Version v1.52.2

swift: speed up deletes by not retrying segment container deletes
Before this fix rclone would continually try to delete non empty segment containers which made deleting lots of files very slow. This fix makes rclone just try the delete once and then carry on which was the original intent of the code before the retry logic got put in.
2025-12-06 00:03:32 +00:00 · 2020-06-24 13:49:00 +01:00 · 2020-06-24 13:09:42 +01:00 · 2020-06-24 13:09:03 +01:00 · 2020-06-24 13:06:58 +01:00 · 2020-06-24 13:06:53 +01:00
442 changed files with 17361 additions and 95027 deletions
--- a/.github/workflows/build.yml
+++ b/.github/workflows/build.yml
@@ -227,7 +227,7 @@ jobs:
      - name: Cross-compile rclone
        run: |
          docker pull billziss/xgo-cgofuse
-          go get -v github.com/karalabe/xgo
+          GO111MODULE=off go get -v github.com/karalabe/xgo # don't add to go.mod
          xgo \
              -image=billziss/xgo-cgofuse \
              -targets=darwin/386,darwin/amd64,linux/386,linux/amd64,windows/386,windows/amd64 \
--- a/.github/workflows/build_publish_docker_image.yml
+++ b/.github/workflows/build_publish_docker_image.yml
@@ -0,0 +1,25 @@
+name: Docker beta build
+
+on:
+    push:
+      branches:
+        - master
+
+jobs:
+    build:
+        runs-on: ubuntu-latest
+        name: Build image job
+        steps:
+            - name: Checkout master
+              uses: actions/checkout@v2
+              with:
+                fetch-depth: 0
+            - name: Build and publish image
+              uses: ilteoood/docker_buildx@439099796bfc03dd9cedeb72a0c7cb92be5cc92c
+              with:
+                tag: beta
+                imageName: rclone/rclone
+                platform: linux/amd64,linux/386,linux/arm64,linux/arm/v7
+                publish: true
+                dockerHubUser: ${{ secrets.DOCKER_HUB_USER }}
+                dockerHubPassword: ${{ secrets.DOCKER_HUB_PASSWORD }}
--- a/.github/workflows/build_publish_release_docker_image.yml
+++ b/.github/workflows/build_publish_release_docker_image.yml
@@ -0,0 +1,33 @@
+name: Docker release build
+
+on:
+  release:
+    types: [published]
+
+jobs:
+    build:
+        runs-on: ubuntu-latest
+        name: Build image job
+        steps:
+            - name: Checkout master
+              uses: actions/checkout@v2
+              with:
+                fetch-depth: 0
+            - name: Get actual patch version
+              id: actual_patch_version
+              run: echo ::set-output name=ACTUAL_PATCH_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g')
+            - name: Get actual minor version
+              id: actual_minor_version
+              run: echo ::set-output name=ACTUAL_MINOR_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g' | cut -d "." -f 1,2)
+            - name: Get actual major version
+              id: actual_major_version
+              run: echo ::set-output name=ACTUAL_MAJOR_VERSION::$(echo $GITHUB_REF | cut -d / -f 3 | sed 's/v//g' | cut -d "." -f 1)
+            - name: Build and publish image
+              uses: ilteoood/docker_buildx@439099796bfc03dd9cedeb72a0c7cb92be5cc92c
+              with:
+                tag: latest,${{ steps.actual_patch_version.outputs.ACTUAL_PATCH_VERSION }},${{ steps.actual_minor_version.outputs.ACTUAL_MINOR_VERSION }},${{ steps.actual_major_version.outputs.ACTUAL_MAJOR_VERSION }}
+                imageName: rclone/rclone
+                platform: linux/amd64,linux/386,linux/arm64,linux/arm/v7
+                publish: true
+                dockerHubUser: ${{ secrets.DOCKER_HUB_USER }}
+                dockerHubPassword: ${{ secrets.DOCKER_HUB_PASSWORD }}
--- a/4
+++ b/4
@@ -3,7 +3,6 @@ FROM golang AS builder
 COPY . /go/src/github.com/rclone/rclone/
 WORKDIR /go/src/github.com/rclone/rclone/

-RUN make quicktest
 RUN \
  CGO_ENABLED=0 \
  make
@@ -12,7 +11,8 @@ RUN ./rclone version
 # Begin final image
 FROM alpine:latest

-RUN apk --no-cache add ca-certificates fuse
+RUN apk --no-cache add ca-certificates fuse tzdata && \
+  echo "user_allow_other" >> /etc/fuse.conf

