rclone_lsf

docs/content/commands/rclone_lsjson.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsjson"
 description: "List directories and objects in the path in JSON format."
 slug: rclone_lsjson

docs/content/commands/rclone_lsl.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsl"
 description: "List the objects in path with modification time, size and path."
 slug: rclone_lsl

docs/content/commands/rclone_md5sum.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone md5sum"
 description: "Produces an md5sum file for all the objects in the path."
 slug: rclone_md5sum

docs/content/commands/rclone_mkdir.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone mkdir"
 description: "Make the path if it doesn't already exist."
 slug: rclone_mkdir

docs/content/commands/rclone_mount.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone mount"
 description: "Mount the remote as file system on a mountpoint."
 slug: rclone_mount

docs/content/commands/rclone_move.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone move"
 description: "Move files from source to dest."
 slug: rclone_move

docs/content/commands/rclone_moveto.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone moveto"
 description: "Move file or directory from source to dest."
 slug: rclone_moveto

docs/content/commands/rclone_ncdu.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone ncdu"
 description: "Explore a remote with a text based user interface."
 slug: rclone_ncdu

docs/content/commands/rclone_obscure.md

@@ -1,18 +1,30 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone obscure"
-description: "Obscure password for use in the rclone.conf"
+description: "Obscure password for use in the rclone config file"
 slug: rclone_obscure
 url: /commands/rclone_obscure/
 # autogenerated - DO NOT EDIT, instead edit the source code in cmd/obscure/ and as part of making a release run "make commanddocs"
 ---
 # rclone obscure
 
-Obscure password for use in the rclone.conf
+Obscure password for use in the rclone config file
 
 ## Synopsis
 
-Obscure password for use in the rclone.conf
+In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](/commands/rclone_config/) for more
+info.
 
 ```
 rclone obscure password [flags]

docs/content/commands/rclone_purge.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone purge"
 description: "Remove the path and all of its contents."
 slug: rclone_purge

docs/content/commands/rclone_rc.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rc"
 description: "Run a command against a running rclone."
 slug: rclone_rc

docs/content/commands/rclone_rcat.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rcat"
 description: "Copies standard input to file on remote."
 slug: rclone_rcat

docs/content/commands/rclone_rcd.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rcd"
 description: "Run rclone listening to remote control commands only."
 slug: rclone_rcd

docs/content/commands/rclone_rmdir.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rmdir"
 description: "Remove the path if empty."
 slug: rclone_rmdir

docs/content/commands/rclone_rmdirs.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rmdirs"
 description: "Remove empty directories under the path."
 slug: rclone_rmdirs

docs/content/commands/rclone_serve.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve"
 description: "Serve a remote over a protocol."
 slug: rclone_serve

docs/content/commands/rclone_serve_dlna.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve dlna"
 description: "Serve remote:path over DLNA"
 slug: rclone_serve_dlna

docs/content/commands/rclone_serve_ftp.md

@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve ftp"
 description: "Serve remote:path over FTP."
 slug: rclone_serve_ftp