 COPY --from=builder /go/src/github.com/rclone/rclone/rclone /usr/local/bin/

--- a/MANUAL.html
+++ b/MANUAL.html
@@ -5,7 +5,6 @@
  <meta name="generator" content="pandoc" />
  <meta name="viewport" content="width=device-width, initial-scale=1.0, user-scalable=yes" />
  <meta name="author" content="Nick Craig-Wood" />
-  <meta name="dcterms.date" content="2020-05-27" />
  <title>rclone(1) User Manual</title>
  <style type="text/css">
      code{white-space: pre-wrap;}
@@ -18,31 +17,31 @@
 <header id="title-block-header">
 <h1 class="title">rclone(1) User Manual</h1>
 <p class="author">Nick Craig-Wood</p>
-<p class="date">May 27, 2020</p>
+<p class="date">Jun 24, 2020</p>
 </header>
 <h1 id="rclone-syncs-your-files-to-cloud-storage">Rclone syncs your files to cloud storage</h1>
 <p><img width="50%" src="https://rclone.org/img/logo_on_light__horizontal_color.svg" alt="rclone logo" style="float:right; padding: 5px;" ></p>
 <ul>
 <li><a href="#about">About rclone</a></li>
-<li><a href="#what">What can rclone do for you</a></li>
-<li><a href="#features">What features does rclone have</a></li>
-<li><a href="#providers">What providers does rclone support</a></li>
+<li><a href="#what">What can rclone do for you?</a></li>
+<li><a href="#features">What features does rclone have?</a></li>
+<li><a href="#providers">What providers does rclone support?</a></li>
 <li><a href="https://rclone.org/downloads/">Download</a></li>
 <li><a href="https://rclone.org/install/">Install</a></li>
 <li><a href="https://rclone.org/donate/">Donate.</a></li>
 </ul>
 <h2 id="about">About rclone</h2>
 <p>Rclone is a command line program to manage files on cloud storage. It is a feature rich alternative to cloud vendors’ web storage interfaces. <a href="#providers">Over 40 cloud storage products</a> support rclone including S3 object stores, business &amp; consumer file storage services, as well as standard transfer protocols.</p>
-<p>Rclone has powerful cloud equivalents to the unix commands rsync, cp, mv, mount, ls, ncdu, tree, rm, and cat. Rclone’s familiar syntax includes shell pipeline support, and <code>--dry-run</code> protection. It can be used at the command line, in scripts or via its <a href="/rc">API</a>.</p>
-<p>Users have called rclone <em>“The Swiss army knife of cloud storage”</em> and <em>“Technology indistinguishable from magic”</em>.</p>
-<p>Rclone really looks after your data. It preserves timestamps and verifies your data at all times. Transfers over limited bandwidth; intermittent connections, or subject to quota can be restarted, from the last good file transferred. You can <a href="https://rclone.org/commands/rclone_check/">check</a> the integrity of your files. Where possible, rclone employs server side transfers to minimise local bandwidth use and transfers from one provider to another without using your local disk.</p>
+<p>Rclone has powerful cloud equivalents to the unix commands rsync, cp, mv, mount, ls, ncdu, tree, rm, and cat. Rclone’s familiar syntax includes shell pipeline support, and <code>--dry-run</code> protection. It is used at the command line, in scripts or via its <a href="/rc">API</a>.</p>
+<p>Users call rclone <em>“The Swiss army knife of cloud storage”</em>, and <em>“Technology indistinguishable from magic”</em>.</p>
+<p>Rclone really looks after your data. It preserves timestamps and verifies checksums at all times. Transfers over limited bandwidth; intermittent connections, or subject to quota can be restarted, from the last good file transferred. You can <a href="https://rclone.org/commands/rclone_check/">check</a> the integrity of your files. Where possible, rclone employs server side transfers to minimise local bandwidth use and transfers from one provider to another without using local disk.</p>
 <p>Virtual backends wrap local and cloud file systems to apply <a href="https://rclone.org/crypt/">encryption</a>, <a href="https://rclone.org/cache/">caching</a>, <a href="https://rclone.org/chunker/">chunking</a> and <a href="https://rclone.org/union/">joining</a>.</p>
-<p>Rclone can <a href="https://rclone.org/commands/rclone_mount/">mount</a> any local, cloud or virtual filesystem as a disk on Windows, macOS, linux and FreeBSD, and also serve these over <a href="https://rclone.org/commands/rclone_serve_sftp/">SFTP</a>, <a href="https://rclone.org/commands/rclone_serve_http/">HTTP</a>, <a href="https://rclone.org/commands/rclone_serve_webdav/">WebDAV</a>, <a href="https://rclone.org/commands/rclone_serve_ftp/">FTP</a> and <a href="https://rclone.org/commands/rclone_serve_dlna/">DLNA</a>.</p>
+<p>Rclone <a href="https://rclone.org/commands/rclone_mount/">mounts</a> any local, cloud or virtual filesystem as a disk on Windows, macOS, linux and FreeBSD, and also serves these over <a href="https://rclone.org/commands/rclone_serve_sftp/">SFTP</a>, <a href="https://rclone.org/commands/rclone_serve_http/">HTTP</a>, <a href="https://rclone.org/commands/rclone_serve_webdav/">WebDAV</a>, <a href="https://rclone.org/commands/rclone_serve_ftp/">FTP</a> and <a href="https://rclone.org/commands/rclone_serve_dlna/">DLNA</a>.</p>
 <p>Rclone is mature, open source software originally inspired by rsync and written in <a href="https://golang.org">Go</a>. The friendly support community are familiar with varied use cases. Official Ubuntu, Debian, Fedora, Brew and Chocolatey repos. include rclone. For the latest version <a href="https://rclone.org/downloads/">downloading from rclone.org</a> is recommended.</p>
-<p>Rclone is widely used on Linux, Windows and Mac. Third party developers have built innovative backup, restore, GUI and business process solutions using the rclone command line or API.</p>
-<p>Let rclone do the heavy lifting of communicating with cloud storage.</p>
-<h2 id="what">What can rclone do for you</h2>
-<p>Rclone can help you:</p>
+<p>Rclone is widely used on Linux, Windows and Mac. Third party developers create innovative backup, restore, GUI and business process solutions using the rclone command line or API.</p>
+<p>Rclone does the heavy lifting of communicating with cloud storage.</p>
+<h2 id="what">What can rclone do for you?</h2>
+<p>Rclone helps you:</p>
 <ul>
 <li>Backup (and encrypt) files to cloud storage</li>
 <li>Restore (and decrypt) files from cloud storage</li>
@@ -71,7 +70,7 @@
 <li>Experimental <a href="https://rclone.org/gui/">Web based GUI</a></li>
 </ul>
 <h2 id="providers">Supported providers</h2>
-<p>(There are many other providers, built on standard protocols such as WebDAV or S3, that work out of the box.)</p>
+<p>(There are many others, built on standard protocols such as WebDAV or S3, that work out of the box.)</p>
 <ul>
 <li>1Fichier</li>
 <li>Alibaba Cloud (Aliyun) Object Storage System (OSS)</li>
@@ -1564,9 +1563,11 @@ if src is directory
 <li><a href="https://rclone.org/commands/rclone/">rclone</a> - Show help for rclone commands, flags and backends.</li>
 </ul>
 <h1 id="rclone-obscure">rclone obscure</h1>
-<p>Obscure password for use in the rclone.conf</p>
+<p>Obscure password for use in the rclone config file</p>
 <h2 id="synopsis-52">Synopsis</h2>
-<p>Obscure password for use in the rclone.conf</p>
+<p>In the rclone config file, human readable passwords are obscured. Obscuring them is done by encrypting them and writing them out in base64. This is <strong>not</strong> a secure way of encrypting these passwords as rclone can decrypt them - it is to prevent “eyedropping” - namely someone seeing a password in the rclone config file by accident.</p>
+<p>Many equally important things (like access tokens) are not obscured in the config file. However it is very hard to shoulder surf a 64 character hex token.</p>
+<p>If you want to encrypt the config file then please use config file encryption - see <a href="https://rclone.org/commands/rclone_config/">rclone config</a> for more info.</p>
 <pre><code>rclone obscure password [flags]</code></pre>
 <h2 id="options-52">Options</h2>
 <pre><code>  -h, --help   help for obscure</code></pre>
@@ -5865,7 +5866,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --use-json-log                         Use json log format.
      --use-mmap                             Use mmap allocator (see docs).
      --use-server-modtime                   Use server modified time instead of object metadata
-      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default &quot;rclone/v1.52.0&quot;)
+      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default &quot;rclone/v1.52.2&quot;)
  -v, --verbose count                        Print lots more stuff (repeat for more)</code></pre>
 <h2 id="backend-flags">Backend Flags</h2>
 <p>These flags are available for every command. They control the backends and may be set in the config file.</p>
@@ -5920,7 +5921,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --cache-db-wait-time Duration                              How long to wait for the DB to be available - 0 is unlimited (default 1s)
      --cache-info-age Duration                                  How long to cache file structure information (directory listings, file size, times etc). (default 6h0m0s)
      --cache-plex-insecure string                               Skip all certificate verification when connecting to the Plex server
-      --cache-plex-password string                               The password of the Plex user
+      --cache-plex-password string                               The password of the Plex user (obscured)
      --cache-plex-url string                                    The URL of the Plex server
      --cache-plex-username string                               The username of the Plex user
      --cache-read-retries int                                   How many times to retry a read from a cache storage. (default 10)
@@ -5940,8 +5941,8 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
  -L, --copy-links                                               Follow symlinks and copy the pointed to item.
      --crypt-directory-name-encryption                          Option to either encrypt directory names or leave them intact. (default true)
      --crypt-filename-encryption string                         How to encrypt the filenames. (default &quot;standard&quot;)
-      --crypt-password string                                    Password or pass phrase for encryption.
-      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended.
+      --crypt-password string                                    Password or pass phrase for encryption. (obscured)
+      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended. (obscured)
      --crypt-remote string                                      Remote to encrypt/decrypt.
      --crypt-show-mapping                                       For all files listed show how the names encrypt.
      --drive-acknowledge-abuse                                  Set to allow files which return cannotDownloadAbusiveFile to be downloaded.
@@ -5992,7 +5993,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --ftp-encoding MultiEncoder                                This sets the encoding for the backend. (default Slash,Del,Ctl,RightSpace,Dot)
      --ftp-host string                                          FTP host to connect to
      --ftp-no-check-certificate                                 Do not verify the TLS certificate of the server
-      --ftp-pass string                                          FTP password
+      --ftp-pass string                                          FTP password (obscured)
      --ftp-port string                                          FTP port, leave blank to use default (21)
      --ftp-tls                                                  Use FTP over TLS (Implicit)
      --ftp-user string                                          FTP username, leave blank for current username, $USER
@@ -6029,7 +6030,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --koofr-encoding MultiEncoder                              This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
      --koofr-endpoint string                                    The Koofr API endpoint to use (default &quot;https://app.koofr.net&quot;)
      --koofr-mountid string                                     Mount ID of the mount to use. If omitted, the primary mount is used.
-      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)
+      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password) (obscured)
      --koofr-setmtime                                           Does the backend support setting modification time. Set this to false if you use a mount ID that points to a Dropbox or Amazon Drive backend. (default true)
      --koofr-user string                                        Your Koofr user name
  -l, --links                                                    Translate symlinks to/from regular files with a &#39;.rclonelink&#39; extension
@@ -6042,7 +6043,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --local-nounc string                                       Disable UNC (long path names) conversion on Windows
      --mailru-check-hash                                        What should copy do if file checksum is mismatched or invalid (default true)
      --mailru-encoding MultiEncoder                             This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
-      --mailru-pass string                                       Password
+      --mailru-pass string                                       Password (obscured)
      --mailru-speedup-enable                                    Skip full upload if there is another file with same data hash. (default true)
      --mailru-speedup-file-patterns string                      Comma separated list of file name patterns eligible for speedup (put by hash). (default &quot;*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf&quot;)
      --mailru-speedup-max-disk SizeSuffix                       This option allows you to disable speedup (put by hash) for large files (default 3G)
@@ -6051,7 +6052,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --mega-debug                                               Output more debug from Mega.
      --mega-encoding MultiEncoder                               This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
      --mega-hard-delete                                         Delete files permanently rather than putting them into the trash.
-      --mega-pass string                                         Password.
+      --mega-pass string                                         Password. (obscured)
      --mega-user string                                         User name
  -x, --one-file-system                                          Don&#39;t cross filesystem boundaries (unix/macOS only).
      --onedrive-chunk-size SizeSuffix                           Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10M)
@@ -6064,7 +6065,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --onedrive-server-side-across-configs                      Allow server side operations (eg copy) to work across different onedrive configs.
      --opendrive-chunk-size SizeSuffix                          Files will be uploaded in chunks this size. (default 10M)
      --opendrive-encoding MultiEncoder                          This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
-      --opendrive-password string                                Password.
+      --opendrive-password string                                Password. (obscured)
      --opendrive-username string                                Username
      --pcloud-client-id string                                  Pcloud App Client Id
      --pcloud-client-secret string                              Pcloud App Client Secret
@@ -6115,19 +6116,19 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --seafile-create-library                                   Should rclone create a library if it doesn&#39;t exist
      --seafile-encoding MultiEncoder                            This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8)
      --seafile-library string                                   Name of the library. Leave blank to access all non-encrypted libraries.
-      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
-      --seafile-pass string                                      Password
+      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line. (obscured)
+      --seafile-pass string                                      Password (obscured)
      --seafile-url string                                       URL of seafile host to connect to
      --seafile-user string                                      User name (usually email address)
      --sftp-ask-password                                        Allow asking for SFTP password when needed.
      --sftp-disable-hashcheck                                   Disable the execution of SSH commands to determine if remote file hashing is available.
      --sftp-host string                                         SSH host to connect to
      --sftp-key-file string                                     Path to PEM-encoded private key file, leave blank or set key-use-agent to use ssh-agent.
-      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file.
+      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file. (obscured)
      --sftp-key-pem string                                      Raw PEM-encoded private key, If specified, will override key_file parameter.
      --sftp-key-use-agent                                       When set forces the usage of the ssh-agent.
      --sftp-md5sum-command string                               The command used to read md5 hashes. Leave blank for autodetect.
-      --sftp-pass string                                         SSH password, leave blank to use ssh-agent.
+      --sftp-pass string                                         SSH password, leave blank to use ssh-agent. (obscured)
      --sftp-path-override string                                Override path used by SSH connection.
      --sftp-port string                                         SSH port, leave blank to use default (22)
      --sftp-set-modtime                                         Set the modified time on the remote if set. (default true)
@@ -6185,7 +6186,7 @@ Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      --union-upstreams string                                   List of space separated upstreams.
      --webdav-bearer-token string                               Bearer token instead of user/pass (eg a Macaroon)
      --webdav-bearer-token-command string                       Command to run to get a bearer token
-      --webdav-pass string                                       Password.
+      --webdav-pass string                                       Password. (obscured)
      --webdav-url string                                        URL of http host to connect to
      --webdav-user string                                       User name
      --webdav-vendor string                                     Name of the Webdav site/service/software you are using
@@ -9304,6 +9305,7 @@ chunk_total_size = 10G</code></pre>
 </ul>
 <h4 id="cache-plex-password">–cache-plex-password</h4>
 <p>The password of the Plex user</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: plex_password</li>
 <li>Env Var: RCLONE_CACHE_PLEX_PASSWORD</li>
@@ -10195,6 +10197,7 @@ $ rclone -q ls secret:
 </ul>
 <h4 id="crypt-password">–crypt-password</h4>
 <p>Password or pass phrase for encryption.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: password</li>
 <li>Env Var: RCLONE_CRYPT_PASSWORD</li>
@@ -10203,6 +10206,7 @@ $ rclone -q ls secret:
 </ul>
 <h4 id="crypt-password2">–crypt-password2</h4>
 <p>Password or pass phrase for salt. Optional but recommended. Should be different to the previous password.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: password2</li>
 <li>Env Var: RCLONE_CRYPT_PASSWORD2</li>
@@ -10621,6 +10625,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="ftp-pass">–ftp-pass</h4>
 <p>FTP password</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_FTP_PASS</li>
@@ -11379,7 +11384,7 @@ trashed=false and &#39;c&#39; in parents</code></pre>
 <li>When deleting with <code>rclone rmdir</code> or <code>rclone purge</code> the shortcut is deleted not the linked folder.</li>
 <li><strong>NB</strong> When deleting with <code>rclone remove</code> or <code>rclone mount</code> the contents of the linked folder will be deleted.</li>
 </ul>
-<p>It isn’t currently possible to create shortcuts with rclone.</p>
+<p>The <a href="https://rclone.org/commands/rclone_backend/">rclone backend</a> command can be used to create shortcuts.</p>
 <p>Shortcuts can be completely ignored with the <code>--drive-skip-shortcuts</code> flag or the corresponding <code>skip_shortcuts</code> configuration setting.</p>
 <h3 id="emptying-trash">Emptying trash</h3>
 <p>If you wish to empty your trash you can use the <code>rclone cleanup remote:</code> command which will permanently delete all your trashed files. This command does not take any path arguments.</p>
@@ -11810,6 +11815,7 @@ trashed=false and &#39;c&#39; in parents</code></pre>
 </ul>
 <h4 id="drive-impersonate">–drive-impersonate</h4>
 <p>Impersonate this user when using a service account.</p>
+<p>Note that if this is used then “root_folder_id” will be ignored.</p>
 <ul>
 <li>Config: impersonate</li>
 <li>Env Var: RCLONE_DRIVE_IMPERSONATE</li>
@@ -12776,6 +12782,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="koofr-password">–koofr-password</h4>
 <p>Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: password</li>
 <li>Env Var: RCLONE_KOOFR_PASSWORD</li>
@@ -12976,6 +12983,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="mailru-pass">–mailru-pass</h4>
 <p>Password</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_MAILRU_PASS</li>
@@ -13223,6 +13231,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="mega-pass">–mega-pass</h4>
 <p>Password.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_MEGA_PASS</li>
@@ -14022,6 +14031,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="opendrive-password">–opendrive-password</h4>
 <p>Password.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: password</li>
 <li>Env Var: RCLONE_OPENDRIVE_PASSWORD</li>
@@ -15244,6 +15254,7 @@ http://my.seafile.server/d/9ea2455f6f55478bbb0d/</code></pre>
 </ul>
 <h4 id="seafile-pass">–seafile-pass</h4>
 <p>Password</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_SEAFILE_PASS</li>
@@ -15268,6 +15279,7 @@ http://my.seafile.server/d/9ea2455f6f55478bbb0d/</code></pre>
 </ul>
 <h4 id="seafile-library-key">–seafile-library-key</h4>
 <p>Library password (for encrypted libraries only). Leave blank if you pass it through the command line.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: library_key</li>
 <li>Env Var: RCLONE_SEAFILE_LIBRARY_KEY</li>
@@ -15426,6 +15438,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="sftp-pass">–sftp-pass</h4>
 <p>SSH password, leave blank to use ssh-agent.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_SFTP_PASS</li>
@@ -15451,6 +15464,7 @@ y/e/d&gt; y</code></pre>
 <h4 id="sftp-key-file-pass">–sftp-key-file-pass</h4>
 <p>The passphrase to decrypt the PEM-encoded private key file.</p>
 <p>Only PEM encrypted key files (old OpenSSH format) are supported. Encrypted keys in the new OpenSSH format can’t be used.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: key_file_pass</li>
 <li>Env Var: RCLONE_SFTP_KEY_FILE_PASS</li>
@@ -16368,6 +16382,7 @@ y/e/d&gt; y</code></pre>
 </ul>
 <h4 id="webdav-pass">–webdav-pass</h4>
 <p>Password.</p>
+<p><strong>NB</strong> Input to this must be obscured - see <a href="https://rclone.org/commands/rclone_obscure/">rclone obscure</a>.</p>
 <ul>
 <li>Config: pass</li>
 <li>Env Var: RCLONE_WEBDAV_PASS</li>
@@ -17045,6 +17060,94 @@ $ tree /tmp/b
 <li>“error”: return an error based on option value</li>
 </ul>
 <h1 id="changelog">Changelog</h1>
+<h2 id="v1.52.2---2020-06-24">v1.52.2 - 2020-06-24</h2>
+<p><a href="https://github.com/rclone/rclone/compare/v1.52.1...v1.52.2">See commits</a></p>
+<ul>
+<li>Bug Fixes
+<ul>
+<li>build
+<ul>
+<li>Fix docker release build action (Nick Craig-Wood)</li>
+<li>Fix custom timezone in Docker image (NoLooseEnds)</li>
+</ul></li>
+<li>check: Fix misleading message which printed errors instead of differences (Nick Craig-Wood)</li>
+<li>errors: Add WSAECONNREFUSED and more to the list of retriable Windows errors (Nick Craig-Wood)</li>
+<li>rcd: Fix incorrect prometheus metrics (Gary Kim)</li>
+<li>serve restic: Fix flags so they use environment variables (Nick Craig-Wood)</li>
+<li>serve webdav: Fix flags so they use environment variables (Nick Craig-Wood)</li>
+<li>sync: Fix –track-renames-strategy modtime (Nick Craig-Wood)</li>
+</ul></li>
+<li>Drive
+<ul>
+<li>Fix not being able to delete a directory with a trashed shortcut (Nick Craig-Wood)</li>
+<li>Fix creating a directory inside a shortcut (Nick Craig-Wood)</li>
+<li>Fix –drive-impersonate with cached root_folder_id (Nick Craig-Wood)</li>
+</ul></li>
+<li>SFTP
+<ul>
+<li>Fix SSH key PEM loading (Zac Rubin)</li>
+</ul></li>
+<li>Swift
+<ul>
+<li>Speed up deletes by not retrying segment container deletes (Nick Craig-Wood)</li>
+</ul></li>
+<li>Tardigrade
+<ul>
+<li>Upgrade to uplink v1.1.1 (Caleb Case)</li>
+</ul></li>
+<li>WebDAV
+<ul>
+<li>Fix free/used display for rclone about/df for certain backends (Nick Craig-Wood)</li>
+</ul></li>
+</ul>
+<h2 id="v1.52.1---2020-06-10">v1.52.1 - 2020-06-10</h2>
+<p><a href="https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1">See commits</a></p>
+<ul>
+<li>Bug Fixes
+<ul>
+<li>lib/file: Fix SetSparse on Windows 7 which fixes downloads of files &gt; 250MB (Nick Craig-Wood)</li>
+<li>build
+<ul>
+<li>Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)</li>
+<li>Remove quicktest from Dockerfile (Nick Craig-Wood)</li>
+<li>Build Docker images with GitHub actions (Matteo Pietro Dazzi)</li>
+<li>Update Docker build workflows (Nick Craig-Wood)</li>
+<li>Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)</li>
+<li>Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)</li>
+</ul></li>
+<li>docs
+<ul>
+<li>Add link to source and modified time to footer of every page (Nick Craig-Wood)</li>
+<li>Remove manually set dates and use git dates instead (Nick Craig-Wood)</li>
+<li>Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)</li>
+<li>Remove leading slash in page reference in footer when present (Nick Craig-Wood)</li>
+<li>Note commands which need obscured input in the docs (Nick Craig-Wood)</li>
+<li>obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)</li>
+</ul></li>
+</ul></li>
+<li>VFS
+<ul>
+<li>Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)</li>
+</ul></li>
+<li>Drive
+<ul>
+<li>Fix missing items when listing using –fast-list / ListR (Nick Craig-Wood)</li>
+</ul></li>
+<li>Putio
+<ul>
+<li>Fix panic on Object.Open (Cenk Alti)</li>
+</ul></li>
+<li>S3
+<ul>
+<li>Fix upload of single files into buckets without create permission (Nick Craig-Wood)</li>
+<li>Fix –header-upload (Nick Craig-Wood)</li>
+</ul></li>
+<li>Tardigrade
+<ul>
+<li>Fix listing bug by upgrading to v1.0.7</li>
+<li>Set UserAgent to rclone (Caleb Case)</li>
+</ul></li>
+</ul>
 <h2 id="v1.52.0---2020-05-27">v1.52.0 - 2020-05-27</h2>
 <p>Special thanks to Martin Michlmayr for proof reading and correcting all the docs and Edward Barker for helping re-write the front page.</p>
 <p><a href="https://github.com/rclone/rclone/compare/v1.51.0...v1.52.0">See commits</a></p>
--- a/MANUAL.md
+++ b/MANUAL.md
@@ -1,15 +1,15 @@
 % rclone(1) User Manual
 % Nick Craig-Wood
-% May 27, 2020
+% Jun 24, 2020

 # Rclone syncs your files to cloud storage

 <img width="50%" src="https://rclone.org/img/logo_on_light__horizontal_color.svg" alt="rclone logo" style="float:right; padding: 5px;" >

 - [About rclone](#about)
- [What can rclone do for you](#what)
- [What features does rclone have](#features)
- [What providers does rclone support](#providers)
+- [What can rclone do for you?](#what)
+- [What features does rclone have?](#features)
+- [What providers does rclone support?](#providers)
 - [Download](https://rclone.org/downloads/)
 - [Install](https://rclone.org/install/)
 - [Donate.](https://rclone.org/donate/)
@@ -24,20 +24,20 @@ services, as well as standard transfer protocols.

 Rclone has powerful cloud equivalents to the unix commands rsync, cp,
 mv, mount, ls, ncdu, tree, rm, and cat. Rclone's familiar syntax
-includes shell pipeline support, and `--dry-run` protection. It can be
+includes shell pipeline support, and `--dry-run` protection. It is
 used at the command line, in scripts or via its [API](/rc).

-Users have called rclone *"The Swiss army knife of cloud storage"* and
+Users call rclone *"The Swiss army knife of cloud storage"*, and
 *"Technology indistinguishable from magic"*.

 Rclone really looks after your data. It preserves timestamps and
-verifies your data at all times. Transfers over limited bandwidth;
+verifies checksums at all times. Transfers over limited bandwidth;
 intermittent connections, or subject to quota can be restarted, from
 the last good file transferred. You can
 [check](https://rclone.org/commands/rclone_check/) the integrity of your files. Where
 possible, rclone employs server side transfers to minimise local
 bandwidth use and transfers from one provider to another without
-using your local disk.
+using local disk.

 Virtual backends wrap local and cloud file systems to apply
 [encryption](https://rclone.org/crypt/), 
@@ -45,9 +45,9 @@ Virtual backends wrap local and cloud file systems to apply
 [chunking](https://rclone.org/chunker/) and
 [joining](https://rclone.org/union/).

-Rclone can [mount](https://rclone.org/commands/rclone_mount/) any local, cloud or
+Rclone [mounts](https://rclone.org/commands/rclone_mount/) any local, cloud or
 virtual filesystem as a disk on Windows,
-macOS, linux and FreeBSD, and also serve these over
+macOS, linux and FreeBSD, and also serves these over
 [SFTP](https://rclone.org/commands/rclone_serve_sftp/),
 [HTTP](https://rclone.org/commands/rclone_serve_http/),
 [WebDAV](https://rclone.org/commands/rclone_serve_webdav/),
@@ -61,14 +61,14 @@ Fedora, Brew and Chocolatey repos. include rclone. For the latest
 version [downloading from rclone.org](https://rclone.org/downloads/) is recommended.

 Rclone is widely used on Linux, Windows and Mac. Third party
-developers have built innovative backup, restore, GUI and business
+developers create innovative backup, restore, GUI and business
 process solutions using the rclone command line or API.

-Let rclone do the heavy lifting of communicating with cloud storage.
+Rclone does the heavy lifting of communicating with cloud storage.

-## What can rclone do for you {#what}
+## What can rclone do for you? {#what}

-Rclone can help you:
+Rclone helps you:

 - Backup (and encrypt) files to cloud storage
 - Restore (and decrypt) files from cloud storage
@@ -96,7 +96,7 @@ Rclone can help you:

 ## Supported providers {#providers}

-(There are many other providers, built on standard protocols such as
+(There are many others, built on standard protocols such as
 WebDAV or S3, that work out of the box.)


@@ -3126,11 +3126,24 @@ See the [global flags page](https://rclone.org/flags/) for global options not li

 # rclone obscure

-Obscure password for use in the rclone.conf
+Obscure password for use in the rclone config file

 ## Synopsis

-Obscure password for use in the rclone.conf
+In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](https://rclone.org/commands/rclone_config/) for more
+info.

 ```
 rclone obscure password [flags]
@@ -9670,7 +9683,7 @@ These flags are available for every command.
      --use-json-log                         Use json log format.
      --use-mmap                             Use mmap allocator (see docs).
      --use-server-modtime                   Use server modified time instead of object metadata
-      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.0")
+      --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.2")
  -v, --verbose count                        Print lots more stuff (repeat for more)
 ```

@@ -9731,7 +9744,7 @@ and may be set in the config file.
      --cache-db-wait-time Duration                              How long to wait for the DB to be available - 0 is unlimited (default 1s)
      --cache-info-age Duration                                  How long to cache file structure information (directory listings, file size, times etc). (default 6h0m0s)
      --cache-plex-insecure string                               Skip all certificate verification when connecting to the Plex server
-      --cache-plex-password string                               The password of the Plex user
+      --cache-plex-password string                               The password of the Plex user (obscured)
      --cache-plex-url string                                    The URL of the Plex server
      --cache-plex-username string                               The username of the Plex user
      --cache-read-retries int                                   How many times to retry a read from a cache storage. (default 10)
@@ -9751,8 +9764,8 @@ and may be set in the config file.
  -L, --copy-links                                               Follow symlinks and copy the pointed to item.
      --crypt-directory-name-encryption                          Option to either encrypt directory names or leave them intact. (default true)
      --crypt-filename-encryption string                         How to encrypt the filenames. (default "standard")
-      --crypt-password string                                    Password or pass phrase for encryption.
-      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended.
+      --crypt-password string                                    Password or pass phrase for encryption. (obscured)
+      --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended. (obscured)
      --crypt-remote string                                      Remote to encrypt/decrypt.
      --crypt-show-mapping                                       For all files listed show how the names encrypt.
      --drive-acknowledge-abuse                                  Set to allow files which return cannotDownloadAbusiveFile to be downloaded.
@@ -9803,7 +9816,7 @@ and may be set in the config file.
      --ftp-encoding MultiEncoder                                This sets the encoding for the backend. (default Slash,Del,Ctl,RightSpace,Dot)
      --ftp-host string                                          FTP host to connect to
      --ftp-no-check-certificate                                 Do not verify the TLS certificate of the server
-      --ftp-pass string                                          FTP password
+      --ftp-pass string                                          FTP password (obscured)
      --ftp-port string                                          FTP port, leave blank to use default (21)
      --ftp-tls                                                  Use FTP over TLS (Implicit)
      --ftp-user string                                          FTP username, leave blank for current username, $USER
@@ -9840,7 +9853,7 @@ and may be set in the config file.
      --koofr-encoding MultiEncoder                              This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
      --koofr-endpoint string                                    The Koofr API endpoint to use (default "https://app.koofr.net")
      --koofr-mountid string                                     Mount ID of the mount to use. If omitted, the primary mount is used.
-      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)
+      --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password) (obscured)
      --koofr-setmtime                                           Does the backend support setting modification time. Set this to false if you use a mount ID that points to a Dropbox or Amazon Drive backend. (default true)
      --koofr-user string                                        Your Koofr user name
  -l, --links                                                    Translate symlinks to/from regular files with a '.rclonelink' extension
@@ -9853,7 +9866,7 @@ and may be set in the config file.
      --local-nounc string                                       Disable UNC (long path names) conversion on Windows
      --mailru-check-hash                                        What should copy do if file checksum is mismatched or invalid (default true)
      --mailru-encoding MultiEncoder                             This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
-      --mailru-pass string                                       Password
+      --mailru-pass string                                       Password (obscured)
      --mailru-speedup-enable                                    Skip full upload if there is another file with same data hash. (default true)
      --mailru-speedup-file-patterns string                      Comma separated list of file name patterns eligible for speedup (put by hash). (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf")
      --mailru-speedup-max-disk SizeSuffix                       This option allows you to disable speedup (put by hash) for large files (default 3G)
@@ -9862,7 +9875,7 @@ and may be set in the config file.
      --mega-debug                                               Output more debug from Mega.
      --mega-encoding MultiEncoder                               This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
      --mega-hard-delete                                         Delete files permanently rather than putting them into the trash.
-      --mega-pass string                                         Password.
+      --mega-pass string                                         Password. (obscured)
      --mega-user string                                         User name
  -x, --one-file-system                                          Don't cross filesystem boundaries (unix/macOS only).
      --onedrive-chunk-size SizeSuffix                           Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10M)
@@ -9875,7 +9888,7 @@ and may be set in the config file.
      --onedrive-server-side-across-configs                      Allow server side operations (eg copy) to work across different onedrive configs.
      --opendrive-chunk-size SizeSuffix                          Files will be uploaded in chunks this size. (default 10M)
      --opendrive-encoding MultiEncoder                          This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
-      --opendrive-password string                                Password.
+      --opendrive-password string                                Password. (obscured)
      --opendrive-username string                                Username
      --pcloud-client-id string                                  Pcloud App Client Id
      --pcloud-client-secret string                              Pcloud App Client Secret
@@ -9926,19 +9939,19 @@ and may be set in the config file.
      --seafile-create-library                                   Should rclone create a library if it doesn't exist
      --seafile-encoding MultiEncoder                            This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8)
      --seafile-library string                                   Name of the library. Leave blank to access all non-encrypted libraries.
-      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
-      --seafile-pass string                                      Password
+      --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line. (obscured)
+      --seafile-pass string                                      Password (obscured)
      --seafile-url string                                       URL of seafile host to connect to
      --seafile-user string                                      User name (usually email address)
      --sftp-ask-password                                        Allow asking for SFTP password when needed.
      --sftp-disable-hashcheck                                   Disable the execution of SSH commands to determine if remote file hashing is available.
      --sftp-host string                                         SSH host to connect to
      --sftp-key-file string                                     Path to PEM-encoded private key file, leave blank or set key-use-agent to use ssh-agent.
-      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file.
+      --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file. (obscured)
      --sftp-key-pem string                                      Raw PEM-encoded private key, If specified, will override key_file parameter.
      --sftp-key-use-agent                                       When set forces the usage of the ssh-agent.
      --sftp-md5sum-command string                               The command used to read md5 hashes. Leave blank for autodetect.
-      --sftp-pass string                                         SSH password, leave blank to use ssh-agent.
+      --sftp-pass string                                         SSH password, leave blank to use ssh-agent. (obscured)
      --sftp-path-override string                                Override path used by SSH connection.
      --sftp-port string                                         SSH port, leave blank to use default (22)
      --sftp-set-modtime                                         Set the modified time on the remote if set. (default true)
@@ -9996,7 +10009,7 @@ and may be set in the config file.
      --union-upstreams string                                   List of space separated upstreams.
      --webdav-bearer-token string                               Bearer token instead of user/pass (eg a Macaroon)
      --webdav-bearer-token-command string                       Command to run to get a bearer token
-      --webdav-pass string                                       Password.
+      --webdav-pass string                                       Password. (obscured)
      --webdav-url string                                        URL of http host to connect to
      --webdav-user string                                       User name
      --webdav-vendor string                                     Name of the Webdav site/service/software you are using
@@ -13622,6 +13635,8 @@ The username of the Plex user

 The password of the Plex user

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      plex_password
 - Env Var:     RCLONE_CACHE_PLEX_PASSWORD
 - Type:        string
@@ -14880,6 +14895,8 @@ NB If filename_encryption is "off" then this option will do nothing.

 Password or pass phrase for encryption.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_CRYPT_PASSWORD
 - Type:        string
@@ -14890,6 +14907,8 @@ Password or pass phrase for encryption.
 Password or pass phrase for salt. Optional but recommended.
 Should be different to the previous password.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password2
 - Env Var:     RCLONE_CRYPT_PASSWORD2
 - Type:        string
@@ -15480,6 +15499,8 @@ FTP port, leave blank to use default (21)

 FTP password

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_FTP_PASS
 - Type:        string
@@ -16426,7 +16447,7 @@ For shortcuts pointing to folders:
 - When deleting with `rclone rmdir` or `rclone purge` the shortcut is deleted not the linked folder.
 - **NB** When deleting with `rclone remove` or `rclone mount` the contents of the linked folder will be deleted.

-It isn't currently possible to create shortcuts with rclone.
+The [rclone backend](https://rclone.org/commands/rclone_backend/) command can be used to create shortcuts.  

 Shortcuts can be completely ignored with the `--drive-skip-shortcuts` flag
 or the corresponding `skip_shortcuts` configuration setting.
@@ -16812,6 +16833,9 @@ Size of listing chunk 100-1000. 0 to disable.

 Impersonate this user when using a service account.

+Note that if this is used then "root_folder_id" will be ignored.
+
+
 - Config:      impersonate
 - Env Var:     RCLONE_DRIVE_IMPERSONATE
 - Type:        string
@@ -18312,6 +18336,8 @@ Your Koofr user name

 Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_KOOFR_PASSWORD
 - Type:        string
@@ -18544,6 +18570,8 @@ User name (usually email)

 Password

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_MAILRU_PASS
 - Type:        string
@@ -18842,6 +18870,8 @@ User name

 Password.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_MEGA_PASS
 - Type:        string
@@ -19818,6 +19848,8 @@ Username

 Password.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      password
 - Env Var:     RCLONE_OPENDRIVE_PASSWORD
 - Type:        string
@@ -21394,6 +21426,8 @@ User name (usually email address)

 Password

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_SEAFILE_PASS
 - Type:        string
@@ -21421,6 +21455,8 @@ Name of the library. Leave blank to access all non-encrypted libraries.

 Library password (for encrypted libraries only). Leave blank if you pass it through the command line.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      library_key
 - Env Var:     RCLONE_SEAFILE_LIBRARY_KEY
 - Type:        string
@@ -21650,6 +21686,8 @@ SSH port, leave blank to use default (22)

 SSH password, leave blank to use ssh-agent.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_SFTP_PASS
 - Type:        string
@@ -21680,6 +21718,8 @@ The passphrase to decrypt the PEM-encoded private key file.
 Only PEM encrypted key files (old OpenSSH format) are supported. Encrypted keys
 in the new OpenSSH format can't be used.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      key_file_pass
 - Env Var:     RCLONE_SFTP_KEY_FILE_PASS
 - Type:        string
@@ -22778,6 +22818,8 @@ User name

 Password.

+**NB** Input to this must be obscured - see [rclone obscure](https://rclone.org/commands/rclone_obscure/).
+
 - Config:      pass
 - Env Var:     RCLONE_WEBDAV_PASS
 - Type:        string
@@ -23596,6 +23638,66 @@ Options:

 # Changelog

+## v1.52.2 - 2020-06-24
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.1...v1.52.2)
+
+* Bug Fixes
+    * build
+        * Fix docker release build action (Nick Craig-Wood)
+        * Fix custom timezone in Docker image (NoLooseEnds)
+    * check: Fix misleading message which printed errors instead of differences (Nick Craig-Wood)
+    * errors: Add WSAECONNREFUSED and more to the list of retriable Windows errors (Nick Craig-Wood)
+    * rcd: Fix incorrect prometheus metrics (Gary Kim)
+    * serve restic: Fix flags so they use environment variables (Nick Craig-Wood)
+    * serve webdav: Fix flags so they use environment variables (Nick Craig-Wood)
+    * sync: Fix --track-renames-strategy modtime (Nick Craig-Wood)
+* Drive
+    * Fix not being able to delete a directory with a trashed shortcut (Nick Craig-Wood)
+    * Fix creating a directory inside a shortcut (Nick Craig-Wood)
+    * Fix --drive-impersonate with cached root_folder_id (Nick Craig-Wood)
+* SFTP
+    * Fix SSH key PEM loading (Zac Rubin)
+* Swift
+    * Speed up deletes by not retrying segment container deletes (Nick Craig-Wood)
+* Tardigrade
+    * Upgrade to uplink v1.1.1 (Caleb Case)
+* WebDAV
+    * Fix free/used display for rclone about/df for certain backends (Nick Craig-Wood)
+
+## v1.52.1 - 2020-06-10
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1)
+
+* Bug Fixes
+    * lib/file: Fix SetSparse on Windows 7 which fixes downloads of files > 250MB (Nick Craig-Wood)
+    * build
+        * Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)
+        * Remove quicktest from Dockerfile (Nick Craig-Wood)
+        * Build Docker images with GitHub actions (Matteo Pietro Dazzi)
+        * Update Docker build workflows (Nick Craig-Wood)
+        * Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)
+        * Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
+    * docs
+        * Add link to source and modified time to footer of every page (Nick Craig-Wood)
+        * Remove manually set dates and use git dates instead (Nick Craig-Wood)
+        * Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)
+        * Remove leading slash in page reference in footer when present (Nick Craig-Wood)
+        * Note commands which need obscured input in the docs (Nick Craig-Wood)
+        * obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)
+* VFS
+    * Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)
+* Drive
+    * Fix missing items when listing using --fast-list / ListR (Nick Craig-Wood)
+* Putio
+    * Fix panic on Object.Open (Cenk Alti)
+* S3
+    * Fix upload of single files into buckets without create permission (Nick Craig-Wood)
+    * Fix --header-upload (Nick Craig-Wood)
+* Tardigrade
+    * Fix listing bug by upgrading to v1.0.7
+    * Set UserAgent to rclone (Caleb Case)
+
 ## v1.52.0 - 2020-05-27

 Special thanks to Martin Michlmayr for proof reading and correcting
--- a/MANUAL.txt
+++ b/MANUAL.txt
@@ -1,6 +1,6 @@
 rclone(1) User Manual
 Nick Craig-Wood
-May 27, 2020
+Jun 24, 2020



@@ -8,9 +8,9 @@ RCLONE SYNCS YOUR FILES TO CLOUD STORAGE


 -   About rclone
-   What can rclone do for you
-   What features does rclone have
-   What providers does rclone support
+-   What can rclone do for you?
+-   What features does rclone have?
+-   What providers does rclone support?
 -   Download
 -   Install
 -   Donate.
@@ -26,26 +26,26 @@ transfer protocols.

 Rclone has powerful cloud equivalents to the unix commands rsync, cp,
 mv, mount, ls, ncdu, tree, rm, and cat. Rclone’s familiar syntax
-includes shell pipeline support, and --dry-run protection. It can be
-used at the command line, in scripts or via its API.
+includes shell pipeline support, and --dry-run protection. It is used at
+the command line, in scripts or via its API.

-Users have called rclone _“The Swiss army knife of cloud storage”_ and
+Users call rclone _“The Swiss army knife of cloud storage”_, and
 _“Technology indistinguishable from magic”_.

 Rclone really looks after your data. It preserves timestamps and
-verifies your data at all times. Transfers over limited bandwidth;
+verifies checksums at all times. Transfers over limited bandwidth;
 intermittent connections, or subject to quota can be restarted, from the
 last good file transferred. You can check the integrity of your files.
 Where possible, rclone employs server side transfers to minimise local
 bandwidth use and transfers from one provider to another without using
-your local disk.
+local disk.

 Virtual backends wrap local and cloud file systems to apply encryption,
 caching, chunking and joining.

-Rclone can mount any local, cloud or virtual filesystem as a disk on
-Windows, macOS, linux and FreeBSD, and also serve these over SFTP, HTTP,
-WebDAV, FTP and DLNA.
+Rclone mounts any local, cloud or virtual filesystem as a disk on
+Windows, macOS, linux and FreeBSD, and also serves these over SFTP,
+HTTP, WebDAV, FTP and DLNA.

 Rclone is mature, open source software originally inspired by rsync and
 written in Go. The friendly support community are familiar with varied
@@ -54,15 +54,15 @@ include rclone. For the latest version downloading from rclone.org is
 recommended.

 Rclone is widely used on Linux, Windows and Mac. Third party developers
-have built innovative backup, restore, GUI and business process
-solutions using the rclone command line or API.
+create innovative backup, restore, GUI and business process solutions
+using the rclone command line or API.

-Let rclone do the heavy lifting of communicating with cloud storage.
+Rclone does the heavy lifting of communicating with cloud storage.


-What can rclone do for you
+What can rclone do for you?

-Rclone can help you:
+Rclone helps you:

 -   Backup (and encrypt) files to cloud storage
 -   Restore (and decrypt) files from cloud storage
@@ -94,8 +94,8 @@ Features

 Supported providers

-(There are many other providers, built on standard protocols such as
-WebDAV or S3, that work out of the box.)
+(There are many others, built on standard protocols such as WebDAV or
+S3, that work out of the box.)

 -   1Fichier
 -   Alibaba Cloud (Aliyun) Object Storage System (OSS)
@@ -3157,12 +3157,23 @@ SEE ALSO
 RCLONE OBSCURE


-Obscure password for use in the rclone.conf
+Obscure password for use in the rclone config file


 Synopsis

-Obscure password for use in the rclone.conf
+In the rclone config file, human readable passwords are obscured.
+Obscuring them is done by encrypting them and writing them out in
+base64. This is NOT a secure way of encrypting these passwords as rclone
+can decrypt them - it is to prevent “eyedropping” - namely someone
+seeing a password in the rclone config file by accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64 character
+hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see rclone config for more info.

    rclone obscure password [flags]

@@ -9741,7 +9752,7 @@ These flags are available for every command.
          --use-json-log                         Use json log format.
          --use-mmap                             Use mmap allocator (see docs).
          --use-server-modtime                   Use server modified time instead of object metadata
-          --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.0")
+          --user-agent string                    Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.52.2")
      -v, --verbose count                        Print lots more stuff (repeat for more)


@@ -9801,7 +9812,7 @@ and may be set in the config file.
          --cache-db-wait-time Duration                              How long to wait for the DB to be available - 0 is unlimited (default 1s)
          --cache-info-age Duration                                  How long to cache file structure information (directory listings, file size, times etc). (default 6h0m0s)
          --cache-plex-insecure string                               Skip all certificate verification when connecting to the Plex server
-          --cache-plex-password string                               The password of the Plex user
+          --cache-plex-password string                               The password of the Plex user (obscured)
          --cache-plex-url string                                    The URL of the Plex server
          --cache-plex-username string                               The username of the Plex user
          --cache-read-retries int                                   How many times to retry a read from a cache storage. (default 10)
@@ -9821,8 +9832,8 @@ and may be set in the config file.
      -L, --copy-links                                               Follow symlinks and copy the pointed to item.
          --crypt-directory-name-encryption                          Option to either encrypt directory names or leave them intact. (default true)
          --crypt-filename-encryption string                         How to encrypt the filenames. (default "standard")
-          --crypt-password string                                    Password or pass phrase for encryption.
-          --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended.
+          --crypt-password string                                    Password or pass phrase for encryption. (obscured)
+          --crypt-password2 string                                   Password or pass phrase for salt. Optional but recommended. (obscured)
          --crypt-remote string                                      Remote to encrypt/decrypt.
          --crypt-show-mapping                                       For all files listed show how the names encrypt.
          --drive-acknowledge-abuse                                  Set to allow files which return cannotDownloadAbusiveFile to be downloaded.
@@ -9873,7 +9884,7 @@ and may be set in the config file.
          --ftp-encoding MultiEncoder                                This sets the encoding for the backend. (default Slash,Del,Ctl,RightSpace,Dot)
          --ftp-host string                                          FTP host to connect to
          --ftp-no-check-certificate                                 Do not verify the TLS certificate of the server
-          --ftp-pass string                                          FTP password
+          --ftp-pass string                                          FTP password (obscured)
          --ftp-port string                                          FTP port, leave blank to use default (21)
          --ftp-tls                                                  Use FTP over TLS (Implicit)
          --ftp-user string                                          FTP username, leave blank for current username, $USER
@@ -9910,7 +9921,7 @@ and may be set in the config file.
          --koofr-encoding MultiEncoder                              This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot)
          --koofr-endpoint string                                    The Koofr API endpoint to use (default "https://app.koofr.net")
          --koofr-mountid string                                     Mount ID of the mount to use. If omitted, the primary mount is used.
-          --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password)
+          --koofr-password string                                    Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password) (obscured)
          --koofr-setmtime                                           Does the backend support setting modification time. Set this to false if you use a mount ID that points to a Dropbox or Amazon Drive backend. (default true)
          --koofr-user string                                        Your Koofr user name
      -l, --links                                                    Translate symlinks to/from regular files with a '.rclonelink' extension
@@ -9923,7 +9934,7 @@ and may be set in the config file.
          --local-nounc string                                       Disable UNC (long path names) conversion on Windows
          --mailru-check-hash                                        What should copy do if file checksum is mismatched or invalid (default true)
          --mailru-encoding MultiEncoder                             This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot)
-          --mailru-pass string                                       Password
+          --mailru-pass string                                       Password (obscured)
          --mailru-speedup-enable                                    Skip full upload if there is another file with same data hash. (default true)
          --mailru-speedup-file-patterns string                      Comma separated list of file name patterns eligible for speedup (put by hash). (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf")
          --mailru-speedup-max-disk SizeSuffix                       This option allows you to disable speedup (put by hash) for large files (default 3G)
@@ -9932,7 +9943,7 @@ and may be set in the config file.
          --mega-debug                                               Output more debug from Mega.
          --mega-encoding MultiEncoder                               This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot)
          --mega-hard-delete                                         Delete files permanently rather than putting them into the trash.
-          --mega-pass string                                         Password.
+          --mega-pass string                                         Password. (obscured)
          --mega-user string                                         User name
      -x, --one-file-system                                          Don't cross filesystem boundaries (unix/macOS only).
          --onedrive-chunk-size SizeSuffix                           Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10M)
@@ -9945,7 +9956,7 @@ and may be set in the config file.
          --onedrive-server-side-across-configs                      Allow server side operations (eg copy) to work across different onedrive configs.
          --opendrive-chunk-size SizeSuffix                          Files will be uploaded in chunks this size. (default 10M)
          --opendrive-encoding MultiEncoder                          This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot)
-          --opendrive-password string                                Password.
+          --opendrive-password string                                Password. (obscured)
          --opendrive-username string                                Username
          --pcloud-client-id string                                  Pcloud App Client Id
          --pcloud-client-secret string                              Pcloud App Client Secret
@@ -9996,19 +10007,19 @@ and may be set in the config file.
          --seafile-create-library                                   Should rclone create a library if it doesn't exist
          --seafile-encoding MultiEncoder                            This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8)
          --seafile-library string                                   Name of the library. Leave blank to access all non-encrypted libraries.
-          --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line.
-          --seafile-pass string                                      Password
+          --seafile-library-key string                               Library password (for encrypted libraries only). Leave blank if you pass it through the command line. (obscured)
+          --seafile-pass string                                      Password (obscured)
          --seafile-url string                                       URL of seafile host to connect to
          --seafile-user string                                      User name (usually email address)
          --sftp-ask-password                                        Allow asking for SFTP password when needed.
          --sftp-disable-hashcheck                                   Disable the execution of SSH commands to determine if remote file hashing is available.
          --sftp-host string                                         SSH host to connect to
          --sftp-key-file string                                     Path to PEM-encoded private key file, leave blank or set key-use-agent to use ssh-agent.
-          --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file.
+          --sftp-key-file-pass string                                The passphrase to decrypt the PEM-encoded private key file. (obscured)
          --sftp-key-pem string                                      Raw PEM-encoded private key, If specified, will override key_file parameter.
          --sftp-key-use-agent                                       When set forces the usage of the ssh-agent.
          --sftp-md5sum-command string                               The command used to read md5 hashes. Leave blank for autodetect.
-          --sftp-pass string                                         SSH password, leave blank to use ssh-agent.
+          --sftp-pass string                                         SSH password, leave blank to use ssh-agent. (obscured)
          --sftp-path-override string                                Override path used by SSH connection.
          --sftp-port string                                         SSH port, leave blank to use default (22)
          --sftp-set-modtime                                         Set the modified time on the remote if set. (default true)
@@ -10066,7 +10077,7 @@ and may be set in the config file.
          --union-upstreams string                                   List of space separated upstreams.
          --webdav-bearer-token string                               Bearer token instead of user/pass (eg a Macaroon)
          --webdav-bearer-token-command string                       Command to run to get a bearer token
-          --webdav-pass string                                       Password.
+          --webdav-pass string                                       Password. (obscured)
          --webdav-url string                                        URL of http host to connect to
          --webdav-user string                                       User name
          --webdav-vendor string                                     Name of the Webdav site/service/software you are using
@@ -13652,6 +13663,8 @@ The username of the Plex user

 The password of the Plex user

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: plex_password
 -   Env Var: RCLONE_CACHE_PLEX_PASSWORD
 -   Type: string
@@ -14887,6 +14900,8 @@ NB If filename_encryption is “off” then this option will do nothing.

 Password or pass phrase for encryption.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: password
 -   Env Var: RCLONE_CRYPT_PASSWORD
 -   Type: string
@@ -14897,6 +14912,8 @@ Password or pass phrase for encryption.
 Password or pass phrase for salt. Optional but recommended. Should be
 different to the previous password.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: password2
 -   Env Var: RCLONE_CRYPT_PASSWORD2
 -   Type: string
@@ -15478,6 +15495,8 @@ FTP port, leave blank to use default (21)

 FTP password

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_FTP_PASS
 -   Type: string
@@ -16418,7 +16437,7 @@ For shortcuts pointing to folders:
 -   NB When deleting with rclone remove or rclone mount the contents of
    the linked folder will be deleted.

-It isn’t currently possible to create shortcuts with rclone.
+The rclone backend command can be used to create shortcuts.

 Shortcuts can be completely ignored with the --drive-skip-shortcuts flag
 or the corresponding skip_shortcuts configuration setting.
@@ -16826,6 +16845,8 @@ Size of listing chunk 100-1000. 0 to disable.

 Impersonate this user when using a service account.

+Note that if this is used then “root_folder_id” will be ignored.
+
 -   Config: impersonate
 -   Env Var: RCLONE_DRIVE_IMPERSONATE
 -   Type: string
@@ -18315,6 +18336,8 @@ Your Koofr user name
 Your Koofr password for rclone (generate one at
 https://app.koofr.net/app/admin/preferences/password)

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: password
 -   Env Var: RCLONE_KOOFR_PASSWORD
 -   Type: string
@@ -18550,6 +18573,8 @@ User name (usually email)

 Password

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_MAILRU_PASS
 -   Type: string
@@ -18848,6 +18873,8 @@ User name

 Password.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_MEGA_PASS
 -   Type: string
@@ -19834,6 +19861,8 @@ Username

 Password.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: password
 -   Env Var: RCLONE_OPENDRIVE_PASSWORD
 -   Type: string
@@ -21379,6 +21408,8 @@ User name (usually email address)

 Password

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_SEAFILE_PASS
 -   Type: string
@@ -21407,6 +21438,8 @@ Name of the library. Leave blank to access all non-encrypted libraries.
 Library password (for encrypted libraries only). Leave blank if you pass
 it through the command line.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: library_key
 -   Env Var: RCLONE_SEAFILE_LIBRARY_KEY
 -   Type: string
@@ -21634,6 +21667,8 @@ SSH port, leave blank to use default (22)

 SSH password, leave blank to use ssh-agent.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_SFTP_PASS
 -   Type: string
@@ -21666,6 +21701,8 @@ The passphrase to decrypt the PEM-encoded private key file.
 Only PEM encrypted key files (old OpenSSH format) are supported.
 Encrypted keys in the new OpenSSH format can’t be used.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: key_file_pass
 -   Env Var: RCLONE_SFTP_KEY_FILE_PASS
 -   Type: string
@@ -22826,6 +22863,8 @@ User name

 Password.

+NB Input to this must be obscured - see rclone obscure.
+
 -   Config: pass
 -   Env Var: RCLONE_WEBDAV_PASS
 -   Type: string
@@ -23597,6 +23636,89 @@ Options:
 CHANGELOG


+v1.52.2 - 2020-06-24
+
+See commits
+
+-   Bug Fixes
+    -   build
+        -   Fix docker release build action (Nick Craig-Wood)
+        -   Fix custom timezone in Docker image (NoLooseEnds)
+    -   check: Fix misleading message which printed errors instead of
+        differences (Nick Craig-Wood)
+    -   errors: Add WSAECONNREFUSED and more to the list of retriable
+        Windows errors (Nick Craig-Wood)
+    -   rcd: Fix incorrect prometheus metrics (Gary Kim)
+    -   serve restic: Fix flags so they use environment variables (Nick
+        Craig-Wood)
+    -   serve webdav: Fix flags so they use environment variables (Nick
+        Craig-Wood)
+    -   sync: Fix –track-renames-strategy modtime (Nick Craig-Wood)
+-   Drive
+    -   Fix not being able to delete a directory with a trashed shortcut
+        (Nick Craig-Wood)
+    -   Fix creating a directory inside a shortcut (Nick Craig-Wood)
+    -   Fix –drive-impersonate with cached root_folder_id (Nick
+        Craig-Wood)
+-   SFTP
+    -   Fix SSH key PEM loading (Zac Rubin)
+-   Swift
+    -   Speed up deletes by not retrying segment container deletes (Nick
+        Craig-Wood)
+-   Tardigrade
+    -   Upgrade to uplink v1.1.1 (Caleb Case)
+-   WebDAV
+    -   Fix free/used display for rclone about/df for certain backends
+        (Nick Craig-Wood)
+
+
+v1.52.1 - 2020-06-10
+
+See commits
+
+-   Bug Fixes
+    -   lib/file: Fix SetSparse on Windows 7 which fixes downloads of
+        files > 250MB (Nick Craig-Wood)
+    -   build
+        -   Update go.mod to go1.14 to enable -mod=vendor build (Nick
+            Craig-Wood)
+        -   Remove quicktest from Dockerfile (Nick Craig-Wood)
+        -   Build Docker images with GitHub actions (Matteo Pietro
+            Dazzi)
+        -   Update Docker build workflows (Nick Craig-Wood)
+        -   Set user_allow_other in /etc/fuse.conf in the Docker image
+            (Nick Craig-Wood)
+        -   Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
+    -   docs
+        -   Add link to source and modified time to footer of every page
+            (Nick Craig-Wood)
+        -   Remove manually set dates and use git dates instead (Nick
+            Craig-Wood)
+        -   Minor tense, punctuation, brevity and positivity changes for
+            the home page (edwardxml)
+        -   Remove leading slash in page reference in footer when
+            present (Nick Craig-Wood)
+        -   Note commands which need obscured input in the docs (Nick
+            Craig-Wood)
+        -   obscure: Write more help as we are referencing it elsewhere
+            (Nick Craig-Wood)
+-   VFS
+    -   Fix OS vs Unix path confusion - fixes ChangeNotify on Windows
+        (Nick Craig-Wood)
+-   Drive
+    -   Fix missing items when listing using –fast-list / ListR (Nick
+        Craig-Wood)
+-   Putio
+    -   Fix panic on Object.Open (Cenk Alti)
+-   S3
+    -   Fix upload of single files into buckets without create
+        permission (Nick Craig-Wood)
+    -   Fix –header-upload (Nick Craig-Wood)
+-   Tardigrade
+    -   Fix listing bug by upgrading to v1.0.7
+    -   Set UserAgent to rclone (Caleb Case)
+
+
 v1.52.0 - 2020-05-27

 Special thanks to Martin Michlmayr for proof reading and correcting all
--- a/2
+++ b/2
@@ -1 +1 @@
-v1.52.0
+v1.52.2
--- a/backend/cache/cache_internal_test.go
+++ b/backend/cache/cache_internal_test.go
@@ -33,6 +33,7 @@ import (
 	"github.com/rclone/rclone/fs/object"
 	"github.com/rclone/rclone/fs/rc"
 	"github.com/rclone/rclone/fstest"
+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/lib/random"
 	"github.com/rclone/rclone/vfs"
 	"github.com/rclone/rclone/vfs/vfsflags"
@@ -299,6 +300,7 @@ func TestInternalRemoteWrittenFileFoundInMount(t *testing.T) {
 }

 func TestInternalCachedWrittenContentMatches(t *testing.T) {
+	testy.SkipUnreliable(t)
 	id := fmt.Sprintf("ticwcm%v", time.Now().Unix())
 	rootFs, boltDb := runInstance.newCacheFs(t, remoteName, id, false, true, nil, nil)
 	defer runInstance.cleanupFs(t, rootFs, boltDb)
@@ -342,6 +344,7 @@ func TestInternalDoubleWrittenContentMatches(t *testing.T) {
 }

 func TestInternalCachedUpdatedContentMatches(t *testing.T) {
+	testy.SkipUnreliable(t)
 	id := fmt.Sprintf("ticucm%v", time.Now().Unix())
 	rootFs, boltDb := runInstance.newCacheFs(t, remoteName, id, false, true, nil, nil)
 	defer runInstance.cleanupFs(t, rootFs, boltDb)
--- a/backend/drive/drive.go
+++ b/backend/drive/drive.go
@@ -24,6 +24,7 @@ import (
 	"strconv"
 	"strings"
 	"sync"
+	"sync/atomic"
 	"text/template"
 	"time"

@@ -68,6 +69,8 @@ const (
 	minChunkSize     = 256 * fs.KibiByte
 	defaultChunkSize = 8 * fs.MebiByte
 	partialFields    = "id,name,size,md5Checksum,trashed,modifiedTime,createdTime,mimeType,parents,webViewLink,shortcutDetails"
+	listRGrouping    = 50   // number of IDs to search at once when using ListR
+	listRInputBuffer = 1000 // size of input buffer when using ListR
 )

 // Globals
@@ -346,9 +349,12 @@ date is used.`,
 			Help:     "Size of listing chunk 100-1000. 0 to disable.",
 			Advanced: true,
 		}, {
-			Name:     "impersonate",
-			Default:  "",
-			Help:     "Impersonate this user when using a service account.",
+			Name:    "impersonate",
+			Default: "",
+			Help: `Impersonate this user when using a service account.
+
+Note that if this is used then "root_folder_id" will be ignored.
+`,
 			Advanced: true,
 		}, {
 			Name:    "alternate_export",
@@ -558,6 +564,9 @@ type Fs struct {
 	isTeamDrive      bool               // true if this is a team drive
 	fileFields       googleapi.Field    // fields to fetch file info with
 	m                configmap.Mapper
+	grouping         int32               // number of IDs to search at once in ListR - read with atomic
+	listRmu          *sync.Mutex         // protects listRempties
+	listRempties     map[string]struct{} // IDs of supposedly empty directories which triggered grouping disable
 }

 type baseObject struct {
@@ -1079,11 +1088,14 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 	}

 	f := &Fs{
-		name:  name,
-		root:  root,
-		opt:   *opt,
-		pacer: newPacer(opt),
-		m:     m,
+		name:         name,
+		root:         root,
+		opt:          *opt,
+		pacer:        newPacer(opt),
+		m:            m,
+		grouping:     listRGrouping,
+		listRmu:      new(sync.Mutex),
+		listRempties: make(map[string]struct{}),
 	}
 	f.isTeamDrive = opt.TeamDriveID != ""
 	f.fileFields = f.getFileFields()
@@ -1109,9 +1121,20 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 		}
 	}

+	// If impersonating warn about root_folder_id if set and unset it
+	//
+	// This is because rclone v1.51 and v1.52 cached root_folder_id when
+	// using impersonate which they shouldn't have done. It is possible
+	// someone is using impersonate and root_folder_id in which case this
+	// breaks their workflow. There isn't an easy way around that.
+	if opt.RootFolderID != "" && opt.Impersonate != "" {
+		fs.Logf(f, "Ignoring cached root_folder_id when using --drive-impersonate")
+		opt.RootFolderID = ""
+	}
+
 	// set root folder for a team drive or query the user root folder
 	if opt.RootFolderID != "" {
-		// override root folder if set or cached in the config
+		// override root folder if set or cached in the config and not impersonating
 		f.rootFolderID = opt.RootFolderID
 	} else if f.isTeamDrive {
 		f.rootFolderID = f.opt.TeamDriveID
@@ -1128,7 +1151,10 @@ func NewFs(name, path string, m configmap.Mapper) (fs.Fs, error) {
 			}
 		}
 		f.rootFolderID = rootID
-		m.Set("root_folder_id", rootID)
+		// Don't cache the root folder ID if impersonating
+		if opt.Impersonate == "" {
+			m.Set("root_folder_id", rootID)
+		}
 	}

 	f.dirCache = dircache.New(root, f.rootFolderID, f)
@@ -1402,6 +1428,7 @@ func (f *Fs) CreateDir(ctx context.Context, pathID, leaf string) (newID string,
 	leaf = f.opt.Enc.FromStandardName(leaf)
 	// fmt.Println("Making", path)
 	// Define the metadata for the directory we are going to create.
+	pathID = actualID(pathID)
 	createInfo := &drive.File{
 		Name:        leaf,
 		Description: leaf,
@@ -1634,15 +1661,17 @@ func (s listRSlices) Less(i, j int) bool {
 // In each cycle it will read up to grouping entries from the in channel without blocking.
 // If an error occurs it will be send to the out channel and then return. Once the in channel is closed,
 // nil is send to the out channel and the function returns.
-func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan listREntry, out chan<- error, cb func(fs.DirEntry) error, grouping int) {
+func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in chan listREntry, out chan<- error, cb func(fs.DirEntry) error) {
 	var dirs []string
 	var paths []string
+	var grouping int32

 	for dir := range in {
 		dirs = append(dirs[:0], dir.id)
 		paths = append(paths[:0], dir.path)
+		grouping = atomic.LoadInt32(&f.grouping)
 	waitloop:
-		for i := 1; i < grouping; i++ {
+		for i := int32(1); i < grouping; i++ {
 			select {
 			case d, ok := <-in:
 				if !ok {
@@ -1655,6 +1684,7 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 		}
 		listRSlices{dirs, paths}.Sort()
 		var iErr error
+		foundItems := false
 		_, err := f.list(ctx, dirs, "", false, false, false, func(item *drive.File) bool {
 			// shared with me items have no parents when at the root
 			if f.opt.SharedWithMe && len(item.Parents) == 0 && len(paths) == 1 && paths[0] == "" {
@@ -1662,6 +1692,7 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 			}
 			for _, parent := range item.Parents {
 				var i int
+				foundItems = true
 				earlyExit := false
 				// If only one item in paths then no need to search for the ID
 				// assuming google drive is doing its job properly.
@@ -1702,6 +1733,53 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 			}
 			return false
 		})
+		// Found no items in more than one directory. Retry these as
+		// individual directories This is to work around a bug in google
+		// drive where (A in parents) or (B in parents) returns nothing
+		// sometimes. See #3114, #4289 and
+		// https://issuetracker.google.com/issues/149522397
+		if len(dirs) > 1 && !foundItems {
+			if atomic.SwapInt32(&f.grouping, 1) != 1 {
+				fs.Logf(f, "Disabling ListR to work around bug in drive as multi listing (%d) returned no entries", len(dirs))
+			}
+			var recycled = make([]listREntry, len(dirs))
+			f.listRmu.Lock()
+			for i := range dirs {
+				recycled[i] = listREntry{id: dirs[i], path: paths[i]}
+				// Make a note of these dirs - if they all turn
+				// out to be empty then we can re-enable grouping
+				f.listRempties[dirs[i]] = struct{}{}
+			}
+			f.listRmu.Unlock()
+			// recycle these in the background so we don't deadlock
+			// the listR runners if they all get here
+			wg.Add(len(recycled))
+			go func() {
+				for _, entry := range recycled {
+					in <- entry
+				}
+				fs.Debugf(f, "Recycled %d entries", len(recycled))
+			}()
+		}
+		// If using a grouping of 1 and dir was empty then check to see if it
+		// is part of the group that caused grouping to be disabled.
+		if grouping == 1 && len(dirs) == 1 && !foundItems {
+			f.listRmu.Lock()
+			if _, found := f.listRempties[dirs[0]]; found {
+				// Remove the ID
+				delete(f.listRempties, dirs[0])
+				// If no empties left => all the directories that
+				// triggered the grouping being set to 1 were actually
+				// empty so must have made a mistake
+				if len(f.listRempties) == 0 {
+					if atomic.SwapInt32(&f.grouping, listRGrouping) != listRGrouping {
+						fs.Logf(f, "Re-enabling ListR as previous detection was in error")
+					}
+				}
+			}
+			f.listRmu.Unlock()
+		}
+
 		for range dirs {
 			wg.Done()
 		}
@@ -1736,11 +1814,6 @@ func (f *Fs) listRRunner(ctx context.Context, wg *sync.WaitGroup, in <-chan list
 // Don't implement this unless you have a more efficient way
 // of listing recursively that doing a directory traversal.
 func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (err error) {
-	const (
-		grouping    = 50
-		inputBuffer = 1000
-	)
-
 	err = f.dirCache.FindRoot(ctx, false)
 	if err != nil {
 		return err
@@ -1753,7 +1826,7 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (

 	mu := sync.Mutex{} // protects in and overflow
 	wg := sync.WaitGroup{}
-	in := make(chan listREntry, inputBuffer)
+	in := make(chan listREntry, listRInputBuffer)
 	out := make(chan error, fs.Config.Checkers)
 	list := walk.NewListRHelper(callback)
 	overflow := []listREntry{}
@@ -1766,6 +1839,9 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 			job := listREntry{actualID(d.ID()), d.Remote()}
 			select {
 			case in <- job:
+				// Adding the wg after we've entered the item is
+				// safe here because we know when the callback
+				// is called we are holding a waitgroup.
 				wg.Add(1)
 			default:
 				overflow = append(overflow, job)
@@ -1779,7 +1855,7 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 	in <- listREntry{directoryID, dir}

 	for i := 0; i < fs.Config.Checkers; i++ {
-		go f.listRRunner(ctx, &wg, in, out, cb, grouping)
+		go f.listRRunner(ctx, &wg, in, out, cb)
 	}
 	go func() {
 		// wait until the all directories are processed
@@ -1789,8 +1865,8 @@ func (f *Fs) ListR(ctx context.Context, dir string, callback fs.ListRCallback) (
 			mu.Lock()
 			l := len(overflow)
 			// only fill half of the channel to prevent entries being put into overflow again
-			if l > inputBuffer/2 {
-				l = inputBuffer / 2
+			if l > listRInputBuffer/2 {
+				l = listRInputBuffer / 2
 			}
 			wg.Add(l)
 			for _, d := range overflow[:l] {
@@ -1914,9 +1990,10 @@ func (f *Fs) resolveShortcut(item *drive.File) (newItem *drive.File, err error)
 	if err != nil {
 		return nil, errors.Wrap(err, "failed to resolve shortcut")
 	}
-	// make sure we use the Name and Parents from the original item
+	// make sure we use the Name, Parents and Trashed from the original item
 	newItem.Name = item.Name
 	newItem.Parents = item.Parents
+	newItem.Trashed = item.Trashed
 	// the new ID is a composite ID
 	newItem.Id = joinID(newItem.Id, item.Id)
 	return newItem, nil
--- a/backend/putio/object.go
+++ b/backend/putio/object.go
@@ -248,7 +248,10 @@ func (o *Object) Open(ctx context.Context, options ...fs.OpenOption) (in io.Read
 		_ = resp.Body.Close()
 		return nil, fserrors.NoRetryError(err)
 	}
-	return resp.Body, err
+	if err != nil {
+		return nil, err
+	}
+	return resp.Body, nil
 }

 // Update the already existing object
--- a/backend/s3/s3.go
+++ b/backend/s3/s3.go
@@ -59,6 +59,7 @@ import (
 	"github.com/rclone/rclone/lib/pool"
 	"github.com/rclone/rclone/lib/readers"
 	"github.com/rclone/rclone/lib/rest"
+	"github.com/rclone/rclone/lib/structs"
 	"golang.org/x/sync/errgroup"
 )

@@ -2033,11 +2034,17 @@ func (o *Object) readMetaData(ctx context.Context) (err error) {
 	if err != nil {
 		if awsErr, ok := err.(awserr.RequestFailure); ok {
 			if awsErr.StatusCode() == http.StatusNotFound {
+				// NotFound indicates bucket was OK
+				// NoSuchBucket would be returned if bucket was bad
+				if awsErr.Code() == "NotFound" {
+					o.fs.cache.MarkOK(bucket)
+				}
 				return fs.ErrorObjectNotFound
 			}
 		}
 		return err
 	}
+	o.fs.cache.MarkOK(bucket)
 	var size int64
 	// Ignore missing Content-Length assuming it is 0
 	// Some versions of ceph do this due their apache proxies
@@ -2198,19 +2205,12 @@ func (o *Object) uploadMultipart(ctx context.Context, req *s3.PutObjectInput, si

 	memPool := f.getMemoryPool(int64(partSize))

+	var mReq s3.CreateMultipartUploadInput
+	structs.SetFrom(&mReq, req)
 	var cout *s3.CreateMultipartUploadOutput
 	err = f.pacer.Call(func() (bool, error) {
 		var err error
-		cout, err = f.c.CreateMultipartUploadWithContext(ctx, &s3.CreateMultipartUploadInput{
-			Bucket:               req.Bucket,
-			ACL:                  req.ACL,
-			Key:                  req.Key,
-			ContentType:          req.ContentType,
-			Metadata:             req.Metadata,
-			ServerSideEncryption: req.ServerSideEncryption,
-			SSEKMSKeyId:          req.SSEKMSKeyId,
-			StorageClass:         req.StorageClass,
-		})
+		cout, err = f.c.CreateMultipartUploadWithContext(ctx, &mReq)
 		return f.shouldRetry(err)
 	})
 	if err != nil {
@@ -2423,6 +2423,35 @@ func (o *Object) Update(ctx context.Context, in io.Reader, src fs.ObjectInfo, op
 	if o.fs.opt.StorageClass != "" {
 		req.StorageClass = &o.fs.opt.StorageClass
 	}
+	// Apply upload options
+	for _, option := range options {
+		key, value := option.Header()
+		lowerKey := strings.ToLower(key)
+		switch lowerKey {
+		case "":
+			// ignore
+		case "cache-control":
+			req.CacheControl = aws.String(value)
+		case "content-disposition":
+			req.ContentDisposition = aws.String(value)
+		case "content-encoding":
+			req.ContentEncoding = aws.String(value)
+		case "content-language":
+			req.ContentLanguage = aws.String(value)
+		case "content-type":
+			req.ContentType = aws.String(value)
+		case "x-amz-tagging":
+			req.Tagging = aws.String(value)
+		default:
+			const amzMetaPrefix = "x-amz-meta-"
+			if strings.HasPrefix(lowerKey, amzMetaPrefix) {
+				metaKey := lowerKey[len(amzMetaPrefix):]
+				req.Metadata[metaKey] = aws.String(value)
+			} else {
+				fs.Errorf(o, "Don't know how to set key %q on upload", key)
+			}
+		}
+	}

 	if multipart {
 		err = o.uploadMultipart(ctx, &req, size, in)
@@ -2463,18 +2492,6 @@ func (o *Object) Update(ctx context.Context, in io.Reader, src fs.ObjectInfo, op
 		httpReq.Header = headers
 		httpReq.ContentLength = size

-		for _, option := range options {
-			switch option.(type) {
-			case *fs.HTTPOption:
-				key, value := option.Header()
-				httpReq.Header.Add(key, value)
-			default:
-				if option.Mandatory() {
-					fs.Logf(o, "Unsupported mandatory option: %v", option)
-				}
-			}
-		}
-
 		err = o.fs.pacer.CallNoRetry(func() (bool, error) {
 			resp, err := o.fs.srv.Do(httpReq)
 			if err != nil {
--- a/backend/sftp/sftp.go
+++ b/backend/sftp/sftp.go
@@ -395,8 +395,8 @@ func NewFs(name, root string, m configmap.Mapper) (fs.Fs, error) {

 	keyFile := env.ShellExpand(opt.KeyFile)
 	//keyPem := env.ShellExpand(opt.KeyPem)
-	// Add ssh agent-auth if no password or file specified
-	if (opt.Pass == "" && keyFile == "" && !opt.AskPassword) || opt.KeyUseAgent {
+	// Add ssh agent-auth if no password or file or key PEM specified
+	if (opt.Pass == "" && keyFile == "" && !opt.AskPassword && opt.KeyPem == "") || opt.KeyUseAgent {
 		sshAgentClient, _, err := sshagent.New()
 		if err != nil {
 			return nil, errors.Wrap(err, "couldn't connect to ssh-agent")
--- a/backend/swift/swift.go
+++ b/backend/swift/swift.go
@@ -1124,6 +1124,9 @@ func (o *Object) removeSegments(except string) error {
 	// remove the segments container if empty, ignore errors
 	err = o.fs.pacer.Call(func() (bool, error) {
 		err = o.fs.c.ContainerDelete(segmentsContainer)
+		if err == swift.ContainerNotFound || err == swift.ContainerNotEmpty {
+			return false, err
+		}
 		return shouldRetry(err)
 	})
 	if err == nil {
--- a/backend/tardigrade/fs.go
+++ b/backend/tardigrade/fs.go
@@ -269,7 +269,9 @@ func (f *Fs) connect(ctx context.Context) (project *uplink.Project, err error) {
 	fs.Debugf(f, "connecting...")
 	defer fs.Debugf(f, "connected: %+v", err)

-	cfg := uplink.Config{}
+	cfg := uplink.Config{
+		UserAgent: "rclone",
+	}

 	project, err = cfg.OpenProject(ctx, f.access)
 	if err != nil {
--- a/backend/webdav/api/types.go
+++ b/backend/webdav/api/types.go
@@ -226,6 +226,6 @@ func (t *Time) UnmarshalXML(d *xml.Decoder, start xml.StartElement) error {
 //  </d:response>
 // </d:multistatus>
 type Quota struct {
-	Available int64 `xml:"DAV: response>propstat>prop>quota-available-bytes"`
-	Used      int64 `xml:"DAV: response>propstat>prop>quota-used-bytes"`
+	Available string `xml:"DAV: response>propstat>prop>quota-available-bytes"`
+	Used      string `xml:"DAV: response>propstat>prop>quota-used-bytes"`
 }
--- a/backend/webdav/webdav.go
+++ b/backend/webdav/webdav.go
@@ -17,6 +17,7 @@ import (
 	"net/url"
 	"os/exec"
 	"path"
+	"strconv"
 	"strings"
 	"time"

@@ -975,10 +976,7 @@ func (f *Fs) About(ctx context.Context) (*fs.Usage, error) {
 </D:prop>
 </D:propfind>
 `))
-	var q = api.Quota{
-		Available: -1,
-		Used:      -1,
-	}
+	var q api.Quota
 	var resp *http.Response
 	var err error
 	err = f.pacer.Call(func() (bool, error) {
@@ -989,14 +987,14 @@ func (f *Fs) About(ctx context.Context) (*fs.Usage, error) {
 		return nil, errors.Wrap(err, "about call failed")
 	}
 	usage := &fs.Usage{}
-	if q.Used >= 0 {
-		usage.Used = fs.NewUsageValue(q.Used)
+	if i, err := strconv.ParseInt(q.Used, 10, 64); err == nil && i >= 0 {
+		usage.Used = fs.NewUsageValue(i)
 	}
-	if q.Available >= 0 {
-		usage.Free = fs.NewUsageValue(q.Available)
+	if i, err := strconv.ParseInt(q.Available, 10, 64); err == nil && i >= 0 {
+		usage.Free = fs.NewUsageValue(i)
 	}
-	if q.Available >= 0 && q.Used >= 0 {
-		usage.Total = fs.NewUsageValue(q.Available + q.Used)
+	if usage.Used != nil && usage.Free != nil {
+		usage.Total = fs.NewUsageValue(*usage.Used + *usage.Free)
 	}
 	return usage, nil
 }
--- a/cmd/cmd.go
+++ b/cmd/cmd.go
@@ -486,6 +486,9 @@ func AddBackendFlags() {
 					help = help[:nl]
 				}
 				help = strings.TrimSpace(help)
+				if opt.IsPassword {
+					help += " (obscured)"
+				}
 				flag := pflag.CommandLine.VarPF(opt, name, opt.ShortOpt, help)
 				if _, isBool := opt.Default.(bool); isBool {
 					flag.NoOptDefVal = "true"
--- a/cmd/cmount/mount_test.go
+++ b/cmd/cmount/mount_test.go
@@ -11,9 +11,11 @@ package cmount
 import (
 	"testing"

+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/vfs/vfstest"
 )

 func TestMount(t *testing.T) {
+	testy.SkipUnreliable(t)
 	vfstest.RunTests(t, false, mount)
 }
--- a/cmd/gendocs/gendocs.go
+++ b/cmd/gendocs/gendocs.go
@@ -33,7 +33,6 @@ type frontmatter struct {
 }

 var frontmatterTemplate = template.Must(template.New("frontmatter").Parse(`---
-date: {{ .Date }}
 title: "{{ .Title }}"
 description: "{{ .Description }}"
 slug: {{ .Slug }}
@@ -70,8 +69,7 @@ rclone.org website.`,
 		if err != nil {
 			return err
 		}
-		flagsHelp := strings.Replace(buf.String(), "YYYY-MM-DD", now, -1)
-		err = ioutil.WriteFile(filepath.Join(root, "flags.md"), []byte(flagsHelp), 0777)
+		err = ioutil.WriteFile(filepath.Join(root, "flags.md"), buf.Bytes(), 0777)
 		if err != nil {
 			return err
 		}
--- a/cmd/help.go
+++ b/cmd/help.go
@@ -245,7 +245,6 @@ Use "rclone help backends" for a list of supported services.
 var docFlagsTemplate = `---
 title: "Global Flags"
 description: "Rclone Global Flags"
-date: "YYYY-MM-DD"
 ---

 # Global Flags
@@ -325,6 +324,9 @@ func showBackend(name string) {
 			}
 			fmt.Printf("#### --%s%s\n\n", opt.FlagName(backend.Prefix), shortOpt)
 			fmt.Printf("%s\n\n", opt.Help)
+			if opt.IsPassword {
+				fmt.Printf("**NB** Input to this must be obscured - see [rclone obscure](/commands/rclone_obscure/).\n\n")
+			}
 			fmt.Printf("- Config:      %s\n", opt.Name)
 			fmt.Printf("- Env Var:     %s\n", opt.EnvVarName(backend.Prefix))
 			fmt.Printf("- Type:        %s\n", opt.Type())
--- a/cmd/mount2/mount_test.go
+++ b/cmd/mount2/mount_test.go
@@ -5,9 +5,11 @@ package mount2
 import (
 	"testing"

+	"github.com/rclone/rclone/fstest/testy"
 	"github.com/rclone/rclone/vfs/vfstest"
 )

 func TestMount(t *testing.T) {
+	testy.SkipUnreliable(t)
 	vfstest.RunTests(t, false, mount)
 }
--- a/cmd/mountlib/rc_test.go
+++ b/cmd/mountlib/rc_test.go
@@ -78,7 +78,9 @@ func TestRc(t *testing.T) {

 		// mount
 		_, err = mount.Fn(ctx, in)
-		require.NoError(t, err)
+		if err != nil {
+			t.Skipf("Mount failed - skipping test: %v", err)
+		}

 		// check file.txt is there now
 		fi, err := os.Stat(filePath)
--- a/cmd/obscure/obscure.go
+++ b/cmd/obscure/obscure.go
@@ -14,7 +14,21 @@ func init() {

 var commandDefinition = &cobra.Command{
 	Use:   "obscure password",
-	Short: `Obscure password for use in the rclone.conf`,
+	Short: `Obscure password for use in the rclone config file`,
+	Long: `In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](/commands/rclone_config/) for more
+info.`,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(1, 1, command, args)
 		cmd.Run(false, false, command, func() error {
--- a/cmd/serve/restic/restic.go
+++ b/cmd/serve/restic/restic.go
@@ -17,6 +17,7 @@ import (
 	"github.com/rclone/rclone/cmd/serve/httplib/serve"
 	"github.com/rclone/rclone/fs"
 	"github.com/rclone/rclone/fs/accounting"
+	"github.com/rclone/rclone/fs/config/flags"
 	"github.com/rclone/rclone/fs/fserrors"
 	"github.com/rclone/rclone/fs/operations"
 	"github.com/rclone/rclone/fs/walk"
@@ -33,9 +34,10 @@ var (

 func init() {
 	httpflags.AddFlags(Command.Flags())
-	Command.Flags().BoolVar(&stdio, "stdio", false, "run an HTTP2 server on stdin/stdout")
-	Command.Flags().BoolVar(&appendOnly, "append-only", false, "disallow deletion of repository data")
-	Command.Flags().BoolVar(&privateRepos, "private-repos", false, "users can only access their private repo")
+	flagSet := Command.Flags()
+	flags.BoolVarP(flagSet, &stdio, "stdio", "", false, "run an HTTP2 server on stdin/stdout")
+	flags.BoolVarP(flagSet, &appendOnly, "append-only", "", false, "disallow deletion of repository data")
+	flags.BoolVarP(flagSet, &privateRepos, "private-repos", "", false, "users can only access their private repo")
 }

 // Command definition for cobra
--- a/cmd/serve/webdav/webdav.go
+++ b/cmd/serve/webdav/webdav.go
@@ -15,6 +15,7 @@ import (
 	"github.com/rclone/rclone/cmd/serve/proxy"
 	"github.com/rclone/rclone/cmd/serve/proxy/proxyflags"
 	"github.com/rclone/rclone/fs"
+	"github.com/rclone/rclone/fs/config/flags"
 	"github.com/rclone/rclone/fs/hash"
 	"github.com/rclone/rclone/lib/errors"
 	"github.com/rclone/rclone/vfs"
@@ -30,11 +31,12 @@ var (
 )

 func init() {
-	httpflags.AddFlags(Command.Flags())
-	vfsflags.AddFlags(Command.Flags())
-	proxyflags.AddFlags(Command.Flags())
-	Command.Flags().StringVar(&hashName, "etag-hash", "", "Which hash to use for the ETag, or auto or blank for off")
-	Command.Flags().BoolVar(&disableGETDir, "disable-dir-list", false, "Disable HTML directory list on GET request for a directory")
+	flagSet := Command.Flags()
+	httpflags.AddFlags(flagSet)
+	vfsflags.AddFlags(flagSet)
+	proxyflags.AddFlags(flagSet)
+	flags.StringVarP(flagSet, &hashName, "etag-hash", "", "", "Which hash to use for the ETag, or auto or blank for off")
+	flags.BoolVarP(flagSet, &disableGETDir, "disable-dir-list", "", false, "Disable HTML directory list on GET request for a directory")
 }

 // Command definition for cobra
--- a/docs/config.json
+++ b/docs/config.json
@@ -16,6 +16,7 @@
    "~$",
    "^\\."
  ],
+  "enableGitInfo": true,
  "markup": {
    "goldmark": {
      "extensions": {
--- a/docs/content/_index.md
+++ b/docs/content/_index.md
@@ -2,7 +2,6 @@
 title: "Rclone"
 description: "Rclone syncs your files to cloud storage: Google Drive, S3, Swift, Dropbox, Google Cloud Storage, Azure, Box and many more."
 type: page
-date: "2020-05-16"
 ---

 # Rclone syncs your files to cloud storage
@@ -10,9 +9,9 @@ date: "2020-05-16"
 {{< img width="50%" src="/img/logo_on_light__horizontal_color.svg" alt="rclone logo" style="float:right; padding: 5px;" >}}

 - [About rclone](#about)
- [What can rclone do for you](#what)
- [What features does rclone have](#features)
- [What providers does rclone support](#providers)
+- [What can rclone do for you?](#what)
+- [What features does rclone have?](#features)
+- [What providers does rclone support?](#providers)
 - [Download](/downloads/)
 - [Install](/install/)
 {{< rem MAINPAGELINK >}}
@@ -27,20 +26,20 @@ services, as well as standard transfer protocols.

 Rclone has powerful cloud equivalents to the unix commands rsync, cp,
 mv, mount, ls, ncdu, tree, rm, and cat. Rclone's familiar syntax
-includes shell pipeline support, and `--dry-run` protection. It can be
+includes shell pipeline support, and `--dry-run` protection. It is
 used at the command line, in scripts or via its [API](/rc).

-Users have called rclone *"The Swiss army knife of cloud storage"* and
+Users call rclone *"The Swiss army knife of cloud storage"*, and
 *"Technology indistinguishable from magic"*.

 Rclone really looks after your data. It preserves timestamps and
-verifies your data at all times. Transfers over limited bandwidth;
+verifies checksums at all times. Transfers over limited bandwidth;
 intermittent connections, or subject to quota can be restarted, from
 the last good file transferred. You can
 [check](/commands/rclone_check/) the integrity of your files. Where
 possible, rclone employs server side transfers to minimise local
 bandwidth use and transfers from one provider to another without
-using your local disk.
+using local disk.

 Virtual backends wrap local and cloud file systems to apply
 [encryption](/crypt/), 
@@ -48,9 +47,9 @@ Virtual backends wrap local and cloud file systems to apply
 [chunking](/chunker/) and
 [joining](/union/).

-Rclone can [mount](/commands/rclone_mount/) any local, cloud or
+Rclone [mounts](/commands/rclone_mount/) any local, cloud or
 virtual filesystem as a disk on Windows,
-macOS, linux and FreeBSD, and also serve these over
+macOS, linux and FreeBSD, and also serves these over
 [SFTP](/commands/rclone_serve_sftp/),
 [HTTP](/commands/rclone_serve_http/),
 [WebDAV](/commands/rclone_serve_webdav/),
@@ -64,14 +63,14 @@ Fedora, Brew and Chocolatey repos. include rclone. For the latest
 version [downloading from rclone.org](/downloads/) is recommended.

 Rclone is widely used on Linux, Windows and Mac. Third party
-developers have built innovative backup, restore, GUI and business
+developers create innovative backup, restore, GUI and business
 process solutions using the rclone command line or API.

-Let rclone do the heavy lifting of communicating with cloud storage.
+Rclone does the heavy lifting of communicating with cloud storage.

-## What can rclone do for you {#what}
+## What can rclone do for you? {#what}

-Rclone can help you:
+Rclone helps you:

 - Backup (and encrypt) files to cloud storage
 - Restore (and decrypt) files from cloud storage
@@ -99,7 +98,7 @@ Rclone can help you:

 ## Supported providers {#providers}

-(There are many other providers, built on standard protocols such as
+(There are many others, built on standard protocols such as
 WebDAV or S3, that work out of the box.)

 {{< provider_list >}}
--- a/docs/content/alias.md
+++ b/docs/content/alias.md
@@ -1,7 +1,6 @@
 ---
 title: "Alias"
 description: "Remote Aliases"
-date: "2018-01-30"
 ---

 {{< icon "fa fa-link" >}} Alias
--- a/docs/content/amazonclouddrive.md
+++ b/docs/content/amazonclouddrive.md
@@ -1,7 +1,6 @@
 ---
 title: "Amazon Drive"
 description: "Rclone docs for Amazon Drive"
-date: "2017-06-10"
 ---

 {{< icon "fab fa-amazon" >}} Amazon Drive
--- a/docs/content/authors.md
+++ b/docs/content/authors.md
@@ -1,7 +1,6 @@
 ---
 title: "Authors"
 description: "Rclone Authors and Contributors"
-date: "2016-11-02"
 ---

 Authors
--- a/docs/content/azureblob.md
+++ b/docs/content/azureblob.md
@@ -1,7 +1,6 @@
 ---
 title: "Microsoft Azure Blob Storage"
 description: "Rclone docs for Microsoft Azure Blob Storage"
-date: "2017-07-30"
 ---

 {{< icon "fab fa-windows" >}} Microsoft Azure Blob Storage
--- a/docs/content/b2.md
+++ b/docs/content/b2.md
@@ -1,7 +1,6 @@
 ---
 title: "B2"
 description: "Backblaze B2"
-date: "2016-10-25"
 ---

 {{< icon "fa fa-fire" >}} Backblaze B2
--- a/docs/content/box.md
+++ b/docs/content/box.md
@@ -1,7 +1,6 @@
 ---
 title: "Box"
 description: "Rclone docs for Box"
-date: "2015-10-14"
 ---

 {{< icon "fa fa-archive" >}} Box
--- a/docs/content/bugs.md
+++ b/docs/content/bugs.md
@@ -1,7 +1,6 @@
 ---
 title: "Bugs"
 description: "Rclone Bugs and Limitations"
-date: "2019-08-04"
 ---

 # Bugs and Limitations
--- a/docs/content/cache.md
+++ b/docs/content/cache.md
@@ -1,7 +1,6 @@
 ---
 title: "Cache"
 description: "Rclone docs for cache remote"
-date: "2017-09-03"
 ---

 {{< icon "fa fa-archive" >}} Cache (BETA)
@@ -344,6 +343,8 @@ The username of the Plex user

 The password of the Plex user

+**NB** Input to this must be obscured - see [rclone obscure](/commands/rclone_obscure/).
+
 - Config:      plex_password
 - Env Var:     RCLONE_CACHE_PLEX_PASSWORD
 - Type:        string
--- a/docs/content/changelog.md
+++ b/docs/content/changelog.md
@@ -1,11 +1,70 @@
 ---
 title: "Documentation"
 description: "Rclone Changelog"
-date: "2020-05-27"
 ---

 # Changelog

+## v1.52.2 - 2020-06-24
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.1...v1.52.2)
+
+* Bug Fixes
+    * build
+        * Fix docker release build action (Nick Craig-Wood)
+        * Fix custom timezone in Docker image (NoLooseEnds)
+    * check: Fix misleading message which printed errors instead of differences (Nick Craig-Wood)
+    * errors: Add WSAECONNREFUSED and more to the list of retriable Windows errors (Nick Craig-Wood)
+    * rcd: Fix incorrect prometheus metrics (Gary Kim)
+    * serve restic: Fix flags so they use environment variables (Nick Craig-Wood)
+    * serve webdav: Fix flags so they use environment variables (Nick Craig-Wood)
+    * sync: Fix --track-renames-strategy modtime (Nick Craig-Wood)
+* Drive
+    * Fix not being able to delete a directory with a trashed shortcut (Nick Craig-Wood)
+    * Fix creating a directory inside a shortcut (Nick Craig-Wood)
+    * Fix --drive-impersonate with cached root_folder_id (Nick Craig-Wood)
+* SFTP
+    * Fix SSH key PEM loading (Zac Rubin)
+* Swift
+    * Speed up deletes by not retrying segment container deletes (Nick Craig-Wood)
+* Tardigrade
+    * Upgrade to uplink v1.1.1 (Caleb Case)
+* WebDAV
+    * Fix free/used display for rclone about/df for certain backends (Nick Craig-Wood)
+
+## v1.52.1 - 2020-06-10
+
+[See commits](https://github.com/rclone/rclone/compare/v1.52.0...v1.52.1)
+
+* Bug Fixes
+    * lib/file: Fix SetSparse on Windows 7 which fixes downloads of files > 250MB (Nick Craig-Wood)
+    * build
+        * Update go.mod to go1.14 to enable -mod=vendor build (Nick Craig-Wood)
+        * Remove quicktest from Dockerfile (Nick Craig-Wood)
+        * Build Docker images with GitHub actions (Matteo Pietro Dazzi)
+        * Update Docker build workflows (Nick Craig-Wood)
+        * Set user_allow_other in /etc/fuse.conf in the Docker image (Nick Craig-Wood)
+        * Fix xgo build after go1.14 go.mod update (Nick Craig-Wood)
+    * docs
+        * Add link to source and modified time to footer of every page (Nick Craig-Wood)
+        * Remove manually set dates and use git dates instead (Nick Craig-Wood)
+        * Minor tense, punctuation, brevity and positivity changes for the home page (edwardxml)
+        * Remove leading slash in page reference in footer when present (Nick Craig-Wood)
+        * Note commands which need obscured input in the docs (Nick Craig-Wood)
+        * obscure: Write more help as we are referencing it elsewhere (Nick Craig-Wood)
+* VFS
+    * Fix OS vs Unix path confusion - fixes ChangeNotify on Windows (Nick Craig-Wood)
+* Drive
+    * Fix missing items when listing using --fast-list / ListR (Nick Craig-Wood)
+* Putio
+    * Fix panic on Object.Open (Cenk Alti)
+* S3
+    * Fix upload of single files into buckets without create permission (Nick Craig-Wood)
+    * Fix --header-upload (Nick Craig-Wood)
+* Tardigrade
+    * Fix listing bug by upgrading to v1.0.7
+    * Set UserAgent to rclone (Caleb Case)
+
 ## v1.52.0 - 2020-05-27

 Special thanks to Martin Michlmayr for proof reading and correcting
--- a/docs/content/chunker.md
+++ b/docs/content/chunker.md
@@ -1,7 +1,6 @@
 ---
 title: "Chunker"
 description: "Split-chunking overlay remote"
-date: "2019-08-30"
 ---

 {{< icon "fa fa-cut" >}}Chunker (BETA)
--- a/docs/content/commands/rclone.md
+++ b/docs/content/commands/rclone.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone"
 description: "Show help for rclone commands, flags and backends."
 slug: rclone
@@ -66,7 +65,7 @@ See the [global flags page](/flags/) for global options not listed here.
 * [rclone move](/commands/rclone_move/)	 - Move files from source to dest.
 * [rclone moveto](/commands/rclone_moveto/)	 - Move file or directory from source to dest.
 * [rclone ncdu](/commands/rclone_ncdu/)	 - Explore a remote with a text based user interface.
-* [rclone obscure](/commands/rclone_obscure/)	 - Obscure password for use in the rclone.conf
+* [rclone obscure](/commands/rclone_obscure/)	 - Obscure password for use in the rclone config file
 * [rclone purge](/commands/rclone_purge/)	 - Remove the path and all of its contents.
 * [rclone rc](/commands/rclone_rc/)	 - Run a command against a running rclone.
 * [rclone rcat](/commands/rclone_rcat/)	 - Copies standard input to file on remote.
--- a/docs/content/commands/rclone_about.md
+++ b/docs/content/commands/rclone_about.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone about"
 description: "Get quota information from the remote."
 slug: rclone_about
--- a/docs/content/commands/rclone_authorize.md
+++ b/docs/content/commands/rclone_authorize.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone authorize"
 description: "Remote authorization."
 slug: rclone_authorize
--- a/docs/content/commands/rclone_backend.md
+++ b/docs/content/commands/rclone_backend.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone backend"
 description: "Run a backend specific command."
 slug: rclone_backend
--- a/docs/content/commands/rclone_cat.md
+++ b/docs/content/commands/rclone_cat.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cat"
 description: "Concatenates any files and sends them to stdout."
 slug: rclone_cat
--- a/docs/content/commands/rclone_check.md
+++ b/docs/content/commands/rclone_check.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone check"
 description: "Checks the files in the source and destination match."
 slug: rclone_check
--- a/docs/content/commands/rclone_cleanup.md
+++ b/docs/content/commands/rclone_cleanup.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cleanup"
 description: "Clean up the remote if possible"
 slug: rclone_cleanup
--- a/docs/content/commands/rclone_config.md
+++ b/docs/content/commands/rclone_config.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config"
 description: "Enter an interactive configuration session."
 slug: rclone_config
--- a/docs/content/commands/rclone_config_create.md
+++ b/docs/content/commands/rclone_config_create.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config create"
 description: "Create a new remote with name, type and options."
 slug: rclone_config_create
--- a/docs/content/commands/rclone_config_delete.md
+++ b/docs/content/commands/rclone_config_delete.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config delete"
 description: "Delete an existing remote `name`."
 slug: rclone_config_delete
--- a/docs/content/commands/rclone_config_disconnect.md
+++ b/docs/content/commands/rclone_config_disconnect.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config disconnect"
 description: "Disconnects user from remote"
 slug: rclone_config_disconnect
--- a/docs/content/commands/rclone_config_dump.md
+++ b/docs/content/commands/rclone_config_dump.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config dump"
 description: "Dump the config file as JSON."
 slug: rclone_config_dump
--- a/docs/content/commands/rclone_config_edit.md
+++ b/docs/content/commands/rclone_config_edit.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config edit"
 description: "Enter an interactive configuration session."
 slug: rclone_config_edit
--- a/docs/content/commands/rclone_config_file.md
+++ b/docs/content/commands/rclone_config_file.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config file"
 description: "Show path of configuration file in use."
 slug: rclone_config_file
--- a/docs/content/commands/rclone_config_password.md
+++ b/docs/content/commands/rclone_config_password.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config password"
 description: "Update password in an existing remote."
 slug: rclone_config_password
--- a/docs/content/commands/rclone_config_providers.md
+++ b/docs/content/commands/rclone_config_providers.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config providers"
 description: "List in JSON format all the providers and options."
 slug: rclone_config_providers
--- a/docs/content/commands/rclone_config_reconnect.md
+++ b/docs/content/commands/rclone_config_reconnect.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config reconnect"
 description: "Re-authenticates user with remote."
 slug: rclone_config_reconnect
--- a/docs/content/commands/rclone_config_show.md
+++ b/docs/content/commands/rclone_config_show.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config show"
 description: "Print (decrypted) config file, or the config for a single remote."
 slug: rclone_config_show
--- a/docs/content/commands/rclone_config_update.md
+++ b/docs/content/commands/rclone_config_update.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config update"
 description: "Update options in an existing remote."
 slug: rclone_config_update
--- a/docs/content/commands/rclone_config_userinfo.md
+++ b/docs/content/commands/rclone_config_userinfo.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone config userinfo"
 description: "Prints info about logged in user of remote."
 slug: rclone_config_userinfo
--- a/docs/content/commands/rclone_copy.md
+++ b/docs/content/commands/rclone_copy.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copy"
 description: "Copy files from source to dest, skipping already copied"
 slug: rclone_copy
--- a/docs/content/commands/rclone_copyto.md
+++ b/docs/content/commands/rclone_copyto.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copyto"
 description: "Copy files from source to dest, skipping already copied"
 slug: rclone_copyto
--- a/docs/content/commands/rclone_copyurl.md
+++ b/docs/content/commands/rclone_copyurl.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone copyurl"
 description: "Copy url content to dest."
 slug: rclone_copyurl
--- a/docs/content/commands/rclone_cryptcheck.md
+++ b/docs/content/commands/rclone_cryptcheck.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cryptcheck"
 description: "Cryptcheck checks the integrity of a crypted remote."
 slug: rclone_cryptcheck
--- a/docs/content/commands/rclone_cryptdecode.md
+++ b/docs/content/commands/rclone_cryptdecode.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone cryptdecode"
 description: "Cryptdecode returns unencrypted file names."
 slug: rclone_cryptdecode
--- a/docs/content/commands/rclone_dedupe.md
+++ b/docs/content/commands/rclone_dedupe.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone dedupe"
 description: "Interactively find duplicate files and delete/rename them."
 slug: rclone_dedupe
--- a/docs/content/commands/rclone_delete.md
+++ b/docs/content/commands/rclone_delete.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone delete"
 description: "Remove the contents of path."
 slug: rclone_delete
--- a/docs/content/commands/rclone_deletefile.md
+++ b/docs/content/commands/rclone_deletefile.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone deletefile"
 description: "Remove a single file from remote."
 slug: rclone_deletefile
--- a/docs/content/commands/rclone_genautocomplete.md
+++ b/docs/content/commands/rclone_genautocomplete.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete"
 description: "Output completion script for a given shell."
 slug: rclone_genautocomplete
--- a/docs/content/commands/rclone_genautocomplete_bash.md
+++ b/docs/content/commands/rclone_genautocomplete_bash.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete bash"
 description: "Output bash completion script for rclone."
 slug: rclone_genautocomplete_bash
--- a/docs/content/commands/rclone_genautocomplete_fish.md
+++ b/docs/content/commands/rclone_genautocomplete_fish.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete fish"
 description: "Output fish completion script for rclone."
 slug: rclone_genautocomplete_fish
--- a/docs/content/commands/rclone_genautocomplete_zsh.md
+++ b/docs/content/commands/rclone_genautocomplete_zsh.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone genautocomplete zsh"
 description: "Output zsh completion script for rclone."
 slug: rclone_genautocomplete_zsh
--- a/docs/content/commands/rclone_gendocs.md
+++ b/docs/content/commands/rclone_gendocs.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone gendocs"
 description: "Output markdown docs for rclone to the directory supplied."
 slug: rclone_gendocs
--- a/docs/content/commands/rclone_hashsum.md
+++ b/docs/content/commands/rclone_hashsum.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone hashsum"
 description: "Produces a hashsum file for all the objects in the path."
 slug: rclone_hashsum
--- a/docs/content/commands/rclone_link.md
+++ b/docs/content/commands/rclone_link.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone link"
 description: "Generate public link to file/folder."
 slug: rclone_link
--- a/docs/content/commands/rclone_listremotes.md
+++ b/docs/content/commands/rclone_listremotes.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone listremotes"
 description: "List all the remotes in the config file."
 slug: rclone_listremotes
--- a/docs/content/commands/rclone_ls.md
+++ b/docs/content/commands/rclone_ls.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone ls"
 description: "List the objects in the path with size and path."
 slug: rclone_ls
--- a/docs/content/commands/rclone_lsd.md
+++ b/docs/content/commands/rclone_lsd.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsd"
 description: "List all directories/containers/buckets in the path."
 slug: rclone_lsd
--- a/docs/content/commands/rclone_lsf.md
+++ b/docs/content/commands/rclone_lsf.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsf"
 description: "List directories and objects in remote:path formatted for parsing"
 slug: rclone_lsf
--- a/docs/content/commands/rclone_lsjson.md
+++ b/docs/content/commands/rclone_lsjson.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsjson"
 description: "List directories and objects in the path in JSON format."
 slug: rclone_lsjson
--- a/docs/content/commands/rclone_lsl.md
+++ b/docs/content/commands/rclone_lsl.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone lsl"
 description: "List the objects in path with modification time, size and path."
 slug: rclone_lsl
--- a/docs/content/commands/rclone_md5sum.md
+++ b/docs/content/commands/rclone_md5sum.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone md5sum"
 description: "Produces an md5sum file for all the objects in the path."
 slug: rclone_md5sum
--- a/docs/content/commands/rclone_mkdir.md
+++ b/docs/content/commands/rclone_mkdir.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone mkdir"
 description: "Make the path if it doesn't already exist."
 slug: rclone_mkdir
--- a/docs/content/commands/rclone_mount.md
+++ b/docs/content/commands/rclone_mount.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone mount"
 description: "Mount the remote as file system on a mountpoint."
 slug: rclone_mount
--- a/docs/content/commands/rclone_move.md
+++ b/docs/content/commands/rclone_move.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone move"
 description: "Move files from source to dest."
 slug: rclone_move
--- a/docs/content/commands/rclone_moveto.md
+++ b/docs/content/commands/rclone_moveto.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone moveto"
 description: "Move file or directory from source to dest."
 slug: rclone_moveto
--- a/docs/content/commands/rclone_ncdu.md
+++ b/docs/content/commands/rclone_ncdu.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone ncdu"
 description: "Explore a remote with a text based user interface."
 slug: rclone_ncdu
--- a/docs/content/commands/rclone_obscure.md
+++ b/docs/content/commands/rclone_obscure.md
@@ -1,18 +1,30 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone obscure"
-description: "Obscure password for use in the rclone.conf"
+description: "Obscure password for use in the rclone config file"
 slug: rclone_obscure
 url: /commands/rclone_obscure/
 # autogenerated - DO NOT EDIT, instead edit the source code in cmd/obscure/ and as part of making a release run "make commanddocs"
 ---
 # rclone obscure

-Obscure password for use in the rclone.conf
+Obscure password for use in the rclone config file

 ## Synopsis

-Obscure password for use in the rclone.conf
+In the rclone config file, human readable passwords are
+obscured. Obscuring them is done by encrypting them and writing them
+out in base64. This is **not** a secure way of encrypting these
+passwords as rclone can decrypt them - it is to prevent "eyedropping"
+- namely someone seeing a password in the rclone config file by
+accident.
+
+Many equally important things (like access tokens) are not obscured in
+the config file. However it is very hard to shoulder surf a 64
+character hex token.
+
+If you want to encrypt the config file then please use config file
+encryption - see [rclone config](/commands/rclone_config/) for more
+info.

 ```
 rclone obscure password [flags]
--- a/docs/content/commands/rclone_purge.md
+++ b/docs/content/commands/rclone_purge.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone purge"
 description: "Remove the path and all of its contents."
 slug: rclone_purge
--- a/docs/content/commands/rclone_rc.md
+++ b/docs/content/commands/rclone_rc.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rc"
 description: "Run a command against a running rclone."
 slug: rclone_rc
--- a/docs/content/commands/rclone_rcat.md
+++ b/docs/content/commands/rclone_rcat.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rcat"
 description: "Copies standard input to file on remote."
 slug: rclone_rcat
--- a/docs/content/commands/rclone_rcd.md
+++ b/docs/content/commands/rclone_rcd.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rcd"
 description: "Run rclone listening to remote control commands only."
 slug: rclone_rcd
--- a/docs/content/commands/rclone_rmdir.md
+++ b/docs/content/commands/rclone_rmdir.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rmdir"
 description: "Remove the path if empty."
 slug: rclone_rmdir
--- a/docs/content/commands/rclone_rmdirs.md
+++ b/docs/content/commands/rclone_rmdirs.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone rmdirs"
 description: "Remove empty directories under the path."
 slug: rclone_rmdirs
--- a/docs/content/commands/rclone_serve.md
+++ b/docs/content/commands/rclone_serve.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve"
 description: "Serve a remote over a protocol."
 slug: rclone_serve
--- a/docs/content/commands/rclone_serve_dlna.md
+++ b/docs/content/commands/rclone_serve_dlna.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve dlna"
 description: "Serve remote:path over DLNA"
 slug: rclone_serve_dlna
--- a/docs/content/commands/rclone_serve_ftp.md
+++ b/docs/content/commands/rclone_serve_ftp.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve ftp"
 description: "Serve remote:path over FTP."
 slug: rclone_serve_ftp
--- a/docs/content/commands/rclone_serve_http.md
+++ b/docs/content/commands/rclone_serve_http.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve http"
 description: "Serve the remote over HTTP."
 slug: rclone_serve_http
--- a/docs/content/commands/rclone_serve_restic.md
+++ b/docs/content/commands/rclone_serve_restic.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve restic"
 description: "Serve the remote for restic's REST API."
 slug: rclone_serve_restic
--- a/docs/content/commands/rclone_serve_sftp.md
+++ b/docs/content/commands/rclone_serve_sftp.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve sftp"
 description: "Serve the remote over SFTP."
 slug: rclone_serve_sftp
--- a/docs/content/commands/rclone_serve_webdav.md
+++ b/docs/content/commands/rclone_serve_webdav.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone serve webdav"
 description: "Serve remote:path over webdav."
 slug: rclone_serve_webdav
--- a/docs/content/commands/rclone_settier.md
+++ b/docs/content/commands/rclone_settier.md
@@ -1,5 +1,4 @@
 ---
-date: 2020-05-27T16:09:49+01:00
 title: "rclone settier"
 description: "Changes storage class/tier of objects in remote."
 slug: rclone_settier
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Nick Craig-Wood	d8144a7e84	Version v1.52.2	2020-06-24 13:49:00 +01:00
Nick Craig-Wood	21f5b1076f	swift: speed up deletes by not retrying segment container deletes Before this fix rclone would continually try to delete non empty segment containers which made deleting lots of files very slow. This fix makes rclone just try the delete once and then carry on which was the original intent of the code before the retry logic got put in.	2020-06-24 13:09:42 +01:00
Nick Craig-Wood	a8cee91929	check: Fix misleading message which printed errors instead of differences See: https://forum.rclone.org/t/tons-of-data-corruption-after-rclone-copy-to-mega-can-rclone-correct-it/17017/7	2020-06-24 13:09:03 +01:00
Nick Craig-Wood	14edaefaa3	mount2,cmount: skip unreliable tests #4171	2020-06-24 13:06:58 +01:00
Nick Craig-Wood	946b73c5fe	test: Don't run unreliable tests on CI #4171	2020-06-24 13:06:53 +01:00
Nick Craig-Wood	07f7854a25	testy: test utility functions	2020-06-24 13:06:49 +01:00
Caleb Case	dfc7393e9c	backend/tardigrade: Upgrade to uplink v1.1.1 This fixes issue #4370 by restoring the correct error response.	2020-06-20 16:47:18 +01:00
Nick Craig-Wood	7f50143805	webdav: Fix free/used display for rclone about/df for certain backends - fixes #4348 Before this change if the server sent us xml like this ``` <D:propstat> <D:prop> <g0:quota-available-bytes/> <g0:quota-used-bytes/> </D:prop> <D:status>HTTP/1.1 404 Not Found</D:status> </D:propstat> ``` Rclone would read the empty XML items as containing 0 After this fix we make sure that we have a value before using it.	2020-06-20 15:16:14 +01:00
Nick Craig-Wood	37308832b1	drive: fix --drive-impersonate with cached root_folder_id Before this fix rclone v1.51 and 1.52 would incorrectly use the cached root_folder_id when the --drive-impersonate flag was in use. This meant that rclone could be looking up the wrong directory ID with unpredictable results - usually all files apparently being missing. This fix makes rclone look up the root_folder_id always when using --drive-impersonate. It does this by clearing the root_folder_id and making a NOTICE message that it is ignoring the cached value. It also stops rclone caching the root_folder_id when using --drive-impersonate. See: https://forum.rclone.org/t/rclone-gdrive-no-longer-returning-anything/17215	2020-06-20 15:03:01 +01:00
Nick Craig-Wood	d5d124c9ee	drive: fix creating a directory inside a shortcut See: https://forum.rclone.org/t/cant-create-new-directory-on-google-drive-remote/17208	2020-06-18 11:16:40 +01:00
NoLooseEnds	8b1f737271	build: fix custom timezone in Docker image Added the tzdata package to fix this ref. See: https://forum.rclone.org/t/rclone-in-docker-uses-tz-as-utc-not-as-provided/17173	2020-06-17 15:29:46 +01:00
Nick Craig-Wood	ed013228ea	errors: add WSAECONNREFUSED and more to the list of retriable Windows errors This adds the missing WSAECONNREFUSED error to the list of errors we can retry under Windows. > Connection refused. No connection could be made because the target > computer actively refused it. It also adds any relevant errors I could see in the error code list. See: https://forum.rclone.org/t/failing-to-upload-large-file-to-b2/17085	2020-06-17 10:46:37 +01:00
Gary Kim	a9b7974196	rcd: fix incorrect prometheus metrics - fixes #4341 This was caused by using the stats group from the context passed in by the rcd rather than the global stats group. Signed-off-by: Gary Kim <gary@garykim.dev>	2020-06-14 10:11:43 +01:00
Zac Rubin	38453bd8ff	sftp: Fix SSH key PEM loading For SSH authentication, `key_pem` should both override `key_file` and not require other SSH authentication methods to be set. Prior to this fix, rclone would attempt to use an ssh-agent when `key_pem` was the only SSH authentication method set. Fixes #4240	2020-06-13 11:51:10 +01:00
Nick Craig-Wood	51ba73afe4	sync: fix --track-renames-strategy modtime Before this change `--track-renames-strategy` was broken. The hashing method it used could declare times that were very close together to be different. The time hash was discarded and instead we check the modification time window on every hash match. Provided that the user doesn't use `--track-renames-strategy` on a huge number of identically sized files this will perform just fine. See: https://forum.rclone.org/t/track-renames-strategy-modtime-doesnt-work/16992/5	2020-06-12 15:39:18 +01:00
Nick Craig-Wood	b782a15f17	drive: fix not being able to delete a directory with a trashed shortcut When we resolve the shortcut we now propagate the trashed status of the shortcut into the resolved item which fixes the issue.	2020-06-12 15:12:02 +01:00
Nick Craig-Wood	1d2edf0789	serve webdav,serve restic: Fix flags so they use environment variables See: https://forum.rclone.org/t/serve-restic-append-only-environment-variable/17050	2020-06-11 19:29:41 +01:00
Nick Craig-Wood	8367261a93	build: fix docker release build action	2020-06-10 16:51:37 +01:00
Nick Craig-Wood	31dc78905e	Version v1.52.1	2020-06-10 16:08:06 +01:00
Nick Craig-Wood	f9493ff1db	build: set user_allow_other in /etc/fuse.conf in the Docker image This allows non root mounts to use the --allow-other flag See: https://forum.rclone.org/t/trying-utilize-docker-for-the-first-time-having-some-issues-with-an-rclone-mount-user-allow-other-error-etc-fuse-conf-has-been-updated-to-allow/16393	2020-06-10 15:51:24 +01:00
Nick Craig-Wood	a5cf531b94	s3: fix --header-upload - Fixes #4303 Before this change we were setting the headers on the PUT request for normal and multipart uploads. For normal uploads this caused the error 403 Forbidden: There were headers present in the request which were not signed After this fix we set the headers in the object upload request itself as the s3 SDK expects. This means that we only support a limited range of headers - Cache-Control - Content-Disposition - Content-Encoding - Content-Language - Content-Type - X-Amz-Tagging - X-Amz-Meta- Note for the last of those are for setting custom metadata in the form "X-Amz-Meta-Key: value". This now works for multipart uploads and single part uploads See also #59	2020-06-10 12:29:23 +01:00
Nick Craig-Wood	04d59fe6bd	lib/structs: factor reflection based structure manipulation into a library	2020-06-10 12:29:23 +01:00
Cenk Alti	cbc448039d	putio: fix panic on Object.Open #4315	2020-06-10 12:22:07 +01:00
Caleb Case	7a8ade4949	backend/tardigrade: Set UserAgent to rclone This provides two things: * It gives Storj insight into which uplink clients are using the network. * It facilitate rclone participating in the Tardigrade Open Source Partner Program https://tardigrade.io/partner/	2020-06-09 20:17:06 +01:00
Nick Craig-Wood	8ab6e2bd1f	lib/file: fix SetSparse on Windows 7 which fixes downloads of files > 250MB Before this change we passed both lpOverlapped and lpBytesReturned as NULL. > If lpOverlapped is NULL, lpBytesReturned cannot be NULL. Even when > an operation produces no output data, and lpOutBuffer can be NULL, > the DeviceIoControl function makes use of the variable pointed to by > lpBytesReturned. After such an operation, the value of the variable > is without meaning. After this change we set lpBytesReturned to a valid pointer. See: https://forum.rclone.org/t/errors-when-downloading-any-file-over-250mb-from-google-drive-windows-sparse-files/16889	2020-06-06 13:14:10 +01:00
Nick Craig-Wood	d5c5811a54	obscure: write more help as we are referencing it elsewhere	2020-06-05 12:49:12 +01:00
Caleb Case	43d21b7e64	backend/tardigrade: Upgrade uplink to v1.0.7 This fixes a regression in the rclone tests from the v1.0.6 upgrade of uplink. The failure was due to an improperly converted error resulting in the wrong type of error.	2020-06-05 10:52:12 +01:00
Nick Craig-Wood	0501b12e17	vfs: fix OS vs Unix path confusion - fixes ChangeNotify on Windows See: https://forum.rclone.org/t/windows-mount-polling-not-recognising-all-changes-made-by-another-box/16708	2020-06-03 17:07:04 +01:00
Nick Craig-Wood	723c1dfdc5	s3: fix upload of single files into buckets without create permission Before this change, attempting to upload a single file into an s3 bucket which did not have create permission gave AccessDenied: Access Denied error when it tried to create the bucket. This was masked until `e2bf91452a` was fixed. This fix marks the bucket as OK if a fetch on an object indicates it is OK. This stops rclone thinking it has to create the bucket in the first place. Fixes #4297	2020-06-02 20:06:34 +01:00
Nick Craig-Wood	d6894408b9	build: fix xgo build after go1.14 go.mod update Before this change xgo was getting added to go.mod - the build then failed with go: inconsistent vendoring in /usr/src/rclone: github.com/karalabe/xgo@v0.0.0-20191115072854-c5ccff8648a7: is explicitly required in go.mod, but not marked as explicit in vendor/modules.txt This change gets xgo in GOPATH mode to avoid it getting added to go.mod	2020-06-02 14:02:44 +01:00
Nick Craig-Wood	ac0e831090	docs: remove leading slash in page reference in footer when present	2020-06-02 12:10:30 +01:00
edwardxml	b93ed77495	docs: minor tense, punctuation, brevity and positivity changes for the home page	2020-06-01 16:47:21 +01:00
Nick Craig-Wood	d0a3c40f9a	build: update Docker build workflows - prune docker images to ones we normally build binaries for - add fixed versions - add fetch-depth to fetch the tags so the version number is correct - rename the job names	2020-06-01 16:47:21 +01:00
Matteo Pietro Dazzi	6a9a571d87	build: Build Docker images with GitHub actions	2020-06-01 16:47:21 +01:00
Nick Craig-Wood	6b68d1f79a	build: remove quicktest from Dockerfile This is making docker builds take too long and it isn't the place of the Docker file to be running unit tests.	2020-06-01 16:47:21 +01:00
Nick Craig-Wood	088756ff8a	build: update go.mod to go1.14 to enable -mod=vendor build When the main module contains a top-level vendor directory and its go.mod file specifies go 1.14 or higher, the go command now defaults to -mod=vendor for operations that accept that flag.	2020-06-01 16:47:21 +01:00
Nick Craig-Wood	4c1ffcc36d	docs: remove manually set dates and use git dates instead	2020-06-01 13:10:08 +01:00
Nick Craig-Wood	e5bd3f1c26	docs: Add link to source and modified time to footer of every page	2020-06-01 13:09:58 +01:00
Nick Craig-Wood	e03b4e2ce9	cmd: Note commands which need obscured input in the docs - fixes #4252	2020-05-31 12:59:29 +01:00
Nick Craig-Wood	6054476c9c	drive: fix missing items when listing using --fast-list / ListR This is caused by a bug in Google drive where, in some circumstances querying for "(A in parents) or (B in parents)" returns nothing whereas querying for "A in parents" and "B in parents" separately works fine. This has been reported here: https://issuetracker.google.com/issues/149522397 This workaround detects this condition by seeing if a listing for more than one directory at once returns nothing. If it does then it retries each one individually. This can potentially have a false positive if the user has multiple empty directories which are queried at once. The consequence of this will be that ListR is disabled for a while until the directories are found to be actually empty in which case it will be re-enabled. Fixes #3114 and Fixes #4289	2020-05-31 11:45:24 +01:00
Caleb Case	6cd8d3c4a0	backend/tardigrade: Upgrade to uplink v1.0.6 This fixes an important bug with listing that affects users with more than 500 objects in a listing operation.	2020-05-29 18:01:20 +01:00
Nick Craig-Wood	78b0329928	mountlib: fix rc tests when mount does not work This fixed the Docker 1.52 build	2020-05-28 13:13:02 +01:00